The B&G AccuSpray Professional (24000100) is not made to be used with an extension wand; there would not be a way to attach the cable or the other end of the wand to the sprayer tank. The coil does reach up to 6 feet, and the tank will build up to 50 psi which can still spray several feet. We would recommend using a B&G 1 Gallon Sprayer if you need the extra reach of a wand. You could just mix less product at a time if your concern was wasting product.
According to the B&G AccuSpray Professional manual instructions, you can mix chemicals when using this sprayer. You want to follow the product label tank mixing instructions before to ensure they are compatable. Examples of tank mixing chemicals would be Talstar & ExciteR or Temprid & Gentrol IGR for crack and crevice applications inside the home along baseboards, windows, door entry points, under cabinets, around pipes, etc.
Mixing and Filling:
• Mix insecticides for the Professional ACCU-Spray in a separate container and then add 16 oz to the bottle.
• Wh en mixing insecticides for the standard ACCU -Spra y (plastic bottle), note the 16 oz. (473 ml) mark on the side and mix insecticide accordingly.
• Follow all label directions when mixing insecticides.
• Add only 16 oz. (473 ml) of liquid to the bottle to maintain proper head space for air pressure.
No, the B&G AccuSpray Professional (24000100) is designed for spraying liquids only. We do sell a variety of dusters that can be used instead.
RoundUp products should be mixed and applied in a gallon tank sprayer and shoud not be used with the B&G AccuSpray Professional.
The Boracare is not advised to be used in the B&G Accuspray Professional and it is not a foaming applicator. Although Foaming is the preferred method when treating voids, to foam a product you need a poly foamer to apply the foam and our ProFoam Foaming Concentrate which is an expanding liquid you need to mix with the solution. You would mix the Bora-Care with water in a one gallon poly foamer, then pour in the foaming agent, then mix it all together and pump up the poly foamer. You are now ready to foam voids.