The B&G handheld pump sprayers are offered with a 9", 18" and 24" wand. The B&G 24'' SS Extension (VE-164-SS) (22045710) can be used for extending the reach of B&G Sprayers.
To attach a B&G 24" stainless steel extension to an 18" Extenda-Ban, simply screw the threaded end of the extension directly onto the female threaded connection on the end of the Extenda-Ban valve body; ensure the O-ring on the extension is properly seated before tightening securely with a wrenchView the product manual HERE and for further technical assistance, B&G can be reached at 1-800-544-8811 or by emailing at [email protected]
Yes, oil based products like EcoVia EC can be used in the B&G Sprayer 1 Gallon 18 in. Wand & Extenda-Ban Valve (N124-S-18). It would be recommended to thoroughly clean the sprayer after use with a sprayer cleaner to remove any residual
There are many B&G Sprayers that use stainless steel for the tank. Please review the B&G Sprayer page and let us know if you have any questions.
Yes, it is fine to use different products out of the same sprayer such as the B&G Sprayer 1 Gallon 18 in. Wand & Extenda-Ban Valve (N124-S-18), as long as you triple rinse the sprayer and wash it out thoroughly. Triple rinse means to rinse out the inside of the sprayer 3 times, and also fill it with water and run clean water through the hose for at least 1 minute to make sure that there is no residual left in the hose in addition to the tank. We also sell tank cleaners that are excellent for removing any possible residual from your sprayer.
The tip that comes with the B&G Sprayer 1 Gallon 18 in. Wand (N124-S-18) is the 4 Way Tip 5800 that features 2 sizes of pin-stream and 2 sizes of fan spray patterns. The B G 5800-CC Multeejet Crack and Crevice Tip has a small opening to allow you to insert a small straw to perform a crack and crevice treatment.
There are replacement parts available for every part of the B&G Sprayer 1 Gallon 18 in Wand (N124-2-18). The B&G Gasket Repair Kit has all the parts to completely rebuild 1 sprayer.
The rubber gasket inside the pump is the called the Pump Gasket Part P-268
Your B&G Sprayer 1 Gallon 18 in. Wand (N124-S-18) tip could be clogged. We recommend to take a soft brush and try to clean it out. We do sell the B&G Sprayer Maintenance Kit here.
You did the right thing. The hose of the B&G Sprayer 1 Gallon 18 in. Wand is not supposed to swivel, it is fixed in one position when tightened.
The only sprayers that come with a true tip shut-off are B&G Sprayers such as the B&G 1 Gallon Pump Sprayer. You can purchase different tips for B&G sprayers, however they will only fit sprayers from this manufacturer. To reduce drip from the product left in the wand when spraying, you can release the tank pressure, hold your wand up vertically, and then squeeze the trigger to release some of the extra product.
The tip that comes with the B&G Sprayer 1 Gallon 18 in. Wand (N124-S-18) is the 4 Way Tip 5800 that features 2 sizes of pin-stream and 2 sizes of fan spray patterns. The B&G 5800-CC Multeejet Crack and Crevice Tip has a small opening to allow you to insert a small straw to perform a crack and crevice treatment.
The B&G Sprayer N124-S-18 has a fine fan, coarse fan, pin stream and a second pin stream tip.