Bora-Care will kill all types but might not be the best choice depending on the type you have. Subterranean termites and dry wood termites are two very different insects that require two very different treatments. We recommend that you get your termite infestation identified before you select a treatment method to be sure you are choosing the proper treatment method. Here two articles that can help you learn the differences between the two types of termites: Drywood Termites or Subterranean Termites. If you are still unsure after reading the articles you can always call in a professional company. Almost all termite companies will offer a free inspection and they will tell you what type of termites you are dealing with and how they recommend treating for the. At that point you can choose to hire them or do it your self. Termidor SC is the top termite product on the market. Termidor is completely undetectable by termites and once termites touch it they contact, ingest and spread the termiticide until it eliminates the entire colony. Termidor controls all types of termites including Subterranean, Formosan, and Drywood termites though the application method will be different for each type of termite.
No, Boracare is not labeled for carpenter bees.
For carpenter bees, we would recommend using our Carpenter Bee Kit. It has everything you need to do a complete treatment for bees.
Please also check out our Carpenter Bee Guide for more tips on how to treat and prevent them in the future.
We would recommend giving the Bora-Care at least 24 to 48 hours to dry completely. Factors that could prevent the Boracare from drying complete within that time frame include applying to finished or treated wood, failing to mix the product completely before application, mixing too much Boracare concentrate for the amount of water (less than 1:1 dilution), or extreme weather conditions such as a very cold or humid environment. If the wood is very old and the moisture content is very low, that would also prevent the Boracare from absorbing as quickly or easily. If you applied the Boracare to raw wood surfaces, then it should eventually dry. It is common to continue to see some beetle activity after Boracare application since the Boracare cannot completely prevent dormant beetles from emerging. If you still have concerns about the texture after several days, you can also give Nisus (the manufacturer) a call for assistance at 800-264-0870.
Bora-Care mixed at 1:5 ratio would not be strong enough to eliminate an active termite infestation. This requires a 1:1 ratio.
You want the siding to be dry when you are applying Boracare per the label. It needs to be able to soak in to the dry wood.
Unfortunately, Boracare is not labeled to be used as a perimeter treatment on concrete. It is lableled to be used on cellulosic materials including wood, plywood, particle board, oriented strand board, cardboard, and wood composite structural componets only.
You could sand wood that has been treated with BORACARE as long as it is completely dry.
When using Bora-Care children should be out of the area while sparying, and untl the product dries. We would recommend that for pregnant women as well.
Bora-Care is a very safe product and it is considered a green product as well. Typically, it takes about an hour for the surface of the wood to dry. After application has dried completely, it should be perfectly fine for children and pets to re-enter the house.