Crossbow Herbicide is not labeled for bamboo.You can use Round Up QuickPro at the highest listed usage rate to help eliminate bamboo. You will be required to cut the bamboo down to a short stump and then apply the Round Up QuickPro. It can take several applications to achieve the desired results.
According to the label, Crossbow Herbicide should not be used in areas where the water table is shallow and the soil is permeable because it will contaminate the water. We generally recommend that you use any herbicides at least 10-15 feet away from the well.
Crossbow Herbicide could affect desirable woody and viney plants that are sprayed with it. You should avoid spraying desirable vines and trees. We suggest spot treating the target plants and spraying when conditions are calm.
Crossbow is not labeled for use on home lawns so we cannot advise that you can apply along with a fertilizer.
According to the Crossbow product label: Except for lactating dairy animals, there are no grazing restrictions after using this product. They should not be present during the application and while the surfaces are wet but can return when dry.
According to the manufacturer, the Crossbow Herbicide will kill English Ivy.
We would not recommend spraying the Asiatic jasmine with Crossbow Herbicide because it will likely harm that as well.
To get the best result with Crossbow Herbicide you would want to cut the plants back, and then spray it with the herbicide especially if the plants are already matured.
It can take 2 plus weeks after Crossbow Herbicide application to see that plants are dying. You may reapply if needed 30 days after initial application.
You will need to wait at least 3 weeks to plant anything in an area that has been treated with Crossbow Herbicide.
Crossbow Herbicide is labeled to treat for Creeping Charlie (ground ivy). You should use a 1.0 to 1.5% dilution for ground ivy.
Yes, you can hack/chop into the plant you are treaiting and apply Crossbow diluted at 5oz per gallon water.
Yes, Crossbow Herbicide should be effective for wild daisies (oxeye daisy) in established grass fields. You can read more about this noxious plant in this report from UC Davis.
Crossbow Herbicide is not labeled to control poison hemlock so we cannot recommend it for this use. Hi-Yield Range and Pasture 2,4-D Amine is labeled for it and for pastures, but horses should be removed for 7 days after application per the label. Hi-Yield Range and Pasture Dicamba + D is also labeled for it and does not have restrictions for horses grazing in the area. Please refer to each product label to confirm which would fit your needs more for the grass type you have in the pasture
Yes, Crossbow Herbicide can be used to kill ground ivy (creeping charlie). Per the product label, apply at a rate of 2-4 quarts per acre, or 1 1/3 to 2 ounces per gallon of water. Be sure to check the label to be sure this product is safe in the area where you want to apply it.
Depending on what you are treating for, please find product label, you would mix approx. 2oz Crossbow per gallon water. The mix rate will vary according to what you are treating for.
The Crossbow Herbicide product label states it is not for use on home/residential lawns so would not be recommended on new lawns.
Crossbow Herbicide will not affect the bees in the treated area. It is recommended that you spray when they are not actively foraging as to not cause harm to yourself.
When using Crossbow Herbicide, it is recommended that you use at least two days before mowing or two days after mowing. Before mowing would be optimal because the weeds are there and actively growing.
