Per the Crossbow product label: To prevent or control regrowth from cut stumps, mix 4 gallons of Crossbow in diesel oil, No 1 or No 2 fuel oil or kerosent to make 100 gallons of spray mixture.
This breaks down to about 5.12 oz of Crossbow per gallon. So for 1 1/2 gallons you would use approx 10.24 oz of Crossbow
Crossbow Herbicide will not control moss on any surface. For moss in the yard you could use Lilly Miller Moss Out for Lawns. For the asphalt you would use Lilly Miller Moss Out Heavy Duty Cleaner. Unfortunately there is not one product that could control moss in both areas.
Crossbow Herbicide is rainfast in 2 hours so would be fine after that time, but would be best to apply when rain is not expected within 24 hours.
Crossbow is not labeled to control moss. We would recommend a product that is specifically labeled for moss, such as Lilly Miller Moss Out For Lawns.
Crossbow Herbicide is not labeled to be applied to lawns. Q4 would be a better option that is labeled to control dandelion and can be used on turf areas around sport facilities. It would be applied at a rate of 2.6 - 3 oz. per 1,000 sq. ft. (7 - 8 pints per acre). Please refer to the product label for complete instructions.
No, Crossbow Herbicide is not labeled for smilax thorny vine. We are not currently aware of any products that will work on this type of vine. You may want to contact your local Cooperative Extension for assistance controlling this particular plant in your area.
To kill Hemlock trees you want to take hatchet or something like that and make chops into the trunk. Then you would apply the Crossbow undiluted by spraying or painting on the cuts.
The amount of Crossbow you will need to use will depend on the specific type(s) of weeds you are treating. You will need to use 1 1/3 - 5 1/3 oz. of Crossbow per gallon of water depending on the weeds you are treating. Please consult the product label to find the specific rate you will use for your needs.
Crossbow cannot be used on or around anything edible. We would recommend spot treating the violet as much as possible with a glyphosate product such as Roundup QuikPro.
Crossbow is not supposed to harm established grasses, according to the manufacturer. This being said, we always recommend treating a small area first to test the results especially with a sensitve grass species like centipede. As long as your grass is not stressed by drought and it is healthy the grass should not be harmed.
It is recommended that you wait at least three weeks after an application of Crossbow Herbicide before reseeding areas.
Crossbow Herbicide should not be applied before a rain, but is rainfast in 6 hours and it would be recommended to be applied when rain is not expected within 24 hours of application for best results.
The product label for Crossbow Herbicide only lists that it can be used in non crop areas and specifically states: Do not apply directly to, or otherwise permit it to come into direct contact with cotton, grapes, tobacco, vegetable crops, citrus, flowers, fruit or ornamental trees, or other desirable broadleaf plants and do not permit spray mists containing it to drift onto them.
Based on this information, we would not recommend applying it anywhere near the fruit trees.
Crossbow Herbicide is not labeled to kill Creeping Charlie. Depending on what type of grass you have, you could use Tenacity.
It is recommended that you wait at least 2-3 days after mowing to apply Crossbow Herbicide.
According to the manufacturer; Crossbow Herbicide will become rainfast in 4-6 hours after application but it would be recommended to apply when no rain is forecasted within 24 hours. Per the product label, Crossbow is to be used without grazing restrictions. Except for lactating dairy animals there are no grazing restrictions following the application of Crossbow Herbicide.
Yes, the Crossbow Herbicide is non toxic for bees when use in accordance with the product label.
Crossbow Herbicide will stay in the soil and could veggies for up to 2 years. It's possible you could use Tordon. We recommend to contact Dow 800-992-5994 option 4 the manufacturer of both products for the best one to suit your treatment.
Crossbow Herbicide enters the plant through foliage. You do not have to saturate the soil.
Crossbow Herbicide will stay in the soil and could harm veggies for 1 year. We would recommend to wait at least over 1 year to plant a garden in a Crossbow treated area.
