DeltaGard G Granules - Questions & Answers

You would want to apply the DeltaGard G Granules first before the Cy-Kick CS.

When providing a perimeter application to prevent insects (including clover mites) from entering nearby buildings/structures, apply 2-3 lbs/1,000 sq ft of DeltaGard G Granules adjacent to the structure in a 5-10 ft wide band. You could also use Bifen IT to apply to windowframes, doorframes, siding non-edible foliage etc. at a rate of 1 fl oz per gallon of water. DeltaGard Granules can be reapplied 2-3 months from first application and Bifen IT will be applied once monthly.

DeltaGard G Granules are labeled for centipedes but not specifically milllipedes. We would recommend Demand G for the lawn. Please take a few moments to review our treatment article on How to Get Rid of Millipedes for a successful eradication program.

According to Earthway, the Earth Way Ev-en-spread 2750 Model would put out 2lbs per 1,000 sq feet at the 4.5 setting and it would be recommended to move the setting up in 0.5 incriments to spreader setting 5 for approx 3lbs per 1,000 sq feet. Most of the insects on the DeltaGard G Granules are controlled by 2lb - 3lbs product per 1,000sq feet. The manufacturer Earthway stated you want to crank 1 full rotation with every step.

For further instructions, you may contact Earthway directly at 800-294-0671

DeltaGard G Granules are actually not labeled to treat mole crickets.  However, one of our most popular products for mole crickets is Demand G Granules.

Mole Cricket Control Article

The DeltaGard G Granules are our main professional grade granule that we carry that is labeled for leaf cutter ants.  This would be your best option for taking care of leaf cutter ants.

DeltaGuard G is not labeled for grubs.  We carry three granule products that are labeled for grubs, Dylox 6.2, Merit Granules and Demand G. Dylox 6.2 is known to be one of the fastest acting granule products for grub control. You may find our article on grub control helpful.

Grub Control

Unfortunately we do not have any availability information on the Powerforce Granules as we are not the manufacturer and we do not carry over the counter products. We can tell you that Powerforce contains a synthetic pyrethroid as the active ingredient and that we carry several granules that would be very comparable. DeltaGard Granules are actually made by Bayer which is the same manufacturer that makes Powerforce.

No, DeltaGard G Granules cannot be used on concrete areas. DeltaGard G Granules are only labeled to be used in lawns, ground covers, and perimeter treatments in soily areas. In this instance I would recommend Alpine WSG instead. Alpine WSG (water soluble granule) is a non-pyrethroid, non-repellent broad spectrum insecticide that uses the active ingredient Dinotefuran. Dinotefuran has been granted Reduced Risk status for public health use by the EPA. Alpine WSG can be used in attics and eaves; on exterior hard surfaces like sidewalks, driveways, patios and porches. You would simply mix one packet per gallon of water and spray the treatment area. Allow the treated are to fully dry before re-entry.

There are no products that you can use in your pool for springtails. You can use Demand granules or Deltagard granules around the perimeter of your pool to help eliminate this pest before they make into the water. You can spread the granules in a 5 ft - 10ft band in the soil/grass around the pool. you want will want to use 2-3 lbs per 1,000 sq ft  for best results.  Springtail can be hard to control because they reproduce very fast and they thrive in damp, humid areas. You should remove as mulch, leaf debris and other yard debris as possible to help eliminate harborage areas in your yard.

DeltaGard is effective against Harvester ants if you can locate and treat the nest directly. Be sure to use at least 2 teaspoons per mound and water in. 

Yes, DeltaGard G Granules can be applied after Merit has been applied and watered in to get down into the soil and has dried.

DeltaGuard G Granules is available in a 20 lb. bag (9.07 ltr.), which treats up to 10,000 sq. ft. of area. This is a granule product that is applied using a spreader, not a liquid formulation.

DeltaGard G Granules is not labeled for moles. Please take a few minutes to read over our mole control guide to learn what is needed to control them.

Per the product label, if skin is exposed to DeltaGard G Granules you would rinse the area with soap and water for 15-20 minutes. If further questions, contact Poison Control. 

You would want to apply DeltaGard G Granules - 20 lb. bag every 2 to 3 months and make sure you water in the granules for faster results once you apply it. You can also apply before a rain event instead of watering the granules in yourself.

DeltaGard Granules have the active ingredient Deltamethrin. Sevin Granules contain beta-cyfluthrin and bifenthrin, which are similar active ingredients, but not exactly the same as the one in the DeltaGard. Since these are different active ingredients, there will be different amounts of active ingredient. Sevin Granules are labeled to control fleas and many other common crawling pests. Talstar XTRA Granules have the same active ingredients as the Sevin granules, however it has slightly more active ingredient and is a professional version of that product. You can use any of these for general lawn and perimeter pest prevention. 

We also have more tips in our General Pest Prevention Guide here.

According to the product label, DeltaGard G Granules should be irrigated with 1/4" to 1/2" of water or enough to thoroughly moisten grass and thatch, and dissolve the insecticide granules.  Some people prefer to apply before rain is expected, in order to avoid having to water the treatment area manually, but it would not be recommended to apply this product before snowfall.