Demand CS would be a good choice to use around the inside and outside of your home to eliminate centipedes. Suspend SC is safe for people and pets when used as directed on the product label. Indoors you can apply Suspend SC to door frames, window frames, places where utilities enter into the structure, and any other place where the insects can gain entry. Outdoors you should apply the product to door frames, window frames, places where utilities enter into the structure, around the bottom of the foundation and out onto the ground directly around the foundation. You can also limit favorable conditions that the centipedes need to thrive.
Remove Favorable Conditions
Demand CS is applied indoors once every three months to the interior cracks and crevices and outdoors monthly. It is great for many insects including scorpions. In fact, our Scorpion Control Kit contains Demand CS.
Demand CS is not labeled for grubs but we do offer products that are effective. Please take a few moments to review our article on How to Get Rid of Grubs for the best results.
No, Demand CS is not labeled to kill mold. It is only an insecticide.
The only mold remediation product we sell is Boracare with Mold-Care, which can be used on raw structural wood for mold remediation and prevention.
The Chapin Slide Pump Sprayer would likely suit your needs well.The brass pump develops pressure up to 150 psi and allows you to reach targets over 30 feet away! Perfect for spraying the eaves of your home or any hard to reach areas. You can see a video of the sprayer in use here:
http://www.domyownpestcontrol.com/chapin-slide-pump-sprayer-6002-p-704.html
Demand CS should only be used around the baseboards, cracks and crevices in an attic. This product should not be sprayed on insulation since it is diluted in water. A better option may be to use insecticide dust such as Delta Dust in the attic.
Demand CS is rainfast after it has dried completely. If the product was applied and it rained soon after and the product was not dry yet, it will need to be re-applied.
Demand CS is not labled to control dust mites in the home. We would suggest using a product like Bedlam Insecticide in labeled areas for residual control, and a product like Sterifab in areas where you want a contact kill on any surface and in areas you can't spray Bedlam.
The bottle for Demand CS has a measuring chamber on it to measure out the rate you need to use per gallon. For spiders you would use 0.4 to 0.8 fl oz per gallon of water as directed on the product label. You would squeeze the bottle to get the needed amount into the chamber then pour into your sprayer.
Demand CS can be applied to the St. Augustine turfgrass but should NOT be applied to fruit trees. We do carry products for edible vegetation. Please let us know if you need further assistance.
You can use soap and water or mineral spirits to clean out your backpack sprayer after using Demand CS with it.
Demand CS will kill ants that have come into contact with the areas treated with the product but it will not reach the nesting locations. Harvester ants should be left alone if they are not a direct threat or nuisance. They provide food for many animals, and also help distribute grass seed, and are overall beneficial. However, if control becomes necessary, you can easily get rid of harvester ants using the right professional products.Granular ant baits are the best choice to control harvester ants. Nearly any granular ant bait will work, but look for those labeled for use on harvester ants.Products with abamectin, like Advance 375A Select Granular Ant Bait, bifenthrin, like Talstar PL Granules and hydramethylnon, like Maxforce Complete Granular Bait, among many others, will all be effective against harvester ants. Always follow the label instructions carefully, but 2-5 tablespoons of granular bait scattered over the colony’s central opening should be sufficient to control the colony. For non-chemical control, destroy nests and habitat with regular mowing and other lawn maintenance.
Yes, Demand CS an be used for spider mites on dahlias.
There really is not a specific date or temperature (as long as it is above freezing) to apply Demand CS. It can be applied any time the pest(s) you are treating for are active. If you are treating outdoors, you will need to apply every 30-90 days, and every 90 days indoors.
Demand CS a micro-encapsulated product and would give you a 90 day residual. Depending on the pest you are treating for you can may applications monthly if needed. Please refer to the product label for specific applications times.
Demand CS is labeled to eradicate carpenter bees and is great for a surface application and cracks and crevices. We also recommend dusting the holes with an insecticide dust. Please take a few moments to review our treatment article on How to Get Rid of Carpenter Bees for a successful eradication program.
The Demand CS label does not list butterfiles on the labels, however, to be sure you are not contacting them while applying, apply in the early morning or late evening when bees, butterflies and many other insects are less active in the area.
If it's the area that's fenced off, you can spray Demand CS around the yard and flowers but avoid the blooms or areas where bees and butterflies land so it won't be harmful to them.
Yes, Demand CS is labeled for Japanese beetles and can be applied to rose bushes (do not apply directly to blooms).
Demand CS is not labeled for grubs but we do offer products that are effective. Demand CS is listed for flying and crawling insects. Please take a few moments to review our article on How to Get Rid of Grubs for the best results. You would treat the flying and crawling insects with either Demand CS or Talstar P. Talstar P is not labeled for grubs also.
When applying ImidaPro 2SC for grub control, it is important to use sufficient water when applying to move the active ingredient through the thatch layer of grass into the soil where the insects will be or are feeding as soon as possible. This is usually an extra 1/4 inch to 1/2 inch of rainfall or irrigation with the application. As long as you do not have excessive rainfall while the application is still wet, and/or the ground is not saturated, then you should have residual activity for several weeks following the application.
To control White grub larvae, (such as Japanese beetle larvae, Chafers, Phyllophaga spp., Asiatic garden beetle, Oriental beetle) apply 0.46 to 0.6 fluid ounces (14 to 17 mL) per 1,000 sq. ft. Make broadcast applications by mixing specified rate in enough water to uniformly cover the treated area. Do not use less than 2 gallons of water per 1,000 sq. ft. Please refer to the product label for complete application instructions.
