Drive XLR8 Herbicide Crabgrass Killer - Questions & Answers

Displaying 21 to 40 (of 330 questions)
Sort:
  • Asked by Lori from Clermont, Fl
    04/21/2013
    Q
    I have Empire Zoysia grass and I have patches of St. Augustine all through the yard. Will Drive XLR8 kill the St. Augustine without harming my Zoysia?
    A
    Drive is labeled to be safely applied to Zoysia and is known to kill or damage St Augustine grasses.
    Was this answer helpful to you?   Yes No
    6 of 6 people found this answer helpful.
  • Asked by Anonymous from East Tennesse
    05/02/2013
    Q
    What is the dilution rate in ounces per gallon sprayed for Drive XLR8?
    I use a hose end sprayer so I need the ounces per gallon setting.
    A
    The first thing you need to know when using an herbicide such as Drive XLR8 Herbicide is that the exact amount of water you dilute it with is not important. It is only important to make sure you are using the correct amount of product per 1,000 sq ft of lawn. Use too much and you risk damaging your lawn, use too little and you will not get adequate results. You will need to use 1.45 oz per 1,000 sq ft . To decide how much water you want to use, you should mark a 1,000 sq ft area, fill your sprayer with water ONLY, and start walking and spraying just as if you were doing the actual application of herbicide. When you are done walking and spraying the 1,000 sq ft area note how much water it took you to spray that area, and that is the amount you will want to mix 1.45 oz of product with for each 1,000 sq ft area that needs to be treated. You will need to make sure treated areas are irrigated with at least 1/2 inch of water (either by rainfall or by sprinkler) following the application.
    Was this answer helpful to you?   Yes No
    10 of 39 people found this answer helpful.
  • Asked by Dan from Grand Have Mi
    05/05/2013
    Q
    Is Drive XLR8 safe for pets?
    A
    Drive XLR8 is safe for pets to be around after the treated areas have dried. We would not recommend using this product where animals would be grazing.
    Was this answer helpful to you?   Yes No
    69 of 73 people found this answer helpful.
  • Asked by Eddie from New Rochelle, Ny
    07/15/2013
    Q
    Alternative recommendation for Drive XLR8?
    I live in NY and see that Drive XLR8 can't be shipped to NY, do you have an alternative recommendation for post emergent crabgrass killer? I have a typical NE lawn (Kentucky bluegrass and tall rescue). Many thanks!
    A
    You could use the product called QuinKill Max Crabgrass and Weed Killer. It is actually the same product as the Drive just made by a different manufaturer who happened to have registered their product with your state. You can see the full instructions of how to use it on the Product Label. Please let us know if you have any other questions.
    Was this answer helpful to you?   Yes No
    5 of 5 people found this answer helpful.
  • Asked by Mani from Connecticut
    07/28/2013
    Q
    How much water and Drive XLR8 I should mix in 2 gallon sprayer tank?
    A
    The first thing you need to know when using an herbicide such as Drive XLR8 Herbicide is that the exact amount of water you dilute it with is not important. It is only important to make sure you are using the correct amount of product per 1,000 sq ft of lawn. Use too much and you risk damaging your lawn, use too little and you will not get adequate results. You will need to use 1.45 oz per 1,000 sq ft . To decide how much water you want to use, you should mark a 1,000 sq ft area, fill your sprayer with water ONLY, and start walking and spraying just as if you were doing the actual application of herbicide. When you are done walking and spraying the 1,000 sq ft area note how much water it took you to spray that area, and that is the amount you will want to mix 1.45 oz of product with for each 1,000 sq ft area that needs to be treated. You will need to make sure treated areas are irrigated with at least 1/2 inch of water (either by rainfall or by sprinkler) following the application.
    Was this answer helpful to you?   Yes No
    6 of 19 people found this answer helpful.
  • Asked by Luanne from Suffolk, Va
    07/29/2013
    Q
    How much DyneAmic Surfactant do I need for each bottle of Drive XLR8?
    How much DyneAmic Surfactant do I need for each bottle of Drive XLR8?
    A
    You can use  3-5 fl oz of Dynemic in 1-5 gals of spray solution, so for one half gallon of Drive XLR you would want to use approx. 1 gallon of Dynemic.
    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Jean
    08/01/2013
    Q
    What products to kill: crabgrass, quackgrass, foxtails, purslane, plantain and clover in my lawn?
    Hi I am from Montreal, Canada. I have crabgrass, quack-grass, fox-tails, purslane, plantain and clover in my lawn. I have 21,000 square feet of lawn. I planned to use more than one time over the years. Witch products should I buy? And We are planned to go pick-up the products on August 12. Do have it in stock?
    A

    Drive XLR8 is a great post emergent product to treat all of the weeds you listed.  Please check the product label to ensure your turf will tolerate Drive XLR8.Yes, we do have these products in stock. You can always contact us at 866-581-7378 as well.

    Was this answer helpful to you?   Yes No
    13 of 13 people found this answer helpful.
  • Asked by Leo from Rockville, Maryland
    08/03/2013
    Q
    I just bought 1/2 gallon of Drive XLR8, but I am not sure the ratio of it to mix with water. 1:2 or 1:3 ?
    A
    Please let us know what weed you are trying to eliminate and in what grass you are treating in so that we may give you the correct dilution rate.
    Was this answer helpful to you?   Yes No
    2 of 5 people found this answer helpful.
  • Asked by John from Cape Girardeau Mo
    08/04/2013
    Q
    Can I tank mix Drive XLR8 with 2,4-D with Trimec?
    A
    Per the Drive XLR8 product label it is labeled to be tank mixed with 2, 4-D, triclopyr, or other broadleaf herbicides to increase spectrum of control.
    Was this answer helpful to you?   Yes No
    272 of 295 people found this answer helpful.
  • Asked by Becky from Oakley, Illinois
    08/09/2013
    Q
    Does Drive kill other weeds as well as crabgrass, such as clover, creeping charlie, etc?
    A
    Drive is labeled for many types of weeds. Bindweed, Crabgrass, Clover, Dandelion, Dollarweed, Foxtail, Kikuyugrass, Signalgrass, Speedwell, Torpedograss, and more. Please refer to the product label for the complete list.
    Was this answer helpful to you?   Yes No
    0 of 3 people found this answer helpful.
  • Asked by Mark from Boston, Ma
    08/18/2013
    Q
    When can I re-apply Drive XLR8 to spots I missed?
    Great result--dead crabgrass, raked away.
    A
    You can reapply the Drive for missed spots 14 days after your first application of the product.
    Was this answer helpful to you?   Yes No
    56 of 60 people found this answer helpful.
  • Asked by Ron from Ormond Beach, Fl
    08/26/2013
    Q
    Drive to Kill St. Augintine and Torpedo Grass
    I plan on replacing St. Augustine with Zoysia in the spring. Would it be more efficient to use Drive XLR now to kill everything instead of using RoundUp Pro Max?
    A
    You may fair better with using the Roundup or any other Glyphosate product like it if you plan to take it to bare ground to reseed anyways. If there are more weeds and weedy grasses like crabgrass than actual lawn that would ensure you got all of the problem plants. Whereas using the Drive will eliminate many problem weeds/grasses however may not eliminate all of the ones in your lawn if they aren't all on the product label.
    Was this answer helpful to you?   Yes No
    0 of 1 people found this answer helpful.
  • Asked by Brad from Nj
    08/29/2013
    Q
    How long after a treatment with Drive XLR8 do I need to wait to aerate and seed and topdress?
    A
    How long you need to wait to reseed is really dependent on what you are seeding. Youc an see the "reseeding" chart on page 9 of product label to determine the correct timing for your needs: Product Label
    Was this answer helpful to you?   Yes No
    1 of 2 people found this answer helpful.
  • Asked by Ma from Montreal, Quebec
    09/07/2013
    Q
    Can I mix Drive XLR8 with PAR III?
    I read some of your earlier answers but I wanted to double check. I have a major crabgrass problem along with other weeds (clovers, dandelions and so on). My grass is mostly Kentucky blue grass and fescue.
    A
    We apologize, but we are unsure which product you are asking to mix with Drive XLR8? Please contact BASF 800-526-1072 manufacturer of Drive XLR8 to see if the two products are compatable.
    Was this answer helpful to you?   Yes No
    1 of 4 people found this answer helpful.
  • Asked by John from Lincoln Ne
    09/08/2013
    Q
    Will Drive XLR8 Herbicide Crabgrass Killer kill goose grass
    A
    Drive XLR8 Herbicide Crabgrass Killer is not labeled to treat Goose Grass. Southern Ag Vantage Grass killer is a great product to eradicate goos grass. Please refer to the product label to make sure the type of turf you are applying to is tolerant to this product.
    Was this answer helpful to you?   Yes No
    3 of 8 people found this answer helpful.
  • Asked by Chris from Raleigh Nc
    09/12/2013
    Q
    What is the best tempurature or range to apply Drive XLR8?
    A
    When applying Drive XLR8 Herbicide Crabgrass Killer you want to make sure the temp is not below 55 degrees and not above 80 degress.
    Was this answer helpful to you?   Yes No
    63 of 67 people found this answer helpful.
  • Asked by Nick from Nj
    09/16/2013
    Q
    What temperatures does Drive XLR8 work best?
    A
    Drive XLR8 works best when the temperatures are not excessive (hot or cold).  For additional information, please click on the product label link.
    Was this answer helpful to you?   Yes No
    1 of 4 people found this answer helpful.
  • Asked by Sandra from St Louis Mo
    09/17/2013
    Q
    What is the best time of the year to apply Drive XLR8 to fescue in Missouri
    A
    Right now in September through mid October would be a great time to apply Drive XLR8 in Missouri. You may also contact your Local Cooperative Extension Office and speak with the master Gardener,  to pin down the specific dates for application in your area.
    Was this answer helpful to you?   Yes No
    5 of 5 people found this answer helpful.
  • Asked by Diego from Fl
    09/21/2013
    Q
    How many ounces of Drive XLR8 Herbicide Crabgrass Killer will need I to mixed in a backpack sprayer?
    A

    Your dilution rate depends on what you are specifically treating. Please see the Drive XLR8 product label for diltuion rates (see table starting on page 7).

    Was this answer helpful to you?   Yes No
    1 of 9 people found this answer helpful.
  • Asked by Chris from Georgia
    04/22/2014
    Q
    I put down a weed and feed back in March, but weeds are still there but slowly dying.
    Would it be smart to re-apply the weed and feed or simply go with a fertilizer?
    A
    To reapply, all depends on what region you are located in and what you are treating for. If you still see weeds coming up, we may recommend using Drive XLR8 Please review the product label to see if this product will treat your specific weeds and not harm your lawn.
    Was this answer helpful to you?   Yes No
Displaying 21 to 40 (of 330 questions)