Per the Eraser 41% Weed Killer Herbicide Product Label: Mixing Directions: For best results use 2 1/2 oz (5 Tbs) per gallon of water. One gallon of water will treat approximately 300 sq ft. You can also see a chart given with examples of different sprayer types used on page 5 of the product label for other mixing options as well. Keep in mind that with hose end sprayers while you can control on the dial how much it puts out per gallon of water it pulls, there isnt really a way to know how much product you are putting out in a certain time frame so you will want to keep this in mind when spraying to avoid over-applying the product in any one area.
Unfortunately, when using Eraser 41% Weed Killer Herbicide the animals can be reintroduced to the treated area, but you would need to allow at least 7 days between application and allowing animals to graze in the same area. Please let us know if we can be of any further assistance.
Eraser 41% Weed Killer Herbicide should kill treated vegetation for up to a year. We do not recommend spraying it on any desired turfgrass as it is a non-selective so it will not prevent weeds from germinating. We do carry pre-emergent herbicides that will prevent listed grassy weeds and broadleaf weeds from emerging.
Eraser 41% Weed Killer Herbicide is not labeled for bamboo. That does not mean that it may not kill it, just that the manufacturer either didn't test it on it or did and it was not very effective on it. Unfortunately bamboo is very difficult to treat and kill completely. We do have the NuFarm Polaris Herbicide which is labeled for Japanese bamboo that might work for you.
Eraser 41% Weed Killer Herbicide can be used as a spot treatment in veggie gardens.
Eraser 41% Weed Killer Herbicide is a non-selective weed killer and should kill anything it comes in contact with. However, we would recommended a product like Image Kills Nutsedge Concentrate. It would be a better product for the application that you are applying it to, and you would get much better results.
When using Eraser 41% Weed Killer Herbicide, apply to actively growing weeds, preferably before the seed heads form. It’s best to apply on a warm sunny day when daytime temperatures are above 60° F. Weed control is accelerated by warm sunny weather.
If you are treating for annual weeds, you will need to mix 1 1/3 oz. per gallon of water. For mixing the whole gallon of Eraser for annuals, you will need around 96 gallons of water. For perennial weeds, you need 2 2/3 oz. per gallon of water. For mixing the whole gallon of Eraser for perennials, you will need around 48 gallons of water. Please see the product label for complete application instructions.
Eraser would be the same as almost all products on the market and should be used within 24-48 hours of mixing in your tank.
For best results, it is recommended to wait at least 1-2 weeks after applying Eraser 41% Weed Killer Herbicide before planting in the area.
Eraser 41% Weed Killer Herbicide can kill centipede and anything else growing in the area as it is a non selective herbicide. You will need to allow at least 7 days between applying and allowing animals to graze in the same area.
You can plant two weeks after Eraser 41% Weed Killer Herbicide application.
Yes, Eraser Herbicide can be used in your orchard. Be mindful when spraying this product because it will kill whatever it comes in contact with. The mixing ratio is 1.5 fl oz per gallon of water. You will use 36 fl oz in 26 gallons of water.
You will use 2.5 oz (5 Tbs) of Eraser 41% Weed Killer Herbicide per gallon of water for Johnsongrass. 1 gallon of mixed solution will treat approximately 300 square feet.
Yes Eraser 41% Weed Killer Herbicide can be used around livestock. Upon applying the product allow it to dry before reintroducing the animals to the area, and allow at least 7 days in between applying and allowing the animals to graze in the same area.
Yes, the shelf life of Eraser Weed Killer Herbicide is 3-5 years.
Per the product label for Eraser 41% Weed Killer Herbicide Use 2 ½ oz (5 Tbs) in 1 gallon of water which covers 300 sq. ft. (30 ft. x 10 ft) or use for spot treatments. A second application may be required on hard-to-control species such as blackberry, kudzu, or poison oak.
Eraser 41% Weed Killer Herbicide is a post emergent, non selective herbicide so it is only going to kill what is sprayed directly with it. You can use it to spot treat and kill unwanted weeds as necessary and reapply after a week to stubborn weeds if needed.
Eraser 41% Weed Killer Herbicide should be used within 24 hours of mixing with water.
