GrazonNext HL Herbicide is applied at 19-34 fl oz per acre (43,560 sq ft) for horse nettle/bull Netle. The amount of water will depend on how much will cover a 1,000 sq ft uniformly usually 1-2 gallons of water per 1,000 sq ft.
The rate range of GrazonNext HL Herbicide for sweet clover and white clover is 1.2 to 1.5 pints (19 to 24 fluid oz) product per acre. Please be sure to review the product label for more information and complete application instructions.
The rate at which you apply GrazonNext HL Herbicide will depend on the specific type of thistle you are treating. If you are treating yellow starthistle, bull thistle, musk thistle, or plumeless thistle, then you can use 1.2 - 1.5 pints per Acre, which would be 0.44 - 0.5 oz per 1,000 square feet. For sowthistle, prickly sowthistle, Canada thistle, or scotch thistle, you would use 1.5 - 2.1 pints per Acre, or 0.5 - 0.78 oz per 1000 sq ft. For spot treating with a 1-2 gallon sprayer, you would use the 1,000 sq ft rate in 1 gallon of water. For larger areas, the exact amount of water needed with depend upon your spray equipment and at what speed the product is applied. Please refer to the product label for complete application instructions.
GrazonNext HL Herbicide is used at rates of 1.2 – 2.1 pints per acre (19 – 34 oz per Acre) in sufficient water to cover that area. You will need to know first how much area your 25 gallon tank covers (usually ½ acre to 1 acre), and then check Table 3 on the product label for the weeds you are targeting. GrazonNext is limited to 2 applications per year, not to excede more than 2.1 pints per acre per year in any combination. Please refer to the product label for complete instructions and precautions.
GrazonNext HL Herbicide is used at rates of 1.2 – 2.1 pints per Acre (19 – 34 oz per Acre) in sufficient water to cover that area. So you need to know first how much area your 25 gallon tank covers (usually ½ Acre to 1 Acre), and then check Table 3 on the product label for the weeds you are targeting. GrazonNext is limited to 2 applications per year, and do not apply more than 2.1 pints per Acre per year in any combination. Please refer to the product label for complete instructions and precautions.
In order to know how much GrazonNext HL Herbicide to use, then you need to know how much area your 200 gallon sprayer covers. It is most important to use the correct amount of product and consider the water a carrier. For ragweed, for instance, you would use 1.2 to 1.5 pints (19 to 24 fluid oz) product per acre using a minimum of 10 gallons of water per Acre.
GrazonNext HL Herbicide is applied at a rate of 24-34 fl. oz. per acre (43,560 sq. ft.) for buttercup. This would translate approximately to .55 oz. - .78 oz. per 1,000 sq. ft. The amount of water will depend on how much will cover a 1,000 sq. ft. uniformly, which is usually 1-2 gallons of water per 1,000 sq. ft.
You can refer to the manufacturer's product label here for complete application instructions.
For most viney plants, you would use 1.5 – 2.1 pints (24-34 fl oz) of GrazonNext HL Herbicide per Acre. There is a chart on page 4 of the label to convert rates depending on how much area your tank volume will cover. So you would need about 19 – 26 gallons of GrazonNext concentrate to cover that area. Since these are 2 gallon containers, that would be 10-13 containers.
The dilution rates for GrazonNext HL Herbicide will vary depending on the weeds you are targeting and the application site. Please refer to the product label for the appropriate rate for your needs.
You will mix the GrazonNext HL Herbicide at 1.5 pints (24 oz) per 40 gallons of water per acre. For tough to control weeds you may use up to 2.1 pints (34 oz) per acre.