Crossbow may be combined with liquid nitrogen fertilizer suitable for foliar application to accomplish weeding and feeding of grass pastures in one operation per the product label. Use Crossbow in accordance with recommendations for grass pastures as given on this label. Use liquid fertilizer at rates recommended by supplier or Extension Service Specialist. Test for mixing compatibility using desired procedure and spray mix proportions in clear glass jar before mixing in spray tank. A compatibility aid such as Unite or Compex may be needed in some situations. Compatibility is best with straight liquid nitrogen fertilizer solutions. Mixing with N-P-K solutions or suspensions may not be satisfactory even with the addition of compatibility aid. Premixing Crossbow* with 1 to 4 parts water may help in difficult situations. Fill the spray tank about half full with the liquid fertilizer, then add the herbicide with agitation and complete filling the tank with fertilizer. Apply immediately and continue agitation in the spray tank during application. Do not store spray mixture. Application during very cold weather (near freezing) is not advisable.
Crossbow can be applied by all types of sprayers, from hand-held models to tractor-mounted spray rigs. While we don't talk to a lot of customers using that method of application equipment, there is nothing prohibiting the product from being used that way for their direct spot treatment needs.
Crossbow is a non-selective post-emergent herbicide that can kill anything that is sprayed directly including desired turf grasses. We recommend that you treat the teasel by applying a product that will offer post-emergent control but not harm the lawn. We have AmTide MSM 60 DF which is safe for listed turfs and will eradicate the teasel. Please follow instructions on the product label for your application.
Crossbow Herbicide is not labeled for bamboo and likely would not give you any desired results. Bamboo is extremely stubborn, so it can take several steps to remove it completely. You can use Round Up QuickPro at the highest listed usage rate to help eliminate bamboo. You will be required to cut the bamboo down to a short stump and then apply the Round Up QuickPro. It can take several applications to achieve the desired results. You should contact your local cooperative extension office and speak to the master gardener on staff to see if you will be required to till your yard or if you can seed and fertilize only.
Crossbow Herbicide is not labeled to be applied to lawns. Q4 would be a better option that is labeled to control dandelion and can be used on turf areas around sport facilities. It would be applied at a rate of 2.6 - 3 oz. per 1,000 sq. ft. (7 - 8 pints per acre). Please refer to the product label for complete instructions.
No, Crossbow Herbicide is not labeled for smilax thorny vine. We are not currently aware of any products that will work on this type of vine. You may want to contact your local Cooperative Extension for assistance controlling this particular plant in your area.
Crossbow cannot be used on or around anything edible. We would recommend spot treating the violet as much as possible with a glyphosate product such as Roundup QuikPro.
Crossbow Herbicide is a very good option for briars. Please consult the product label to make sure it will be safe to apply around the other vegetation (if any) in the area.
We apologize but we are not able to find a herbicide that will kill the milkweed without killing desireable clovers. You may contact your local cooperative extension office for a recommendation that is successful in your area.
It can take two weeks or more for a burn down with Crossbow Herbicide. You can reapply 30 days after application if needed.
Crossbow can be applied any time that weeds are actively growing. Per the product label, best results have been obtained with late winter to early spring applications.
Crossbow Herbicide can be mixed at anywhere from 1 1/3 oz - 5 1/3 oz of product per gallon of water. When treating harder to kill vegetation such as brush, you may want to mix it at the higher rate. Refer to the product label for specific plants controlled by this product.
It is recommended that you apply Crossbow Herbicide at least 10-15 foot distance away from the swamp to protect any aquatic life.
We recommend to mow at least two days prior to Crossbow Herbicide or two days after application.
Crossbow Herbicide is not labeled to control sandspur aka sandburs nor for use in home lawns. This is a summer weed that is actually easier to prevent then to kill once emerged. We would recommend applying a pre-emergent like Dimension 2-4 weeks ahead of when it germinates. You can check with your County Extension Offices for the correct timing.
Crossbow Herbicide is not labeld for pennyroyal. We recommend contacting your local cooperative extension for a product recommendation that has been proven successful in your area.
Crossbow Herbicide is not labeled to be used on home lawns so would not be recommended to apply to your Bermuda lawn.
You can use plastic, stainless, and/or brass sprayers and parts with Crossbow Herbicide. The biggest concern with equipment when using Crossbow is generally involving reducing the risk of drift to desirable plants.
It is recommended that you wait at least three weeks after an application of Crossbow Herbicide? before reseeding areas, and wait at least 1 year before planting anything edible in that area (including compost).