For Spot treatment using Hi-Yield 2, 4-D Selective Weed Killer in non-crop areas: Use 1 pint in 3 gallons of water or 4 oz. in 3/4 gallon in a hand sprayer. In pastures and range land: Use 3 to 4 oz. in 1 to 3 gallons of water per 1,000 sq. ft. On Ornamental Turf: Use 16 oz. in 1 to 8 gallons of water per 2,725 sq. ft. or 2 gallons in 15 to 50 gallons per acre. Please review the product label for complete usage instructions.
Per the product label for Hi-Yield 2, 4-D Selective Weed Killer, it is recommended that you wait until the next growing season to plant anything. For example, if the product was applied in the spring, items can be planted in the fall and vice versa.
The mixing ratios will vary according to where you are treating and what you are treating for. According to the Hi-Yield 2, 4-D Selective Weed Killer product label: In pastures and range land: Use 3 to 4 oz. in 1 to 3 gallons of water per 1,000 sq. ft.
On Ornamental Turf: Use 16 oz. in 1 to 8 gallons of water per 2,725 sq. ft. or 2 gallons in 15 to 50 gallons per acre.
DO NOT apply at wind speed greater than 15 mph or temperatures above 90 degrees F.
So you will be using roughly 30-50 gallons of water and using about 2 gallons of concentrate per Acre.
Hi-Yield 2, 4-D Selective Weed Killer is a selective, post-emergent herbicide concentrate which controls dozens of broadleaf weeds and other noxious plants susceptible to its active ingredient. It will not kill grasses such as centipede. What type of weeds are you trying to control, grassy or broadleaf, sedges?
<body id="cke_pastebin" >Hi-Yield 2, 4-D Selective Weed Killer is a selective, post-emergent herbicide concentrate which controls dozens of broadleaf weeds and other noxious plants susceptible to its active ingredient. It will not kill grasses such as centipede.
</body>
Yes, Hi Yield 2, 4-D likely would harm Centipede. Hi Yield 2, 4-D is not safe to be used on sensitive grasses such as Zoysia, Centipede and St. Augustine. If you'd like to give us more information about the weeds you need to treat, we'd be happy to help you find an alternative product to use.
Hi-Yield 2, 4-D Selective Weed Killer is a broadleaf weed killer only and will not effect dallisgrass.
Use 1 gallon of Hi-Yield 2, 4-D Selective Weed Killer 15 gallons of water per acre which would break down to 3.4 fl oz per 1,000 sq ft.
For general weed control, you will use 4 oz. of Hi-Yield 2, 4-D Selective Weed Killer per gallon of water. Please see the product label for complete application instructions.
Hi-Yield 2, 4-D Selective Weed Killer iwill kill dandelion. There is a minimum of 30 days between applications of Hi-Yield 2, 4-D Selective Weed Killer and you are limited to 2 applications per year per the product label. For Spot treatment in non-crop areas: Use 1 pint in 3 gallons of water or 4 oz. in 3/4 gallon in a hand sprayer. In pastures and rangeland: Use 3 to 4 oz. in 1 to 3 gallons of water per 1,000 sq. ft. On Ornamental Turf: Use 16 oz. in 1 to 8 gallons of water per 2,725 sq. ft. or 2 gallons in 15 to 50 gallons per acre. DO NOT apply at wind speed greater than 15 mph or temperatures above 90 degrees F. Use a surfactant to increase effectiveness.
The product label does not mention the requirement of a surfactant when applying Hi-Yield 2, 4-D Selective Weed Killer. unless treating specifically for southern wild rose. Per the product label: Adding oil, wetting agent, or other surfactant to the spray may increase effectiveness on weeds but also may reduce selectivity to crops resulting in crop damage.
Hi-Yield 2, 4-D Selective Weed Killer can be applied to and near the following areas: Lawns Ponds, Drainage Ditchbanks, Pastures, Rangelands, Golf Courses, Cemeteries and Parks. Hi-Yield 2, 4-D Selective Weed Killer is labeled for morningglory and should be applied when the weeds are actively growing and healthy. It should not be applied when the weather is cooling down and growth is dormant.
Hi-Yield 2, 4-D Selective Weed Killer is pet safe if used as directed. It should be applied when pets are not present. Pets can return to the treated area and safely resume normal activities once all surfaces are completely dry.
Hi-Yield 2, 4-D Selective Weed Killer is rainfast 4-6 hours after application but is best applied when rain is not expected within 24 hours of application. You are limited to 2 applications per year with 30 days between applications.
Yes, Hi-Yield 2, 4-D Selective Weed Killer works best when applied to dry weeds.
Hi-Yield 2, 4-D Selective Weed Killer is mixed at the rate of 4 oz. per gallon pf water for spot treating.
Hi-Yield 2, 4-D Selective Weed Killer is labeled to control wild onions.
It recommended not to mow within 2 days before or after application of Hi-Yield 2, 4-D Selective Weed Killer.
Hi-Yield 2, 4-D Selective Weed Killer is not labeled for wild yellow turnip plants. We do offer Pature Pro which is labeled for Wild Turnip.
Hi-Yield 2,4-D Selective Weed Killer should not be used around rice or any other edible crops.
Hi Yield 2, 4-D is not safe to be used on sensitive grasses such as Zoysia, Centipede and St. Augustine.
