Hi - Yield 2, 4 - D Selective Weed Killer - Questions & Answers

Displaying 81 to 100 (of 326 questions)
Sort:
  • Asked by Linda from Dawson, Il
    08/05/2014
    Q
    Use of Hi-Yield 2,4-D
    Desire: 1. To spray around shrubs. 2. Kill poison ivy n flower bed by painting leaf with brush. 3. To kill weeds under large trees.4. To kill wild grape vines. I've just heard of your product and I am excited to use it! I've adapted a cylindrical device at the end of my sprayers, to limit coverage of spray pattern n stop drift. Will spray penetrate the ground around shrubs and harm shrubs? How long does your weed killer last? Do you have a weed killer and pre-emergent combo spray? If not, do know of one? Thank you.
    A

    Hi-Yield 2, 4D Selective Weed Killer is labeled for use on lawns, around ponds, drainage ditchbanks, pastures and rangelands. It should not be used on shrubs. It should not penetrate the ground and kill the shrubs. It should last for the entire season but if not, another application can be made after 30 days.

    For a pre-emergence and post-emergent combination, we would recommend using Dimension 2EW. You will use .33 - .73 fl. oz. per 1,000 sq. ft. Please let us know if you have any additional questions.

    Was this answer helpful to you?   Yes No
    8 of 11 people found this answer helpful.
  • Asked by Carol from Leesburg, Ga
    04/03/2018
    Q
    Can I useHi-Yield 2, 4-D Selective Weed Killer directly on Irises?
    I have a lot of grass, goldenrod and other weeds in my iris bed and would like to get rid of them without harming the irises.
    A

    You can use Hi-Yield 2, 4-D Selective Weed Killer as a spot treatment around ornamentals. The manufacturer advised to be very aware of drifting.Grass Out Max can be applied in an iris bed without harming the iris if applied according to the instructions on the product label

     

     

    Was this answer helpful to you?   Yes No
    8 of 10 people found this answer helpful.
  • Asked by Patty from Long Prairie ,mn
    06/27/2015
    Q
    I want to treat my lawn for plantain weeds I have a 15 gallon pull behind sprayer what is ratio for 24d high
    I have mostly kentucky blue grass
    A
    You will use 2 gallons of 2,4-D Selective Weed Killer in 15 to 50 gallons of water per acre or
    Use 16 oz. in 1 to 8 gallons of water per 2,725 sq. ft. The amount of product is what is important when you are using a product like this. Water is only used as a carrier.
    Was this answer helpful to you?   Yes No
    8 of 8 people found this answer helpful.
  • Asked by Shay from Rayne
    06/23/2017
    Q
    Does the yard have to be dry in order to spray Hi-Yield 2, 4-D Selective Weed Killer?
    A

    Hi-Yield 2, 4-D Selective Weed Killer should be applied when the ground is not saturated and rain is not expected for at least 24 hours. 

     

    Was this answer helpful to you?   Yes No
    8 of 8 people found this answer helpful.
  • Asked by Gerald
    01/28/2018
    Q
    Is Hi Yield 2, 4-D Selective Weed Killer pet friendly?
    A

    You will need to keep all pets and children out of the area while you treat using Hi-Yled 2,4-D Selective Weed Killer and until all plant surfaces have dried completely (1-2 hours at most), Once dry it is completely safe for pets to return to the yard and resume normal activity. 

    Was this answer helpful to you?   Yes No
    8 of 9 people found this answer helpful.
  • Asked by Ricky from El Dorado
    03/16/2016
    Q
    Is Hi-Yield 2, 4-D Selective Weed Killer safe to use around gardens?
    A

    Hi-Yield 2, 4-D Selective Weed Killer does not list on the product label that it is safe for use around edibles, only in non-crop areas.  The Avenger Weed Killer Concentrate is safe for use around edible vegetation and fruit trees as it does not persist in the soil and is approved for organic gardening.  Be sure to not spray any of the plants you do not want to kill as it is non-selective and will kill anything to which it is applied.

    Was this answer helpful to you?   Yes No
    8 of 11 people found this answer helpful.
  • Asked by Andy from Clarksville, Tn
    04/29/2016
    Q
    After how long is Hi-Yield 2,4-D rainfast?
    It may rain tonight. It is 11:09 now and I want to apply it in 30 minutes and I was wanting the answer to make my decision.
    A

    In general you want to apply Hi-Yield 2, 4-D Selective Weed Killer when rain is not expected within 24 hours of application,

    Was this answer helpful to you?   Yes No
    8 of 10 people found this answer helpful.
  • Asked by Lamar from Winder
    07/30/2017
    Q
    Will Hi-Yield 2, 4-D Selective Weed Killer kill crabgrass?
    A

    Hi-Yield 2, 4-D Selective Weed Killer is not labeled to treat for Crabgrass. Depending on what type of turf grass you have, we recommend to Drive for Crabgrass control.

    Was this answer helpful to you?   Yes No
    7 of 8 people found this answer helpful.
  • Asked by Brook from Paris Il
    05/15/2015
    Q
    Will Hi-Yield 2, 4-D Selective Weed Killer hurt big blue, switch, or indiangrass?
    A
    Hi-Yield 2, 4-D Selective Weed Killer effectively controls many annual weeds in established warm-season range grasses but can damage some of these grasses in the early seedling stage. We would recommend performing a spot treatment to test for tolerance.
    Was this answer helpful to you?   Yes No
    7 of 8 people found this answer helpful.
  • Asked by Barrett from Kentwood Louisiana
    04/09/2014
    Q
    To kill clover and dollar weed do I mix 4 oz. per 1 gallon of water
    A
    Correct, you want to mix 4 oz. Hi-Yield 2, 4-D Selective Weed Killer per 1 gallon of water to treat for clover and dollarweed.
    Was this answer helpful to you?   Yes No
    7 of 9 people found this answer helpful.
  • Asked by Victor from Loris, Sc
    03/05/2017
    Q
    When is best time to apply Hi-Yield 2, 4-D Selective Weed Killer?
    A

    Hi-Yield 2, 4-D Selective Weed Killer can be used anytime your weeds are actively growing.

    Was this answer helpful to you?   Yes No
    7 of 8 people found this answer helpful.
  • Asked by Ott from Katy, Tx
    02/22/2018
    Q
    Is Hi-Yield 2, 4-D Selective Weed Killer safe to use on Bermuda grass for spot treatment or broadcast?
    A

    Hi-Yield 2, 4-D Selective Weed Killer is safe to use on established Bermuda for broadleaf weeds.  It can be used as either a spot or broadcast treatment as directed on the product label.

    Was this answer helpful to you?   Yes No
    7 of 7 people found this answer helpful.
  • Asked by Michele from Augusta,ga
    04/24/2014
    Q
    can I use this product around my trees,where the bulk of wild onions are?
    My entire backyard has tree roots under soil. I want to plant grass but need to kill onions 1st. Need I say this is a shaded yard.
    A
    Hi-Yield 2, 4-D Selective Weed Killer can be applied to kill wild onions. You wan to make sure to apply when there is no wind to lessen the possibility of drift on the trees.
    Was this answer helpful to you?   Yes No
    7 of 8 people found this answer helpful.
  • Asked by Gloria from Mastic Beach, Ny
    03/10/2016
    Q
    Is Hi-Yield 2, 4-D Selective Weed Killer safe to use around dogs?
    A

    Hi-Yield 2, 4-D Selective Weed Killer is safe around dogs when used as directed on the product label.  Pets and people should be out of the area during treatment until dry, typically a few hours is best.

    Was this answer helpful to you?   Yes No
    7 of 8 people found this answer helpful.
  • Asked by Linda from West Branch Mi
    05/22/2015
    Q
    How soon after I spray my lawn with Hi-Yield 2, 4-D Selective Weed Killer can I cut it?
    A
    For best results, you should mow 1 to 2 days before application of Hi-Yield 2, 4-D Selective Weed Killer.
    Was this answer helpful to you?   Yes No
    7 of 18 people found this answer helpful.
  • Asked by David from Hampton, Ga
    04/08/2018
    Q
    Can fertilizer be mixed into 2,4-d solution for 1 step application?
    A

     

    You can apply a fertilizer at any time after applying Hi-Yield 2,4-D.  If the fertilizer needs to be watered in, you will need to wait 24 hours to allow the 2,4-D to fully dry before applying the fertilizer. 

     

    Was this answer helpful to you?   Yes No
    7 of 7 people found this answer helpful.
  • Asked by Ruth from Brunswick, Ga
    06/27/2017
    Q
    Can I spray weeds with 2,4-D right after it has rained before the grass is dry?
    A

    You can apply Hi-Yield 2, 4-D Selective Weed Killer to the grass directly after it has rained, however the product may not stick to the grass as well. If you add a surfactant you may get better results.  This product will still work, however it may not work as fast, or you may need to treat again.  For optimum results it is best to apply it once the grass has dried.

    Was this answer helpful to you?   Yes No
    7 of 7 people found this answer helpful.
  • Asked by Kathy from Whitehall
    05/04/2017
    Q
    How much Hi-Yield 2,4-D would I use in a 30-gallon sprayer?
    A

    The mixing ratios for Hi-Yield 2,4-D will vary according to where you are treating and what you are treating for. According to the product label: For spot treatment in non-crop areas: Use 1 pint in 3 gallons of water or 4 oz. in 3/4 gallon in a hand sprayer. In pastures and range land: Use 3 to 4 oz. in 1 to 3 gallons of water per 1,000 sq. ft. On Ornamental Turf: Use 16 oz. in 1 to 8 gallons of water per 2,725 sq. ft. or 2 gallons in 15 to 50 gallons per acre. Please review the product label for complete usage instructions.

    Was this answer helpful to you?   Yes No
    7 of 50 people found this answer helpful.
  • Asked by Roxan from Horseshoe Bend Idaho
    04/19/2017
    Q
    What is the mixture of Hi-Yield 2, 4-D Selective Weed Killer about for a 24 ounce spray bottle
    A

    You would want to dilute Hi-Yield 2, 4-D Selective Weed Killer down to approx. .8oz per 24oz of water.
     

    Was this answer helpful to you?   Yes No
    7 of 7 people found this answer helpful.
  • Asked by Barbara from Old Fort, Tn
    05/07/2016
    Q
    What is wetting agent or oil that you use in Hi-Yield 2,4-D Selective Weed Killer?
    A

    We would recommend using our Non-Ionic Surfactant product with Hi-Yield 2,4-D Selective Weed Killer. You will use 1 teaspoon per gallon of water. 

    Was this answer helpful to you?   Yes No
    7 of 7 people found this answer helpful.
Displaying 81 to 100 (of 326 questions)