Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide should be applied when you are not expecting any rainfall for at least 24 hours following the application (completely dried). You may reapply in 4 weeks from initial application on the lawn.
Yes, Hi Yield Indoor/Outdoor 10% Permethrin can be used for flea control. It is recommended to also use an IGR such as Archer in addition to your insecticide for complete control. Please take a look at our Flea Control Guide for more information.
Hi-Yield Indoor/Outdoor Broad Use Insecticide is safe to be used around dogs, and other household pets, as long as they are not in the area during application. They are safe to re-enter once the product has completely dried.
Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide is not an organic product but a synthetic pyrethyroid. It is safe to use on winter squash when used as directed on the product label.
How long it takes for Hi-Yield Indoor/Outdoor Insecticide to kill a bed bug depends on a number of factors, such as how long the bed bug spent in contact with a treated surface and what life cycle stage it is in. Keep in mind that, while this product is technically labeled for bedbugs, it is not typically recommended to treat this pest as there are other products which are much more effective. We normally recommend using one of our bed bug kits so that you will have everything necessary to completely eradicate a bed bug infestation. You may want to take a moment to look over our Bed Bug Guide for more information.
Per the product label for Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide: Mix 1 1/2 fl. ozs. in 1 gallon of water to treat one mound. Apply the solution as a gentle rain to each Fire ant mound using a sprinkler can. Thoroughly wet the mound and the surrounding area to a 4-foot diameter. For best results, apply in cool weather, 65°-80° F, or in early morning or late evening hours. Treat new mounds as they appear. Do not disturb the mound prior to treatment. Treat all mounds in the vicinity, and treat all colonies which have not yet constructed mounds. Do not use equipment that produces a pressurized spray since this will disturb Fire Ants and cause migration, reducing product effectiveness.
Per the Hi Yield Indoor/Outdoor Broad Use Insecticide Product Label: For Outdoor Perimeter treatments for bugs: Use at the rate of 6 2/3 fl. oz. per 1 gallon water to treat 1,600 linear feet with a 6-inch spray band.
For Indoor Use: For initial clean up of severe Insect infestation, dilute at a rate of 6.7 fluid ounces of this product to 1 gallon water of used. For normal infestations dilute 1 1/3 fluid ounces of this product to 1 gallon of water used.
The mixing rates for Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide will vary depending on where and what you are treating. Per the product label: For lawns, use 0.5 oz. per 3 gallons of water per 1,000 sq. ft., or for and for indoor/outdoor plants, trees, and shrubs, use 1 oz. per 4 gallons of water. Please refer to the label for complete application instructions.
We do not recommend mixing Hi-Yield Indoor/Outdoor 10% Permethrin with any other insecticides. You can however, mix a synergist like ExciteR Insecticide with any of the 3 products to get a quick knockdown effect.
Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide should be mixed at 1 oz. per gallon of water for yellow jackets.
Yes The Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide is safe to use around pets when used as directed on label, and keeping pets away from the treated areas until the product has completely dried.