Hi-Yield Triclopyr Ester can withstand rain 1 hour after application.
It can take about two weeks for Hi-Yield Triclopyr Ester to start to show burn down. You may need to make a 2nd application after four weeks.
Hi-Yield Triclopyr Ester is best applied to dry areas. Slightly damp is ok but you do not want to apply when grass/weeds are soaked.
Hi-Yield Turflon Ester Ultra is labeled to eradicate wild violets. Please refer to the product label for complete mixing and application instructions. You will mix 3/8 - 3/4 oz. per 1 gallon of water per 1,000 sq. ft. You can apply this product early spring through fall for the most effective results.
Hi-Yield Triclopyr Ester should be applied 2-3 days after mowing and you should not mow again for an additional 2-3 days after application.
Hi-Yield Triclopyr Ester should be mixed when you are ready to use the product. You should not store mixed product longer than 24 hrs.
Yes, a non-ionic surfactant can be added to Hi-Yield Turflon Ester Ultra when being applied to wild violets. The mixing ratio for the surfactant is 1-2 teaspoons per gallon of water. However, if you are treating in your lawn, do not use a surfactant as you could burn your lawn.
Hi-Yield Triclopyr Ester Ultra is pet safe if used as directed. Pets and people should be kept out of the area while the product is being applied. Once the treated area has fully dried, it is safe for everyone to return.
Hi-Yield Triclopyr Ester is labeled for ground ivy, also known as Creeping Charlie. You would use 3/8 - 3/4 oz. per 1 gallon of water per 1,000 sq. ft.
Per the Hi Yield Turflon Ester Product Label: Apply HI-YIELD® Turflon® Ester Ultra at a rate of 1 quart per acre. Three to four additional applications at 4 week intervals will be required to give adequate suppression of Bermudag- rass and allow Fescue or other desired turfgrass species to dominate. To improve suppres- sion and control of Bermudagrass, To improve suppression and control of Bermudagrass, tank mix 1 quart of HI-YIELD® Turflon® Ester Ultra per acre with a postemergence grass herbicide registered for this use pattern. Three to four additional applications of this tank mix at 4 week intervals should be made to achieve control. Reseeding following application will accelerate the transition to Cool Season turf.
This product only control weeds that have already emerged and that are actively growing. If your yard has started going dormant at all and your temps are not above 65 degrees at least 5 days in a row at this point in the year, then you need ot wait until next year to apply the product as you will only see spotty results now.
It is recommended that you wait at least three weeks after applying Hi-Yield Triclopyr Ester Ultra to reseed.
Hi-Yield Triclopyr Ester Ultra is best applied in temperatures below 90 to prevent burning of the turfgrass and better effectiveness against the targeted weeds.
Yes, Hi-Yield Triclopyr Ester is labeled for ground ivy, also known as creeping charlie. You would use 3/8 - 3/4 oz. per 1 gallon of water per 1,000 sq. ft.
Hi-Yield Turflon Ester Ultra can be used on tall Fescue to control Bermuda grass. Per the product label, the application rate is 3/4 fl. oz. of product per gallon of water. You will likely have to do multiple applications to gain full control of the Bermuda grass. Applications can be done every 3-4 weeks.
Dish soap could interfere with the chemical process and prevent herbicides from doing their job. Hi-Yield Triclopyr Ester Ultra is applied at 3/8 - 3/4 oz. (2.25-4.5 teaspoons) per gallon of water per 1,000 sq. ft. (8 - 16 oz. per acre). See label for complete application instructions. It is recommended to add a non-ionic surfactant for best results but is not required per label instructions.
If you will be applying a foliage spray during warm weather when weeds are actively growing, use 1 Tbsp. of Hi-Yield Turflon Ester per 1 gallon of water to treat 1,000 sq ft. For specific application instructions, please refer to the product label.
Pets should remain out of the treated area until the surfaces are completely dry. They should NOT be present during the application of Hi-Yield Triclopyr Ester Ultra.
After applying Hi-Yield Triclopyr Ester you must wait at least 3 weeks before overseeding or reseeding.
Hi-Yield Turflon Ester Ultra could affect nearby desirable plants if it were to contact them or the root system. We would not recommend applying this product at or near the dripline of any desirable plants.