Hi-Yield Triclopyr Ester is not labeled for cut stump applications. ? Remedy Ultra Herbicide is a similar product that is labeled for this use. Cut Stump: 20 to 30 gallons with oil to make 100 gallons and Spray the Root Collar area, Sides of the Stump, and the Outer Portion of the Cut Surface, until fully wet. .
Hi-Yield Triclopyr Ester is not labelled to treat for helleborine. There is an article here helps explains how to eliminate it.
Hi-Yield Triclopyr Ester is not labeled to control morning glory.
Allow the application of Hi-Yield Triclopyr Ester to completely dry before allowing children and pets onto the treated areas. Please view the product label for more information.
Martins Triclopyr 4 and Hi-Yield Triclopyr Ester are very similar products, they have the same active ingredient except Martin's has just a little higher percentage.
We recommended raking up and cleaning up any dead weeds from the application of Hi-Yield Triclopyr Ester prior to overseeding for best results.
You will need to wait atleast 3 weeks before overseeding or reseeding following the application of Hi-Yield Triclopyr Ester.
Please view the product label for more information.
Overapplying any herbicide including Hi-Yield Triclopyr Ester increases the risk of injuring/killing your turfgrass.
If you are concerned with possibly injuring after applying Hi-Yield Triclopyr Ester, we would suggest contacting the manufacturer for further recommendations for this situation at 855-270-4776.
Hi-Yield Triclopyr Ester can injure or kill flowers, shrubs, ornamentals or other desirable plants.
Hi-Yield Triclopyr Ester is not labeled as safe to apply over juniper.
Unfortunately, there is not an herbicide available that would remove the ground ivy from around juniper that would not also potentially harm it. The best thing for this area is to wear gloves and carefully hand pull the ivy or you can carefully spot treat with a glyphosate-based product such as Gly Pho-Sel Pro 41% with Surfactant, avoiding contact with as much of the juniper as you can.We would need to know what specific product of Ferti-lome you are wanting to mix together in order to advise if mixing the Hi-Yield Triclopyr Ester Ultra would be permitted. You may also check the product labels for "tank mixing" instructions on if and how the product is able to to mixed.
What area are you using the Prodiamine over? Hi-Yield Triclopyr Ester Ultra is not labeled to be used in all lawns types like the Prodiamine can be.
Hi-Yield Triclopyr Ester Ultra is not labeled for use on Centipede grass because it will harm it. Additionally, this product does not kill Bermuda, but rather only suppresses it.
Hi-Yield Turflon Ester Ultra can be used on perennial bluegrass, perennial ryegrass, or tall fescue, and on ornamental turf including these turfgrasses in golf courses to control Bermuda grass. Per the product label, the application rate is 3/4 fl. oz. of product per gallon of water. You will likely have to do multiple applications to gain full control of the Bermuda grass. Applications can be done every 3-4 weeks.
Hi-Yield Triclopyr Ester would be mixed at the rate of ½ to 1 pint per acre when tanked mixed. This equals ½ to 1 tsp per gallon if it takes you 100 gallons to cover the acre.
The application rate for Hi-Yield Triclopyr Ester will vary depending on where and what you will be treating. Please refer to the product label for specific application instructions.
Hi-Yield Triclopyr Ester is not labeled for cut stump applications. But Remedy Ultra Herbicide is a similar product that is labeled for this use. Cut Stump: 20 to 30 gallons with oil to make 100 gallons and Spray the Root Collar area, Sides of the Stump, and the Outer Portion of the Cut Surface, until fully wet. You will use basic safety supplies when applying Nitrile gloves, boots, and safety glasses.
Hi-Yield Triclopyr Ester and Metsulfuron 60 DF are applied to turfgrass only and are not labeled for removal of palmetto on plants.
Hi-Yield Triclopyr Ester is not safe for use on bermuda. It is actually used to control berrmuda in certain turf types.
Hi-Yield Triclopyr Ester is best applied to well established fescue. This is usually after it has been mowed at least twice. Be aware this product is not labeled to be used on residential lawns though.