Aaron from Little Rock, Ar writes
Dominion 2L Termiticide Concentrate is applied at one gallon every 10 sq ft. Some of our customers also use a 5 gallon bucket and pour the 5 gallons over 50 square foot sections which will be much faster than using a hand pump sprayer which comes out slowly. It is very important to apply more around the perimeter edges of the slab, around plumbing pipes that will come through the slab, and along expansion joints if you know where they will be. Since these are the more likely entry points of termites you want to make sure you treat more heavily around these areas. You should take general precautions when applying any product which would be to wear gloves, protect your eyes if it is windy, and treat only in the designated area where your slab will be poured. You will need at least 2- 27.5 fl oz bottles to treat 640 sq ft (64 gallons at one gallon every 10 sq ft).
Answer last updated on: 10/18/2017