Yehuda from New Jersey writes
I am having footing poured three feet down, and a block wall built on it up to ground (surface) level. At what point in the backfill do I stop the backhoe operator in order to pour in the Taurus solution? Also using a hand sprayer to wet down the top soil layer will not be practical, as this is far larger than a 6x6 trench. Can i use a garden hose sprayer?
For pre slab construction treatment using Taurus SC Termiticide, it is recommended to pre treat the soil prior to pouring concrete or footings in additon to doing a trench method treatment for termites. This is because you will never have the opportunity again to treat underneath slabs. For pre slab construction treatments including basements, patios, garages, porches and garage slabs, mix 0.8 fl oz of Taurus SC per gallon of water and for every 10 sq ft, pour 1 gallon of mixed solution. After the footings have been poured and all grade levels have been placed next to the block wall foundation, you will still need to dig the standard 6 inch x 6 inch trench directly against the foundation and pour 4 gallons of mixed solution every 10 linear feet. For homes where the foundation is at a depth greater than 4 ft, you would need do what’s called rodding to get the 4 gallons of solution down to the footing. Rodding is where you will use piece of rebar long enough that when driven down into the soil will reach just above the footing and for every 10-12 inches in the 6 in x 6 in trench, drive the rebar down into the soil just deep enough to reach the top of the footing. Pour the 4 galllons of mixed solution every 10 linear feet along the trench and allow the mixed solution to effectively reach down into the soil and provide the barrier protection. Please view the product label for more information.
Answer last updated on: 11/02/2021
