According to the manufacturer, it is not suggested to use the Martins Permethrin 10% on an EZ-Flo System. Please specify what type of insects you are targeting to better assist your needs.
Per the product label, you will dilute 2 ozs. of Martins Permethrin 10% in 1 gal. water to treat pests on large animals. Please see the label for specific application rates and instructions.
Martins Permethrin 10% is not labeled to be used in a fogger outdoors, nor is it labeled to be used for mosquitoes around homes. You may want to consider using a product like CSI 30-30 Mosquito, Fly & Gnat Control instead.
The general outdoor application rate for Martins Permethrin 10% is 1.5 oz. in 1 quart (32 oz.) of water, treating 400 linear feet with a 6-inch spray band around the building foundation to a height of 2 to 3 feet, where pests are active and may find entrance. However, you should refer to the product label for rates specific to your treatment and for complete application instructions.
Martins Permethrin 10% is not labeled for use on squash plants. Sevin Concentrate and it is safe for squash and labeled for squash bugs. You will apply 1.5 fl oz per gallon of water.
Yes, you can apply Martins Permethrin 10% to the lawn. Thoroughly wet down grass a few hours before applying. Home lawns should be no taller than 3 inches at time of application. Slightly more water may be used as long as the amount of product per area is as listed below. For heavy infestations, repeat application after 2 weeks. For ants, crickets and grasshoppers, use 1/2 fl. oz. in 3 gals. of water to cover 1,000 sq. ft. For other listed insects, use 1 1/2 fl. oz. in 10 gals. of water to cover 1,000 sq. ft.
When using the Martins Permethrin 10% for flea and tick control on dogs, you will typically mix 0.64 ounces per gallon of water. That would break down to roughly 0.16 ounces per quart (32 oz) of spray solution.
It is recommended to consult a veterinarian before using Martins Permethrin 10% on debilitated, aged, pregnant or nursing or animals on medication.