It is recommended to consult a veterinarian before using Martins Permethrin 10% on debilitated, aged, pregnant or nursing or animals on medication.
Per the Martins Permethrin 10% product label: Use 1 1/2 fl. oz. in 1 quart of water, treating 400 linear feet with a 6-inch spray band.
Use 1 1/2 fl. oz. of Martins Permethrin 10% in 1 quart of water per the product label for nuisance pests in outdoor areas.
Per the Martins Permethrin 10% product label: Use 1 1/2 fl. oz. in 1 quart of water, treating 400 linear feet with a 6-inch spray band.
You will use 8 fl. oz. of Martins Permethrin 10% per 12.5 gallons of water for dipping for fleas. It can be applied every 3 weeks as needed.
We recommend bathing the dog first and then applying Martins Permethrin 10%. You will use 8 fl. oz. per 12.5 gallons of water for dipping for fleas.
Martins IGR (Nylar 1.3%) is NOT labeled to be used on pets.
You will use 8 fl. oz. of Martins Permethrin 10% per 12.5 gallons of water for dipping for fleas.
You will use 8 fl oz. of Permethrin 10% in 12.5 gals. of water. Thoroughly wet the animal by dipping, sponging or spraying. Allow animal to dry in a warm place without rinsing or toweling. Do not reapply product for two to three weeks. Consult a veterinarian before using this product on debilitated, aged, pregnant or nursing animals on medication.
When using the Martins Permethrin 10% on goats for lice, you would dilute 8 fl oz in 50 gallons of water. Spray to thoroughly cover the entire animal. For lice a second treatment is recommended 14-21 days later per the product label.
Yes, Martins Permethrin 10% is labeled to treat for chich bugs. Per the product label you would thoroughly wet down grassa few hours before applying. Home lawns should be no taller than 3 inches at time of application. Slightly more water may be used as long as the amount of product per area is as listed below. For heavy infestations, repeat application after 2 weeks. You would use 1.5 fl ozs in 10 gallons of water to cover 1000 sq ft.