Per the product label, thoroughly wet down grass a few hours prior to applying Martins Permethrin 10%. Home lawns should be not more than 3 inches tall at the time of application. For ants, crickets, and grasshoppers use 1/2 oz per 3 gallons of water to cover 1,000 sq ft. For other listed insects like ticks, use 1.5 oz in 10 gallons of water to cover 1,000 sq ft. For heavy infestations repeat application in 2 weeks. Martins Permethrin 10% controls horn flies, face flies, lice and ticks, with a residual activity lasting up to 28 days.
Although Martins Permethrin 10% is a livestock and premise spray, it should not be applied to grazing areas.
We apologize but the Martins Permethrin 10% is not labeled to be used on any type of furniture, or bedding.
We apologize, but Martins Permethrin 10% is not labeled for this use so we are unable to provide application information. You may want to look over our Tick Control Guide for more information on effective products and treatment methods.
The other ingredients in the Martins Permethrin 10% are the inert ingredients, which the manufacturer is not required to disclose. You may want to contact the manufacturer, Control Solutions, directly, at 1-800-242-5562.
Martins Permethrin 10% is not labeled for carpet beetles. You can find our selection of products for carpet beetles here. You may also want to look over our Carpet Beetle Pest Control Guide for more information.
Martins Permethrin 10% would be mixed with water only and applied at the following rates and instructions on cattle:
Dilute 8 ozs. in 50 gals. water
Dilute 1 pt in 100 gals. water
Dilute 1 qt. in 200 gals. water
Dilute 2 ozs. in 1 gal. water
Dilute 1 pt. in 8 gals. water
Spray to thoroughly cover entire animal. For lice or mites a second treatment is recommended 14-21 days later. Spray lactating dairy cows only after milking is completed. SPOT TREATMENT - LOW PRESSURE SPRAY Apply 1/2 oz. per ear or 2-4 oz. on face or 12-16 oz. along the backline.
The manufacturer recommends that you do not apply Martins Permethrin 10% to pigs until they are 12 weeks old at the following rates:
Dilute 8 ozs. in 25 gals. of water
Dilute 1 pt. in 50 gals. of water
Dilute 1 qt. in 100 gals. of water
Spray, dip or sponge to apply 1 pint per pig, especially around ears. Please refer to the product Label for complete application instructions.
When applying Martins Permethrin 10%, pets will need to be kept out of the area during application and until dry, usually a couple of hours.
We recommend consulting your vet before using Martins Permethrin 10% on very young animals.
Martins Permethrin 10% should not be applied to patio furniture for mosquitoes. Spray outside surfaces of screens, doors, window frames, and treat surfaces around light fixtures on porches, in garages, around shrubbery, and other places where these insects alight or congregate.
No, Martins Permethrin 10% is not labeled for use where animals would graze. The only insecticide we carry that can be used in grazing areas is the all natural Essentria All Purpose.
Martins Permethrin 10% can be used on dogs.
Per product label:
Dilute 8 ozs. in 12.5 gals. of water
Thoroughly wet the animal by dipping, sponging or spraying.
Allow animal to dry in a warm place without rinsing or
toweling. Do not reapply product for two to three weeks.
Consult a veterinarian before using this product on
debilitated, aged, pregnant or nursing animals on medication.
Martins Permethrin 10% may be used to treat dogs over 12 weeks of age for fleas, ticks, mange, and lice (do NOT apply permethrin products on cats). Per the product label, you should mix 8 oz. in 12.5 gallons of water, which would break down to 0.64 ounces per 1 gallon of water.
"Thoroughly wet the animal by dipping, sponging or spraying. Allow animal to dry in a warm place without rinsing or toweling. Do not reapply product for two to three weeks. Consult a veterinarian before using this product ondebilitated, aged, pregnant or nursing animals on medication."
Martins Permethrin 10% can be applied to dogs.
Per the product label:
Dilute 8 ozs. in 12.5 gals. of water
Thoroughly wet the animal by dipping, sponging or spraying.
Allow animal to dry in a warm place without rinsing or
toweling. Do not reapply product for two to three weeks.
Consult a veterinarian before using this product on
debilitated, aged, pregnant or nursing animals on medication.
Thoroughly wet down grass a few hours before applying. Home lawns should be no taller than 3 inches at time of application. Slightly more water may be used as long as the amount of product per area is as listed below. For heavy infestations, repeat application after 2 weeks.1 1/2 fl. ozs of Martins Permethrin 10% is mixed in 10 gals. of water to cover 1,000 sq. ft.
Martins Permethrin 10% is labeled for use on dogs. Per the product label: Dilute 8 ozs. in 12.5 gals. of water. Thoroughly wet the animal by dipping, sponging or spraying. Allow animal to dry in a warm place without rinsing or toweling. Do not reapply product for two to three weeks. Consult a veterinarian before using this product on debilitated, aged, pregnant or nursing animals on medication.
Martin's Permethrin 10% is not labeled for application to anything edible. You may be able to use something like Hi-Yield Indoor/Outdoor 10% Permethrin instead. Please consult the product label to make sure that the insect(s) you are targeting and the specific edibles you will be applying to are listed. You can see our full selection of products for edibles here.
Yes, Martins Permethrin 10% can be applied indoors to cracks and crevices, baseboards and infested areas. You are also able to apply this product to dogs.
Per the product label:
Dilute 8 ozs. in 12.5 gals. of water
Thoroughly wet the animal by dipping, sponging or spraying.
Allow the animal to dry in a warm place without rinsing or
toweling. Do not reapply product for two to three weeks.
Consult a veterinarian before using this product on
debilitated, aged, pregnant or nursing animals on medication.
This product is not labeled for use on cats, but it also will not harm cats if they are kept out of the treated area until the area has dried completely.
Martin's Permethrin 10% is labeled for certain types of mites on animals. We would recommend contacting your vet for advice on identifying the specific mite you are treating for. It can be to the following listed areas:
Indoor and Outdoor: Lawns, Shrubs, Cattle Barns, Swine Houses, Milk Rooms, Kennels, Poultry Houses, Horse Barns, Dairies, Milking Parlors, Feed Lots, Stables and others
Homes, Beverage Plants, Canneries, Flour Mills, Food Processing Plants, Granaries, Hospitals, Hotels, Kennels, Meat Packing Plants, Office Buildings, Restaurants, Schools, Supermarkets, Warehouses and others
Use on Large Animals: Cattle, including lactating Dairy Cows, Horses, Swine, Poultry, Sheep and Dogs
Martins Permethrin 10% is not labeled to treat scabies. Scabies mites live only on/in the skin and we do not carry anything to treat humans. We suggest visiting your doctor to receive the medication needed to get rid of scabies.
