The inert ingredients in products like Martins Permethrin 10% are proprietary to the manufacturer and are not required by law to be listed on the product label. Only active ingredients will be listed. Please let us know if we can further assist you.
The dilution rate of Martins Permethrin 10% is 2oz per gallon water. So for a four gallon mix it would be 6-8oz per 4 gallons.
Yes, Martins Permethrin 10% is safe if used as directed on the product label. People and pets need to be kept out of the area during application but it is perfectly fine for them to return once all surfaces have completely dried.
Per the product label for Martins Permethrin 10%: On dogs, do not reapply product for two to three weeks. For spraying horses for lice or mites second treatment is recommended 14- 21 days later.
Per the Martins Permethrin 10% product label: Use 1 1/2 fl. oz. in 1 quart of water, treating 400 linear feet with a 6-inch spray band.
Martins Permethrin 10% is not labeled to treat either scabies or bed bugs. Scabies mites live only on/in the skin and we do not carry anything to treat humans. Most folks need to visit their doctor to receive the medication needed to get rid of scabies. You may spray your furniture with a product such as Steri-fab to kill anything on furniture though treating the home for scabies is usually not necessary. If you need to treat for bed bugs we would recommend using one of our bed bug kits to ensure that you have all of the products necessary for a thorough treatment. Before beginning any treatment, we would recommend that you get a proper identification of the pest you are dealing with, if you have not already done so, so that you can be sure you are using the right product(s) for your needs. You can do this by contacting either a pest control company or the local cooperative extension office in your area.
According to the manufacturer, it is not suggested to use the Martins Permethrin 10% on an EZ-Flo System. Please specify what type of insects you are targeting to better assist your needs.
Martins Permethrin 10% is not labeled to be applied on strawberries. Please provide the name of the targeted pest so that we can select a product that will fit your needs.
Martins Permethrin 10% is labeled to be applied at 8 oz/12.5 gallons of water, 16 oz/20 gallons of water, 32 oz/50 gallons of water for poultry mites. You will spray 1/2 oz per bird or 1 gallon per 100 birds with a fine mist. Spray roosts, walls and nests/cages.
Martins Permethrin 10% is safe on dogs when used as directed on the product label and it should not affect their central nervous system.
When using the Martins Permethrin 10% for flea and tick control on dogs, you will typically mix 0.64 ounces per gallon of water. That would break down to roughly 0.16 ounces per quart (32 oz) of spray solution.
Martins Permethrin 10% is labeled for both indoor and outdoor use. Any food should be removed or covered (including food prep surfaces) prior to application of the product. You should not treat on or near anything edible. Please refer to the product label for complete mixing and application instructions around food handling areas.
Martins Permethrin 10% or Bifen IT could be mixed with Exponent in a mister. Bifen IT is actually the more popular product because it is known for being super gentle on plants. The key is to apply to the underside of leaves where the adults lay during the day.
Martins Permethrin 10% is labeled to be used on horses for ticks. The rates are as follows and can also be found on the product label
Dilute 8 ozs. in 50 gals. water
Dilute 1 pt in 100 gals. water
Dilute 1 qt. in 200 gals. water
Dilute 2 ozs. in 1 gal. water
Dilute 1 pt. in 8 gals. water
After spray Martins Permethrin 10%, we would advise keeping out of the treated area for at least 1-2 hours after applying to let the area dry and settle before re-entering.
To treat for fleas indoors, you would mix the Martins Permethrin 10% at the rate of 1.33 oz per gallon of water per 1000 sq. ft., and the Precor IGR at the rate of 1 oz per gallon of water. Both concentrates can be mixed together in the same gallon of water. Pets and people (other than the person making the application) do need to stay out of the area while the products are being applied and until everything is fully dry. It would be a good idea for you to look over our article on How To Get Rid of Fleas if you have a moment. If you need to treat for several months, then we would recommend rotating the Permethrin with another product such as Conquer Insecticide, since cats can be sensitive to the active ingredient Permethrin.
Martins Permethrin 10% is not labeled to be used for head lice nor can it be used on the human body in any way or form. You should consult with a pharmacist or medical doctor for lice shampoo.
Martin's Permethrin 10% is not labeled for mites on dogs or humans and cannot be recommended or used for this issue. We would recommend contacting your vet and doctor for advice on treating this type of mite. We do not carry anything for people infesting parasites/mites.
Martins Permethrin 10% may be used to treat dogs over 12 weeks of age for fleas, ticks, mange, and lice (do NOT apply permethrin products on cats). Per the product label, you should mix 8 oz. in 12.5 gallons of water, which would break down to 0.64 ounces per 1 gallon of water.
"Thoroughly wet the animal by dipping, sponging or spraying. Allow animal to dry in a warm place without rinsing or toweling. Do not reapply product for two to three weeks. Consult a veterinarian before using this product on debilitated, aged, pregnant or nursing animals on medication."
You can browse all of our Dog Flea Products here.
Martins Permethrin 10% is mixed at 1.33 fl oz per gallon of water (2.66 TBSP) per 1,000 sq ft for treating indoor pests. Please refer to the label for more details on mixing for outdoor areas also. Your cat should not be present during the application and while the surfaces are wet. Once the water has dissipated and dried, your cat could return. This should only take a couple of hours.
