There is no withdrawal period is specified on the Martins Permethrin 10% product label.
Martins Permethrin 10% is not labeled for use on squash plants. Sevin Concentrate and it is safe for squash and labeled for squash bugs. You will apply 1.5 fl oz per gallon of water.
Martins Permethrin 10% is water-based.
Mixed Martins Permethrin 10% solution can be disposed of by pouring it out right up against the foundation of your home or other structure.
Martins Permethrin 10% should mix clear with water.
Martins Permethrin 10% is not labeled to be used for head lice nor can it be used on the human body in any way or form. You should consult with a pharmacist or medical doctor for lice shampoo.
Martins Permethrin 10% is not labeled to used on clothing.
Martins Permethrin 10% can be applied every 3 weeks as needed.
Yes, you can apply Martins Permethrin 10% to the lawn. Thoroughly wet down grass a few hours before applying. Home lawns should be no taller than 3 inches at time of application. Slightly more water may be used as long as the amount of product per area is as listed below. For heavy infestations, repeat application after 2 weeks. For ants, crickets and grasshoppers, use 1/2 fl. oz. in 3 gals. of water to cover 1,000 sq. ft. For other listed insects, use 1 1/2 fl. oz. in 10 gals. of water to cover 1,000 sq. ft.
Yes, The Martins Permethrin 10% may be used indoors and outdoors for flea control, but you may need additional products with it. We also suggest you look at our Indoor/Outdoor Flea Kit for a continuous treatment.This kit contains both adulticides and Insect Growth Regulators (IGRs) to provide quick knockdown of adult pests and to prevent the development of immature stages of ticks and fleas. The indoor products, NyGuard Plus and CimeXa dust, are ready to use, while the Temprid SC and Archer IGR are concentrates that will be diluted with water and applied with a pump sprayer.
Martins Permethrin 10% should not be applied to clothing as it is not labeled for this application.
Martins Permethrin 10% is not labeled to be applied to indoor plants. You could use Talstar for indoor plants. Mix at .5oz per gallon water.
You can apply Martins Permethrin 10% on horses as a spray or spot treatment (not as a pour-on) for listed insects, per page 21 of the product label. You would dilute 8 oz. in 50 gallons of water, 16 oz. in 100 gallons of water, or 1 qt. in 200 gallons when used as a spray. For use as a spot treatment for hornflies, faceflies, stableflies, or ear ticks, dilute 2 oz. in 1 gallon of water or 1 pint in 8 gallons of water. Then apply as a low pressure spray using 0.5 oz. per ear or 2-4 oz. on face or 12-16 oz. along the backline.
Martins Permethrin 10% is effective once it's mixed with water, remember that water is the carrier that allows the product to be applied evenly. Just as with other insecticides, the product must be used within 24 hours of being diluted otherwise the effectiveness does decrease. According to the label, to create a .10% solution, you will need to mix 1.33 ounces per gallon of water or for a pint of solution that will equal about 0.16 oz per 16 oz of water. According to the label though, if you're doing a dog dip you will need to use at least 8 ounces in 12.5 gallons of water, please read over the label for more information and treatment dilutions. Also, we do recommend to see your pets veterinerian for treatment.
Per the product label, you will dilute 2 ozs. of Martins Permethrin 10% in 1 gal. water to treat pests on large animals. Please see the label for specific application rates and instructions.
People and pets need to be kept out of the area while Martins Permethrin 10% is being applied and until it has dried. Once it has dried, it is safe for everyone to return to the area.