Per the product label, you will dilute 2 ozs. of Martins Permethrin 10% in 1 gal. water to treat pests on large animals. Please see the label for specific application rates and instructions.
People and pets need to be kept out of the area while Martins Permethrin 10% is being applied and until it has dried. Once it has dried, it is safe for everyone to return to the area.
You should not store mixed Martins Permethrin 10% or any other insecticide concentrate for longer that 24 hours in a sprayer. Concentrated insecticides will begin to separate which will clog the lines as well as destroy the seals in the sprayer. We recommend mixing a gallon at a time and discarding left over solution.
The inert ingredients in products like Martins Permethrin 10% are proprietary to the manufacturer and are not required by law to be listed on the product label. Only active ingredients will be listed. Please let us know if we can further assist you.
Martin's Permethrin 10% cannot be applied to anything edible. You may be able to use something like Hi-Yield Indoor/Outdoor 10% Permethrin instead. Please consult the product label to make sure that the insect(s) you are targeting and the specific edibles you will be applying to are listed. You can see our full selection of products for edibles here.
Martins Permethrin 10% is not labeled to be painted onto tree trunks. You can dilute this product at a rate of 6 oz per gallon of water with a hand-pump or backpack sprayer and then spray around the perimeter of your home to control elm seed bugs. This article from your Colorado Extension has great information about this pest and its life cycle. They suggest treating around your home for the best defense against this pest since the trees will already have populations too established for you to control with insecticides.
When using Martins Permethrin 10% can be used on dogs at the following usage rate: Dilute 8 ozs in 12.5 gallons of water; Thoroughly wet the animal by dipping, sponging, or spraying. Allow animal to dry in a warn place without rinsing or toweling. Do Not reapply product for two or three weeks. Consult a veterinarian before using this product on debilitaed, aged, pregnant, or nursing animals on medication.
Martins Permethrin 10% is not labeled to treat either scabies or bed bugs. Scabies mites live only on/in the skin and we do not carry anything to treat humans. Most folks need to visit their doctor to receive the medication needed to get rid of scabies. You may spray your furniture with a product such as Steri-fab to kill anything on furniture though treating the home for scabies is usually not necessary. If you need to treat for bed bugs we would recommend using one of our bed bug kits to ensure that you have all of the products necessary for a thorough treatment. Before beginning any treatment, we would recommend that you get a proper identification of the pest you are dealing with, if you have not already done so, so that you can be sure you are using the right product(s) for your needs. You can do this by contacting either a pest control company or the local cooperative extension office in your area.
Per the Martins Permethrin 10% product label: Use 1 1/2 fl. oz. in 1 quart of water, treating 400 linear feet with a 6-inch spray band.
We would recommend contacting your vet to appropriately diagnose what the issue is on the piglets before applying anything such as Martins Permethrin 10%. The product is labeled for applying to swine when used as directed but you should be sure that you are treating correctly for the exact issue.
Martin's Permethrin 10% is not labeled to be applied to edible gardens. The Captain Jacks Deadbug Brew states that for potato bugs you can reapply every 7 days as needed or until the bugs are gone.
Martins Permethrin 10% is safe to apply to adult livestock per the product label instructions. "For a pig, you would mix 8 oz to 25 gallons of water and apply a pint per pig (sponged on avoiding ears) for listed insect control". Please contact Control Solutions for further assistance on a feral piglet at 281-892-2500.
When using Martins Permethrin 10% for treating cattle you will need to dulite 8 ounces of the product in 50 gallons of water and apply to cattle by spraying them with the mixed solution thouroughly covering the entire animal. A second treatment can be made after 14-21 days from the first application. Also refer to the product labeling before making any application.
Martins Permethrin 10% does not contain petroleum. It cannot be used on clothes.
Martins Permethrin 10% should not be applied to cats. This product is extremely toxic to them. For dogs, Martins Permethrin 10% can be reapplied every 2-3 weeks. It is recommended that you wet the ground before applying the product to increase the effectiveness.
Per the Martins Permethrin 10% product label: Use 1 1/2 fl. oz. in 1 quart of water, treating 400 linear feet with a 6-inch spray band.
Martins Permethrin 10% will not harm cats if they are kept out of the treated area during application and until everything is thoroughly dry. Please refer to the product label for complete application instructions.
Yes! Martins Permethrin 10% would be mixed with water only and applied at the following rates and instructions on cattle:
Dilute 8 ozs. in 50 gals. water
Dilute 1 pt in 100 gals. water
Dilute 1 qt. in 200 gals. water
Dilute 2 ozs. in 1 gal. water
Dilute 1 pt. in 8 gals. water
Spray to thoroughly cover entire animal. For lice or mites, a second treatment is recommended 14-21 days later. Spray lactating dairy cows only after milking is completed. SPOT TREATMENT - LOW-PRESSURE SPRAY Apply 1/2 oz. per ear or 2-4 oz. on the face or 12-16 oz. along the backline.