Martins Permethrin 10% cannot be applied to couches and beds/bedding. It is NOT labeled for bedbugs. Please look at our Bed Bug Kits for all the necessary products to do a full treatment for bed bugs. It is recommended after you see evidence bed bugs are in your home that you treat completely to prevent further infestations. Bed Bugs can lay go up to 18 months without eating making it very likely for them to reappear. To treat your couch alone, we would recommend using Sterifab on the surfaces and Bedlam Aerosol spray in the tufts and folds of the couch and underside of the cushions.
Please look at some of our Bed Bug Control Articles here.
Martins Permethrin 10% is not labeled to treat for dust mites. Steri-Fab Insecticide can be applied directly to mattresses for Dust Mites. You can treat the entire mattress.
When applying Martins Permethrin 10% indoors, you will use 1.33 oz. per gallon of water. You can reapply in 2 weeks for heavy infestations or once a month for prevention. We also recommend treating outdoors as well. Please see our Tick Treatment Guide for more tips and information.
Martins Permethrin 10% is not waterproof but can stay on dogs for a short time after application. You can reapply 2 to 3 weeks after first application per the product label.
When treating for fleas, you will need to apply Martins Permethrin 10% (or any other product you are using) at 14-day intervals, being sure to vacuum once a day between applications. You will likely need to make at least 2 applications. It would be a good idea to take a look at our Flea Control Guide for more tips and information on how to do a complete treatment.
While you can use Martins Permethrin 10% as a tick dip on pets, we would recommend contacting your vet for advice on the best treatment if the pet is heavily infested.
Martins Permethrin 10% can be applied once every 28 days outdoors to listed areas.
Martins Permethrin 10% is not labeled to be used in pastures that are grazed or used for hay. It can be used in swine homes and pigs can return to the area once dry. Typically a few hours is best.
Martins Permethrin 10% is mixed at 8 oz per 50 gallons of water to apply for ticks on horses. Please refer to page 21 for complete instructions.
No, Martins Permethrin 10% should not be mixed with any other insecticides. This has the potential to decrease the effectiveness of the products and cause the adverse affect.
Martins Permethrin 10% cannot be mixed with any type of cream and cannot be used on the skin. Please consult your doctor for further assistance.
Martins Permethrin 10% is not labeled for usage on clothing. It is not a legal or a safe application and should not be applied to any other surface other than what is listed on the product label.
Per the product label, thoroughly wet down grass a few hours prior to applying Martins Permethrin 10%. Home lawns should be not more than 3 inches tall at the time of application. For ants, crickets, and grasshoppers use 1/2 oz per 3 gallons of water to cover 1,000 sq ft. For other listed insects like ticks, use 1.5 oz in 10 gallons of water to cover 1,000 sq ft. For heavy infestations repeat application in 2 weeks. So you would need about 22 oz to treat 1 Acre.
You would need to reapply Martins Permethrin 10% after bathing your dog. Per the product Label , Martins Permethrin 10% can be applied every 3 weeks as needed.Discontinue use and wash your pet with mild soap and plenty of water if your pet shows any signs of sensitivity to this product.
We have heard of people making tick tubes but unfortunately, using the permethrin in that way is off label and I wouldn't be able to break that down to advise you on how much to use. The best recommendation I can give you is to treat the yard, bushes, shrubs, and foundation of the house with a product labeled for tick control.
For yard treatments, Talstar XTRA Granules is a great product for tick control. It is a granule that is effecitive for 2-3 months after it is watered in, provides a quick knockdow and labeld for many insects. For areas around the home, wooded tree lines, landscape beds, etc. We would recommend ing the liquid version Talstar P to spray inside the shrubs, undersides of the leaves, under overhangs of roofs, patios, or covers. Talstar P lasts 30 days outdoors.
Martins Permethrin 10% should not harm birds if applied according to the instructions on the product label. The dilution rate is 2 oz. per gallon of water.
You will use 8 fl. oz. of Martins Permethrin 10% per 12.5 gallons of water for dipping for fleas. It can be applied every 3 weeks as needed.
Martins Permethrin 10% is labeled for flies and roaches. It is mixed at 1 1/2 oz. in 1 quart of water.
Martins Permethrin 10% is safe to apply to adult livestock per the product label instructions. "For a pig, you would mix 8 oz to 25 gallons of water and apply a pint per pig (sponged on avoiding ears) for listed insect control". Thoroughly wet the animal by dipping, sponging or spraying.Allow animal to dry in a warm place without rinsing or toweling Do not reapply product for two to three weeks. Consult a veterinarian before using this product on debilitated, aged, pregnant or nursing animals. Please contact Control Solutions for further assistance on a feral piglet at 281-892-2500.
Martins Permethrin 10% is pet safe once dry. Be sure to follow the instructions on the product label.
