Yes, it is recommended to use a pump sprayer or backpack sprayer to apply Martins Viper Insecticide Concentrate.
Martins Viper Insecticide Concentrate contains cypermethrin as the active ingredient, which is a powerful pyrethroid. This active ingredient will kill the ants that you spray directly with it, as well as ants that contact the treated area after it's dry. Viper will NOT work slowly enough to be carried throughout an ant colony; it attacks the central nervous system of the insects and works relatively quickly. For a non-repellent (slow-kill) application for ants, we would recommend Arilon Insecticide (for use both inside and outside), or Taurus SC (outdoors only).
Martins Viper Insecticide Concentrate should not be applied to the uniform or any other clothing.
Martins Viper Insecticide Concentrate is safe when used as directed. It should only be applied to cracks and crevices and birds should be removed from the treated area for several hours after application to ensure no harm.
Martins Viper Insecticide Concentrate is not labeled for dust mites. We would suggest using a product like Bedlam Insecticide in labeled areas for residual control, and a product like Sterifab in areas where you want a contact kill on any surface and in areas you can't spray Bedlam.
The mix rate for Martins Viper Insecticide Concentrate is 0.5 - 1.0 fl oz per gallon of water depending on the pest you are treating. Please refer to the product label for instructions.
Martins Viper Insecticide is not labeled for bed bugs. We normally recommend using one of our bed bug kits, as it usually requires using more than one kind of product to completely eradicate them. You may want to look over our Bed Bug Guide for more information as well as helpful tips and videos.
Martins Viper Insecticide is labeled for spiders, however it does not specifically name black widow spiders. If you’re looking for a product that’s label specifies black widows, Bifen IT lists black widows, brown recluse and hobo spiders specifically.
Martins Viper Insecticide is not labeled for poultry mites, nor is it safe for use directly on animals. However, Martins Permethrin 10% is labeled to be applied at 8 oz/12.5 gallons of water, 16 oz/20 gallons of water, 32 oz/50 gallons of water for poultry mites. You will spray 1/2 oz per bird or 1 gallon per 100 birds with a fine mist. Spray roosts, walls and nests/cages.
Martins Viper Insecticide should dry clear when used as directed on the product label. That being said it does contain petroleum distillates so can leave an oily sheen behind. For mud daubers it is best to apply to surfaces where they nest and contact. If you are able to see a hole where they come and go from it would be best to treat with a dust such as Tempo 1% which would be easier for them to pick up.
A small unused amount of Martins Viper Insecticide can be poured out right along the foundation of the structure you are treating. If you have a large amount of unused product or old product, we recommend that you contact your local city or county sanitation department for proper disposal instructions in your area as they can vary.
Adding ExciteR to Martins Viper Insecticide only gives you a faster initial knockdow during application on those insects you spray directly. The Viper is what will leave the residual to continue to kill those that contact a treated area.
Yes, Martins Viper Insecticide can be mixed with Martins I.G Regulator.
Martins Viper Insecticide is not recommended for termite control. Please take a moment to review our articles on “How to Get Rid of Drywood Termites” and “How to Get Rid of Subterranean Termites” for more information on termite control.
The mix rate of Martins Viper Insecticide is 1/2 - 1 oz. per gallon of water. You may mix the 1/2 oz of the product with 1 gallon of water in a 1 gallon hand pump sprayer to make your application. Be sure to agitate the sprayer to mix the product. Also, please be sure to review the product label for more information and complete application instructions.
You will take the cap off the small measuring reservoir side of Martins Viper Insecticide and gently squeeze the bottle. The product will go up the small tube on the side and fill the reservoir.
How long Martins Viper Insecticide Concentrate takes to dry can vary depending on factors like how heavily it was applied and the humidity level in the area. In general, it will take a couple of hours to dry completely outside and about an hour inside.
Martins Viper Insecticide Concentrate is labeled for use on various insects, including but not limited to earwigs, beetles, carpenter ants, etc. This can be used in your flower bed but cannot be used on any type of edibles. This can be used indoors and outdoors. Be sure to keep pets and children out of the area while applying the product. Once it has dried completely, it is safe for them to return to the area.
As long as the application area of Martins Viper Insecticide Concentrate was dry it will be safe. The small amount of active ingredient left on the grass after the product has dried is only enough to harm insects when applied as directed on the product label.
Martins Viper Insecticide Concentrate is not labeled to treat for ringworm.
