Yes, you could potentially use MSM Turf Herbicide for bahiagrass control in Bermuda. You can use 0.25 – 0.75 oz per acre, and a repeat application may be required in 4-6 weeks. There may be some chlorosis of the Bermuda after application.
Yes, MSM Turf Herbicide is labeled for use on spurge and would be safe to use on bermuda grass.
Yes, you can apply MSM during dormancy or after complete green-up of the Bermuda lawn in the spring. You don’t want to apply any weed controls to the lawn during spring green-up since this is when the grass is in its most fragile state.
We would recommend using MSM Turf Herbicide to kill the Bahiagrass growing in your centipede lawn. You can use 0.25 – 0.75 oz per acre, and a repeat application may be required in 4-6 weeks. There may be some chlorosis of the centipede after application. Per the manufacturer, their recommended rate to use for spot applications is of 0.1 oz per 4 gallons of water, which can be easily measured with their measuring device provided.
We do not recommend applying Quali-Pro MSM Turf Herbicide in a hose end applicator. It should be applied per the product label instructions using a pump sprayer to ensure the best accuracy.
Yes, you can use Quali-Pro MSM Turf Herbicide on Floratam St. Augustine grass. Be sure read and follow the label instructions.
If you are trying to kill bahiagrass, then we recommend you treat it when the grass is in transition or actively growing for best results using MSM Turf Herbicide. If it is competely dormant, then it will not be able to absorb the herbicide.
We recommend that you consult with the MSM Turf Herbicide manufacturer directly for further assistance. Quali-Pro can be reached at (800) 242-5562.
MSM Turf Herbicide is a post emergent herbicide only.
Quali-Pro MSM Turf Herbicide can be safely used on Centipede lawns without causing harm.
MSM Turf Herbicide can be used in fine fescue. It will injure tall fescue.
Per the MSM Turf Herbicide product label on Fescue: This product may temporarily stunt tall fescue, cause it to turn yellow, or cause seedhead suppression.
To minimize these symptoms, take the following precautions:
• Do not use more than 4/10 ounce of MSM Turf Herbicide per acre • Use a tank mix with 2,4-D
• Use the lowest specified rate for the target weeds
• Use a non-ionic surfactant at 1/2 to 1 pint per 100 gallons of spray solution
• Make application later in the spring after the new growth is 5 to 6 inches tall, or in the fall
• Do not use a surfactant if liquid nitrogen is used as a carrier
• Do not use a spray adjuvant unless it is a non-ionic surfactant
MSM Turf Herbicide is labeled for use on both Bermudagrass and St Augustine to control Bahia as directed on the product label. You can broadcast at the rate of 0.25 TO 0.75 oz per acre with a repeat application 4-6 weeks later.
According to the product label, after making an application of MSM Turf Herbicide, you should wait 8 weeks to overseed.
The usage rates for Quali-Pro MSM Turf Herbicide will vary depending on whether you will be spot treating or broadcast spraying, and how much area you need to cover with your 50 gallons. Per the label, for selective control of Bahiagrass you will need to use 0.25 to 0.75 oz of Quali-Pro MSM Turf Herbicide per Acre. A repeat application may be required in 4 to 6 weeks.
MSM Turf Herbicide has no grazing restrictions listed on the label.
Per the product label: To maintain flexibility in crop rotation plans, do not treat your entire pasture, rangeland or CRP acreage with this product at the same time.We would recommend they be out of the area during treatment until dry, typically 4-6 hours just to be safe.
Per the manufacturer, the recommended rate of MSM Turf Herbicide to use for spot applications is 0.1 oz per 4 gallons of water, which can be easily measured with their measuring device provided.
The 8 oz bottle of MSM Turf Herbicide will mix with roughly 800 gallons of water total. This breaks down to approx 0.005 to 0.01 oz per 1 gallon of water.
To MSM turf herbicide you will need to know your spray rate, or how much water you are applying to each 1,000 sq.ft. or lawn Mark off an area of 1,000 sq.ft. and spray water over this area to determine your spray rate. Once you know your spray rate, you will apply 0.2 to 0.6 grams per 1,000 sq.ft.
Per the MSM Turf Herbicide product label on Fescue: This product may temporarily stunt tall fescue, cause it to turn yellow, or cause seedhead suppression.
To minimize these symptoms, take the following precautions:
• Do not use more than 4/10 ounce of MSM Turf Herbicide per acre • Use a tank mix with 2,4-D
• Use the lowest specified rate for the target weeds
• Use a non-ionic surfactant at 1/2 to 1 pint per 100 gallons of spray solution
• Make application later in the spring after the new growth is 5 to 6 inches tall, or in the fall
• Do not use a surfactant if liquid nitrogen is used as a carrier
• Do not use a spray adjuvant unless it is a non-ionic surfactant