In this case you can use the Permethrin SFR 36.8% at the .5% to the 1.0% based on the label with is (.5%) 1 2/3 oz - (1.0%) 3 1/3 oz per gallon of water. This usage ratio would keep you within the 1% mixture rate. This would be enough for fleas and other pests outdoors depending on the weather condition (amount of rain, UV rays, etc). You do want to be sure the pets are completely out of the area while you are spraying, and until the product dries.
Yes, Permethrin SFR is labeled for termites. It is recommended that you use this product around the perimeter of your home outdoors in a trench. The termites will come in contact with the treated soil and get it on themselves, but they will not take it back to the colony.
A better option would be to use Premise Foam in the areas where you have seen activity. This will be injected at the studs of the wall.
Yes, Permethrin SFR 36.8% is a non-selective insecticide, so it would kill roaches of any species or size that come into contact with the direct spray or residual. If you are only seeing roaches occasionally and need a residual spray to create a barrier, then you have many options. Temprid SC is water-based and contains two active ingredients for longer control. It also does not have the odor that sprays with permethrin will have. If you are seeing different life stages and/or seeing roaches consistently, then we would recommend our Roach Control Kit Rotation A. Please see our Roach Treament Guide for more information and tips.
After all surfaces treated with Permethrin SFR 36.8% are completely dry, the dogs can return.
Per the Permethrin SFR product label: "When treating poultry houses for bedbugs or chicken mites, apply as a spray 4 fl oz to 10 gallons of water. For severe infestation, it is permissible to use 4 fl oz to 4 gallons.
When treating poultry directly: Use 1-4 fl oz in 3 3/4 gallons water, which should treat roughly 375 birds. Use 1 gallon of coarse spray per 100 birds."
The shelf life for Permethrin SFR 36.8% is 3-5 years from the date of purchase if stored at room temperature. You shoudl only mix up what you are going to use the day you plan to make an application. Any mixed solution left in a sprayer will become ineffective. Always follow the product label for mixing and application rates for the pest(s) you are treating. Not following these guidelines can adversely affect the product and your results.
Yes, this product is labeled for use on livestock such as horses and cattle as well as other animals. We have listed the specifications for horses below but you can find more information on the Product Label.
For use on Horses to control:Horn flies, face flies,stable flies, house flies,horse flies, black flies,eye gnats, mange mites,scabies mites, ticks, lice and fleas: Use ¼ fl. oz. to 1 pt. water, 0.6257% AI. Low pressure spray. Application: 1-2 fl. oz. spray per animal. Spot treat back, face, legs tail and ears.
The mixing ratio of Permethrin SFR in diesel is 0.4 fl. oz. to one gallon.
Permethrin SFR 36.8% can be applied to cattle. For treating fly/lice, you will apply 4 fl oz per 2 1/2 gallons of low pressure spray or 1/2 fl oz per ear for ear tick. It can also be applied at the rate of 4 oz per 25 gallon (treats 50-100 heads). For scabies, mange, lice and ticks you will wet the animal thoroughly and repeat applications in 10-14 days. For a backrubber/self oiler, you will add 4 fl oz to 10 gallons of diesel oil or suitable mineral oil. Please refer to Pages 47 & 48 on the product label for specific mixing and application instructions prior to use.
Yes, Permethrin SFR 36.8% is labeled for bark beetles. The mixing ratio is 1 2/3 fl. oz per gallon of water. It is recommended that you spray the bark on the tree but not to the point of runoff.