Permethrin SFR 36.8% cannot be used in a fogger.
Permethrin SFR 36.8% has the highest percentage that is available through our company.
Permethrin SFR 36.8% can be effective against Browntail Moths but direct contact must be made to increase the effectiveness. Pesticides should be applied when caterpillars are small and feeding, usually before the end of May.
Control of browntail moth populations in isolated areas may be obtained by clipping the overwintering webs and destroying these webs by either soaking in soapy water or burning them, according to the law ordinances in your county. This control should be undertaken in the winter and very early spring. For more information you can contact your local cooperative extension office.
Permethrin SFR 36.8% is not specifically labeled for stored grain pests. We would recommend a product like Fenvastar EcoCap instead. You will need to use 1 oz of Fenvastar EcoCap per gallon of water. Please be advised that we are only able to ship within the U.S. at this time.
Permethrin SFR 36.8% is not labeled for chiggers and will not provide adequate results for you. Onslaught Insecticide is labeled for chiggers and can be used both indoors and outdoors as a broadcast spray. Keep in mind chiggers are not known to infest structures. Chiggers are most likely outdoors in your yard. Many people are lead to believe that the infestation is indoors because they do not feel the effects of the chigger bites right away and then are lead to believe they are being bitten at a later time.
No, Permethrin SFR 36.8% cannot be used in a fogger/mister. This product should only be used in a pump sprayer.
Permethrin SFR is not labeled for use on vegetable gardens and cannot be applied to anything edible.
Permethrin SFR 36.8% is not labeled to treat for white grubs. Milky Spore Spreader Mix is a great long term control granule for white grubs. Making 3 applications in Spring Summer & Fall over 2 years will provide your lawn with a 20 year protection against grubs. You can read more on How To Treat for Grubs here.
Permethrin SFR 36.8% is not labeled for applications on pecan trees for treating budmoths. We would suggest that you contact your local cooperative extension for a product recommendation and we will be happy to assist you!
Permethrin SFR 36.8% and Demand CS should not be mixed together. We recommend applying Demand CS alone for treating scorpions at a rate of 24 ml per gallon of water per 1,000 sq ft. For more information on treating scorpions, please take a few moments to review our article for a successful eradication program.
Permethrin SFR is a broad-spectrum insecticide that will flies and other common pests that contact the active ingredient or treated surfaces. Keep in mind that good fly control is dependent on locating and eliminating the breeding sites for these flies. Our Fly Treatment Guide has more tips on treating this pest.
The mixing rate of Permethrin SFR 36.8% is 1 2/3 fl oz per gallon of water.
To use Permethrin SFR 36.8% at a 2% solution, you would use 6 2/3 fl. oz. of concentrate with 121 1/3 oz of water to make 1 gallon of solution. That means a quart (32 oz) of concentrate would make about 4.8 gallons, or about 18 L of solution. Keep in mind that dilution rate is only for certain termite applications and not for general pest control use.
Permethrin SFR 36.8% would be considered acidic with a ph level between 4.8 to 5.0. The recommended psi for applications is not to go over 25 psi or 20 psi in some cases. We would recommend contacting the manufcaturer of your pressure washer and Control Solutions directly. The number for Control Solutions si 281-892-2500
