Price/Ea.
$79.26
Have a Question? Ask Our Pros!
Email Our Pros
We're here to help
Offline. Leave Us a Message
You May Also Need
-
Product Overview
Scotts Turf Builder EdgeGuard Mini Broadcast Spreader is from Scotts and has an EdgeGuard Technology. This feature allows blockage off the right side of the spreader pattern to keep fertilizer off of non lawn areas. Areas include: landscaping, sidewalks, out of waterways and driveways. There is less clean up, less waste and its great for the environment. Will provide superior results when used with fertilizer from Scotts. This mini spreader will deliver up to 5,000 square feet of products.
-
Details
For use in Turf and Lawns Coverage Area Spread width up to 5 ft. Material / Construction Rust Proof Hopper Special Features EdgeGuard feature that blocks off right side of spreader to prevent product from spreading onto non lawn areas and automatically controls the flow rate to ensure even application Shipping Weight 6.85 lbs Manufacturer Scotts (Mfg. Number: 76121) UPC 032247761215 INSTRUCTIONS:
1) Fill Hopper with Scotts lawn product of your choice.
2) Turn orange rate dial to correct setting listed in the Spreader Setting section on back of each package of Scotts product under "Scotts Broadcast/Rotary Spreaders".
3) To apply product, begin walking at a steady pace (4ft per sec) then squeeze and hold trigger.
4) When finished, sweep stray particles back onto lawn area.
5) Never leave product in spreader. Pour leftover product back into package and seal tightly.
After each use, wash spreader over the lawn to remove all product clinging to spreader. Allow to dry in the sun. Store in a clean and dry place.
For Rectangular Lawns:
Apply 2 header strips across each end for a turning area. Then apply back and forth in the longest direction.
For Irregular Shaped Lawns:
Apply one header strip around the entire lawn for a turning area, then apply back and forth.
Spreader Overlap:
Using wheel tracks as guide, make each pass 5 ft from the previous to ensure proper overlap and even lawn coverage. Do not leave spreader on when making turns.
-
Product Documents
-
Related Videos
-
6 Customer Reviews
Top Reviews
Another poor Scoots product
By Josh on 09/05/2019
Gears will not last through a single season. This is an issue with even their highest end spreaders.
Bad design….
By Matthew on 12/10/2021
Though I didn't buy it on this website I'm reviewing because I'm here to buy a new one to replace this unit after 2 uses. Which was 1 too many. Don't make the same mistake as me. The spreader is too …
Read Full Review »
Real Quality at a good price
By Steve on 11/17/2017
I was happy to get this real quality broadcast spreader. It replaced a cheap spread I had picked up at a local box store. DoMyOwn even has a price guarantee so I was completely happy with that as well…
Read Full Review » -
4 Questions & Answers
Helpful Q&A'sQHow wide of path does the Scotts Turf Builder EdgeGuard Mini Broadcast Spreader release of product?AIt appears to be a 5 foot swath that the Scotts Turf Builder EdgeGuard Mini Broadcast Spreader makes.
QParts for mini edge guard spreaderThe shaft on the rotary platform that distributes the fertilizer broke off from the platform. Can I get a replacement?AWe apologize but we do not carry any replacement parts for this spreader. We would recommend contacting Scott's directly for this item, they can be reached at 1-888-270-3714
QIs setting in lbs. per 1000 sq. ft on the Scotts Turf Builder EdgeGuard Mini Broadcast Spreader?ASpreaders like the Scotts Turf Builder EdgeGuard Mini Broadcast Spreader do disperse product per 1000 sqft but the settings are not the exact number for lbs per 1000 you use. It depends on the produ…
Read Full Answer »Spreaders like the Scotts Turf Builder EdgeGuard Mini Broadcast Spreader do disperse product per 1000 sqft but the settings are not the exact number for lbs per 1000 you use. It depends on the product that you are using, if a Scotts products they list their settings on their product bags specific for their spreaders. Due to the thousands of granules on the market and just as many different types of spreaders, you will want to calibrate your spreader to the product you are using and its application rates if yours is not listed. You can see a short video on how to accomplish this below.
