Have a Question? Ask Our Pros!
Close Up of drill shank is below. Please make sure your drill uses SDS Plus bits.
1/2 inch and 3/8 inch SDS PLUS hammer drill bits for termite treatments. Hammer drill bits are useful for drilling through concrete slabs when applying liquid termite control products. Drill holes should be placed 3 inches from the house and 10-12 inches apart. Once you have drilled the holes, use a pressurized sprayer to spray the termite chemical under the concrete slab. Holes can be filled with with 1/2 inch Trebor plugs or 3/8 inch Trebor Plugs.
SDS plus SDS plus drill bits have 4 grooves (2 open grooves, 2 closed), and can be used in regular SDS drills or SDS plus drills. The reason that SDS plus drill bits have 4 grooves is to support to extra torque that the SDS plus drill provides. They have a 10mm shank which is inserted 40mm into the chuck. They can be used in SDS hammer drills up to around 4kg in weight.
| Shipping Weight | 0.54 lbs |
|---|---|
| Manufacturer | J F Oakes |
1/2 inch and 3/8 inch hammer drill bits for termite treatments. Hammer drill bits are useful for drilling through concrete slabs when applying liquid termite control products. Drill holes should be placed 3 inches from the house and 10-12 inches apart. Once you have drilled the holes, use a pressurized sprayer to spray the termite chemical under the concrete slab. Holes can be filled with with 1/2 inch Trebor plugs or 3/8 inch Trebor Plugs.
Below is a close-up of the shank of the drill bit:
SDS Hammer Drill
By Anonymous on 07/30/2013
drill bit
By Lionel on 04/15/2014
as described
By N/a on 12/23/2014
Nice Bit
By Mark on 09/18/2015
Great drill bit and you guys rock!
By Steve on 04/29/2017
It is great doing business with you and the hammer drill bit is great. I've done over 150 holes through 4" concrete for termite perimeter treatment and the drill cuts fast and the tip looks like it hasn't been used yet. This bit may last forever! Thanks!
Was this review helpful to you? YesNo
4 of 4 people found this review helpful
I used a pressurized pump to pour termiticide in the drill holes, but the holes filled all the time real quickly with not enough product in the hole. I used a tank sprayer to apply the product, but it takes a long time. Any solution to this?
Was this answer helpful to you? YesNo
7 of 7 people found this answer helpful
Have multiple holes to drill and will be using hammer mode most of the time ... can it be re-sharpened as well?
Was this answer helpful to you? YesNo
5 of 5 people found this answer helpful
I haven't been able to find a drill bit that is 18" in length locally. I don't know what type of hammer drill we have and I'm concerned that the drill bit you have may not fit my drill so I rather purchase one locally but I can't find one that is 18". I find bits that have 16" usable area and 18" overall length including the shank. Is that the same case with the drill bit you you have on your website?
Was this answer helpful to you? YesNo
4 of 4 people found this answer helpful
Can I use it in any drill brand or is exclusive for Hilti products? I have a Dewalt drill SDS.
Was this answer helpful to you? YesNo
3 of 4 people found this answer helpful
If the dirt does go back in the hole before the Trebor plugs are installed, is it necessary to treat the soil used for the refill by spraying the soil with Termidor?
Was this answer helpful to you? YesNo
3 of 4 people found this answer helpful
SDS Hammer Drill Bit
Rating: 4.9 (8 Reviews / 12 Q&A)
