Surge is a post emergent herbicide that does not need to be watered in. If possible, do not water or irrigate the treated area for 6-24 hours after application. Also apply when rain is not expected within 6 hours.
The mixing ratio of Surge Broadleaf Herbicide in Bermudagrass is 1.0-1.2 fl. oz. per gallon of water. This product is also labeled for wild violet. Please refer to the product label for complete usage instructions.
Surge is in fact labeled to treat for Clover an common lespedeza in Centipede grass.
When using Surge Broadleaf Herbicide you would want to wait 3 weeks from the date of use to do any reseeding. Please let us know if we can be of any further assistance.
Once Surge Broadleaf Herbicide for Turf is applied, it is recommended that you wait until the product has dried completely to let children and/or pets back into the area.
It is best to apply Surge Broadleaf Herbicide for Turf when the weeds are no too wet from any rain or dew so that the product can be applied to the leaves and not drip off easily from being wet already. You should apply when rain is not expected within 24 hours after application as well.
Drive XLR8 could be mixed with Surge Broadleaf following the instructions on each product label for tank mixing.
Surge Broadleaf Herbicide is labeled to kill Ground Ivy also known as Creeping Charlie. If you need any other information on Surge Broadleaf Herbicide or instructions on how to use/mix, please follow the recommendations on the product label.
Surge Broadleaf Herbicide is labeled for both cool and warm season grasses and can be used to treat bullhead weeds. Please refer to the product label for specific instructions for your turf before applying.
The rate for Surge Broadleaf Herbicide for Turf is going to vary depending on the type of grass that you are applying the product to as directed on the product label. For example, for applying to warm season grass you would use 1.1 to 1.2 fl oz per 1000 sq ft and apply that in 0.23 to 5 gallons per 1000 sq ft when broadcasting or spot treating. That is the application rate that is recommended, regardless if you are using a pump sprayer or a hose end sprayer. When using you hose-end sprayer, you want to make sure that the settings are correct for the amount of product you are using per 1000 sq. ft. We do not actually carry the Ortho brand so are unable to provide the exact setting.