Talstar P is a excellent option for boxelder bugs. Be sure to spray around the perimeter of the home, around windows, doors, etc. where the bugs could get indoors. You should treat in late Summer and Fall once a month until the first frost. This product can also be used indoors around the perimeter of your home. The mixing ratio is 1 fl. oz. per gallon of water.
Be sure that you do not expect rain for at least 2 hours after Talstar P (Talstar One) application. Once dried Talstar leaves a residual for 2-3 months.
Talstar P(Talstar One) will kill deer flies that come in direct contact with the treated surfaces.
Our most popular general pest control product is called Talstar P. It is safe for indoor use around baseboards, cracks and crevices as well as for outdoor applications. It has minimum mild odor that dissipates by the time it's dry which can take up to two hours. Once the area treated is completely dry it is safe for everyone to go back including children and pets. It is a liquid concentrate and you can mix it at a rate of 1 oz per gallon of water for your first application and follow up at a rate of 0.5 oz per gallon of water. Indoors it can last up to 90 days and 30 days outdoors.
Talstar P is a great general use insecticide that can be used both inside and outside for over 75 different pests. It only kills the insects that contact a treated surface. Dominion 2L is a non repellent termiticide that can also be used a systemic insecticide for the listed pests. Dominion will help to eliminate more than just want contacts a treated surface or treated soil, social insects will crawl over the product without detecting it, and spread it to each other by touch and food sharing, eventually eliminating the entire infestation.
How long it takes the insects to die after they come into contact with a treated area will depend on a number of factors. It will depend on the maturity of the insect and type of insect as well as how long they stayed on the treated area, how long it has been since the area was treated and the concentration that was used to treat the area. Typically it can take anywhere from a couple of hours to a day or so for them to die
Talstar P (Talstar One) is not an instant kill for roaches so it will take time to eliminate them with the product and an IGR. The roaches also have to come in contact with the area that is treated with Talstar P. If you are not seeing success with this product and have been using it for a while, we would recommend using a product with a different active ingredient, such as Demand CS. We would also recommend adding a roach bait gel to your treatment program, if you are not already using one. Please see our Roach Treatment Guide for more information and tips.
Talstar P is the #1 recommended product for bagworm control. You will need to use 1 oz. of Talstar per gallon of water. Applications should start in April and continue monthly through June. Be sure foliage is sprayed thoroughly to the point of runoff to achieve adequate coverage. Talstar can be applied with a hose end sprayer, but it is best to use a hand pump sprayer if possible to ensure the most even coverage.
There is no valid reason to mix Suspend SC and Talstar P together. Talstar P is a synthetic pyrethroid and Suspend SC already contains a synthetic pyrethroid, so there would be nothing to gain by mixing these products together. Making a pesticide too strong can actually backfire. Areas that are treated with this overly concentrated spray will be repellent and insects will simply avoid the treated areas prolonging the infestation.
We recommend applying Talstar anytime of the day EXCEPT during the middle of the day. The key with mosquitoes is to apply to the underside of the leaves as that is where the adults lay during the day.
Yes, Talstar P will be a great choice for treating listed areas for Japanese Beetles. You will mix 1 oz per gallon per 1,000 sq ft.
Talstar P (Talstar One) can be dispersed in a hose end applicator. You will mix 1 oz per gallon of water per 1,000 sq ft. Please set your applicator to fit manufacturer settings accordingly.
Yes, Talstar P is labeled to kill and control wasps. The mixing rate is 1 fl oz per gallon of water. This will last for 30 days outdoors and 90 days indoors.
You can mix Talstar P with an herbicide as long as there are no restrictions on the label for the other product that you are using. We recommend performing a small jar test for compatibility any time you are using two new products together for the first time. Be mindful that you are only applying your herbicide in the correct areas.
Phantom is a non-repellent insecticide that also has a transfer effect and is especially useful for insects that are social or extra sensitive like ants, roaches or bedbugs. Talstar P on the other hand will have a faster knockdown rate and is a bit more versatile as it can be used in more areas and for a wider variety of insects. When trying to decide which insecticide to use you need to know: 1. What are you trying to eliminate? 2. What areas need to be treated? After you answer those questions, read the product labels to make sure the pest and the treatment area are both listed. If you still need help deciding you can call us at 866-581-7378.