Talstar P Professional Insecticide is a great safe product for general pest control both in and around the home. It dries clear, has no odor, is non-staining and non-irritating and can be used on lawns, bushes, ornamentals, trees and around the foundation of the home, as well as entry points like windows and doors. It will control over 100 different insects, including mosquitoes, flies, and spiders. It will typically last 30-90 days outdoors and at least 90 indoors along baseboards and cracks and crevices. Its safe for children and pets once dry and is very cost effective.
Yes, although Talstar P Professional Insecticide will kill fleas, you still need to incorporate an IGR like Tekko Pro to break down the reproductive cycle. You can apply both at the same time.
Yes, Talstar P is effective for treating clover mites. You will need to mix one ounce to one gallon of water per 1,000 sq ft.
Be sure to apply Talstar P Professional Insecticide on a day with little wind present to avoid drift to unwanted locations/unlisted areas (including on the applicator). We do offer a Basic Safety Kit for protective gear.
When using Talstar P Professional Insecticide for ant control, mix 1 fl oz per gallon of water, locate and treat ant nests, and trails around doors and windows and other places where ants have been observed or are expected to forage. Spray the exterior perimeter foundation 2 to 3 ft up and 2 to 3 ft out from the foundation. For ant control in the lawn, mix at the same 1 fl oz per gallon of water per 1,000 sq ft.
For treating Fire Ants, the best control is obtained by a broadcast application along with mound drenches. Apply broadcast treatments at 0.6 to 1 fluid oz. per 1,000 square feet. Treat mounds by applying 1 fl oz Talstar P Professional per mound in 1 to 2 gallons water by sprinkling the mound until it is wet and treat 3 feet out around the mound. Use the higher volume for mounds larger than 12”. Treat mounds with sufficient force to break their apex and allow the insecticide solution to flow into the ant tunnels. For best results, apply in cool weather (65 - 80?F) or in the early morning or late evening hours.
Please review the Application Directions Ant Control on page 4 of the product label.
Yes, you can apply Talstar P as a broadcast spray if you need to treat for turf pests or surface pests such as ants, webworms, chinch bugs, etc. You can use up to 1 oz per 1000 sq ft.
Talstar P Professional Insecticide should not be applied to any edible vegetation. And edibles that have been sprayed should be discarded and not consumed.
Talstar P Professional Insecticide will treat for ground beetles. Be sure to apply to cracks, crevices and entry points.
Talstar P, like most other insecticides on the market is non-selective and will kill most insects that come into contact with it. We do have a couple of products that may better fit your needs:
https://www.domyown.com/organocide-3in1-garden-spray-concentrate-p-8933.html
https://www.domyown.com/mavrik-perimeter-p-429.html
Yes, Talstar P Professional Insecticide will kill cicada killers. We also recommennd to dust in their holes with Delta Dust.
Talstar P Professional Insecticide is toxic to aquatic life. We recommend EcoVia around bodies of water.
Talstar can be applied with a pump sprayer or mist blower only.
We would not recommend treating the inside of the home with Talstar P for flea control. When used indoors, it is only labeled for a crack and crevice application. We recommend that you treat with the products in our Indoor Flea Kit. Also, please take a few moments to read our guide on How To Get Rid of Fleas for more helpful information.
Yes, Talstar P Professional Insecticide can be used on ornamental plants and is known for being super gentle.
Talstar P will kill any flies that come into contact with a treated surface. You may want to take a look at our Fly Control Guide for more information on treating and preventing this pest.
Talstar P is labeled to treat for termites and lasts for about 5 years in the ground when trenching. A better option for subterranean termites would be non-repellents like Termidor SC or Taurus SC. Termidor and Taurus will last up to 10 years in the soil. Non-repellents work slower but are much more effective when treating a termite colony as they are able to be transferred through the entire colony therefore eventually eliminating the colony.
Talstar P will kill stinkbugs. You should dilute one ounce of Talstar P per gallon of water. You will use a hand pump sprayer to apply the solution on all door frames, window frames, areas where utilities (cables, pipes, wires) enter into the structure, a band of soil 6 to 10 feet adjacent to the structure, also to a height of 2 to 3 feet on the foundation where pests may be active or may find entrance. As the stink bugs crawl over the treated area, they will receive a lethal dose of the insecticide and usually die within a few hours. You should treat every month starting in August and ending in November for the best results.
Talstar P is only specifically labeled for clover mites and spider mites. It would be a good idea to get an identification of the mite species you are dealing with to be sure you choose the right product.
If you are spraying porous surfaces you would want to choose a product such as Demon WP. It will stay on the surface of porous areas allowing insects to come in contact with it a bit better. That being said, Demon WP also leaves a white powdery residue that is visible on dark surfaces. Talstar P is a concentrated liquid that is odorless, dries clear and is labeled for a huge variety of insects and areas making it a bit more versatile. If you need to spray plants, trees and siding Talstar P would be a great choice.
For control of larger roaches outdoors, you will usually see best results using a granule bait for the insects applied in areas such as under decks and porches and around landscaping. Niban Granular Bait is a great option for this application.