Talstar P Professional Insecticide - Questions & Answers

Talstar P is very safe to use around children and pets once it is dry.  You are correct that you should remove the bird and any other animals and children from the room while you are performing the treatment.  Once the treatment is dry, which usually takes about 45 minutes, it is perfectly safe to place the bird and other pets back into the room.

You should avoid getting Talstar P into swimming pools though small amounts that accidentally get in a pool will be so diluted that there shouldn't be any concern. Talstar P is labeled to be used in food handling establishments and food handling areas but all of the food prep surfaces and food products and utensils must be covered and the application must be kept to cracks and crevices only. Talstar P is only labeled for use in cracks and crevices when using indoors which is why we would have said no to spraying on the surface of a seat (Talstar P is not labeled to spray on any furniture in general). If you choose to spray around or on your A/C unit you should shut it off prior to the application and resume operation after the application is dry. You should not spray the surface of your lawn furniture with Talstar P (or any other insecticide). If the surface has already been sprayed you should thoroughly wash it with soap and copious amounts of water. When used as directed on the Talstar P product label this product  and the dry residual it leaves behind is safe for people and pets.

We are not sure of the answer to your question. We recommend you contact the Talstar manufacturer directly for more information. You can reach FMC at 800-321-1362

Talstar typically is mixed at 1 ounce per gallon of water.  A 3/4 gallon jug is 96 ounces, so you could get 96 gallons of finished solution from one 3/4 gallon jug if you mixed at the normal rate of 1 ounce per gallon of water.

Our most popular general use product is called Talstar.  It is widely used by pest control companies because it is labeled for almost every insect you could have a problem with and you can use it outside the home as well as inside, it is odorless and very safe for use around children and pets.  It is a liquid concentrate that you mix with water in a one gallon hand pump sprayer.  It will last for 60 to 90 days outside in between treatments.  It is also labeled for lawn and ornamental use, and can be used on trees, plants, bushes and shrubs for all sorts of ornamental pests including Japanese beetles, mosquitoes, and other leaf eating pests.

Unfortunately there is no easy solution when it comes to pine beetles. Infected trees should be cut down (before the newly hatched beetles fly out of the trees in the spring/summer) and the wood burned or chipped, while other still healthy trees should be sprayed annually to protect them. Because of the natural boring behavior of the beetle they are protected from topically applied insecticides and systemic insecticides (those injected into the tree or applied as a root drench) have proven ineffective for pine beetle infestations. Healthy trees can be protected before the beetles attack by topically spraying them with a synthetic pyrethroid like Talstar. The tree should be sprayed from the ground to 15 ft up the trunk to prevent future infestations. You should contact your local cooperative extension office to find out the best time to start spraying in your region.

You can absolutely use Talstar P in a large 30 gallon sprayer. Just be sure you follow the correct usage rate for that much water. Talstar granules should be applied using a hand spreader or cart spreader and can be used in conjunction with the Talstar P.

Talstar does not offer an instant knockdown but it does offer a long term residual. Talstar can take several hours to kill insects when used as directed on the product label.

Talstar P would be a great product for the mosquitoes, ants, roaches and gnats. It is a liquid concentrate that you mix with water and apply using a sprayer.  You will need about 1 fl oz of product diluted into 1 gallon of water for every 1,000 sq ft of space you need to treat. The key is to apply it to all shrubs, trees, and other foliage around the house or patio where you are trying to provide relief.  It should be directed not only on top of the leaves and plants, but on the underside of the leaves as well which is where the mosquitoes hang out. Talstar P can also be applied to your lawn, exterior of your home for barrier insect control and indoors to control current infestations. Talstar should be applied every 30 days for optimum control. If you don't find a way to alleviate the moisture in the sink hole and in the gutters you will have a constant influx of new mosquitoes and gnats. While Talstar P may help limit their numbers you will keep seeing these pests.

You should use up the bottle of Talstar P within 3 years of the date of purchase for best results.

Talstar P is safe for use on most plants. Having said that we still recommend you test the product on just one or two plants before using it on all of the plants to test for damage as some plants can be more sensitive than others.

You can expect Talstar p to remain effective for 2-4 weeks outdoors for flea and tick control when used as recommended on the product label.

We have never heard of this being an issue. We recommend you contact the Talstar p manufacturer for more information. You can reach FMC by calling 800-321-1362.

You can mix Talstar P with Precor IGR for flea control. According to the new Talstar P product label you can make applications as spot or crack and crevice treatments to areas frequented by pets, such as under bedding, rugs, next to furniture. Vacuum prior to treatment.

What this means is that you cannot broadcast spray your entire carpet with Talstar, you must limit the treatment to "spot" treatments (areas that 2ft x 2ft or less). If you only need to spot treat certain areas you can use Talstar for fleas. If you need to broadcast over entire carpeted rooms you should choose a product which is labeled for indoor broadcast sprays such as Onslaught or Permethrin SFR.

Talstar P applications to cracks and crevices around the perimeter of each room, door frames, window frames and other areas where you see ladybugs emerging will help. You can also use a Fly Web light  to capture these nuisance insects as they seem to be attracted to light as well.

Talstar is our most popular selling product for mosquito control.  It is a liquid concentrate that you mix with water and apply using any hand pump sprayer or backpack sprayer.  The key is to apply it to all shrubs, trees, and other foliage around the house or patio you are trying to provide relief at.  It should be directed not only on top of the leaves and plants, but on the underside of the leaves as well which is where the mosquitoes hang out.  It should be applied every 30 days for optimum control.  It is also very good for bees and wasps, however you would not want to apply it or any other product directly to play sets where children will touch treated surfaces.  Also, Talstar is labeled for over 100 different insects and will work in just about any situation.

Essentria IC3 is the product of choice when you need to treat for mosquitoes around a body of water.  Essentria IC3 is a flexible, broad-spectrum EPA FIFRA 25(b) exempt product and is organic compliant.  This means it is a very safe insecticide for use around your family and pets, but still very effective.  One of the best features of Essentria IC3 is that it has no aquatic toxicity.  This means you can apply near or over water for spiders, mosquitoes and other water dwelling pests with no worries about harming aquatic life.

The 3/4 gallon of Talstar comes with a tip and pour measuring device. This means that you simply tip the bottle towards the measuring device and fill to the correct line for your usage.

To control sand moths/flies, you first want to remove all organic material the area. Next you want to apply a residual insecticide such as Talstar P. Talstar is odorless, dries clear, leaves no stains, is non-irritating to the skin, and won't break down easily with rainfall.

Talstar is safe to spray on the window screens. If will dry clear and is odorless. PLease be sure to keep all children and animals out of the area until the treated area dries.