Talstar P Professional Insecticide - Questions & Answers

These insects do not truly infest a home as they do not reproduce in the indoor environment, but they may still be abundant inside if their breeding site is close by. Unfortunately the breeding sites for these flies are so numerous and varied, it is impossible to eliminate them all. These tiny pests are small enough to crawl through the average window screen and fit through cracks and crevices around windows and door frames.

You can help prevent these flies from entering your home by spraying a barrier application of Talstar P paying special attention to window frames, window screens, door frames, and cracks and crevices that may be used as points of entry.  A screen with a very fine mesh (smaller than 16mesh) will help prevent entry. Additionally it may be helpful to keep ceiling fans and window fans on at high speeds to keep insects out of small areas.

If flies have already entered your home and you need immediate control use Microcare. This product offers a fast knockdown and kill of flying insects, giving you immediate relief.

Talstar P does work for stinkbugs and boxelder bugs. Talstar P does not have an immediate knockdown effect but it does leave a long lasting residual. We do encourage our customers to apply Talstar P once a month through the stinkbug/boxelder bug season (August-November).

How long it takes an insect to die after coming into contact with an area that has been sprayed with Talstar P will depend on several factors. How long has the Talstar P application been in place (the longer it has been there the more degraded it is and the longer it will take an insect to die), age and size of the insect, What species is the insect (insects with piercing sucking mouth parts such as spiders and scorpions take longer to succumb) and How long has the insect sat on the dry deposits of Talstar P. Generally speaking you can expect most insects to die within 24-48 hours of contact.

Talstar will kill any wasp, bee, or hornet that comes into contact with a treated area.  Keep in mind that this is not a contact kill product, so it can take up to 24 hours for the insect to die after contacting a treated surface. You can also use a product like Wasp Freeze as a contact kill. If you know where any of the nests are located, you can use Wasp Freeze to treat those directly as well. It is best to apply any insecticides in the early morning or evening when the wasps/bees/hornets are least active.  

If Talstar is stored with the cap tightly closed and in a moderate temperature area, the shelf life will be 3-5 years.

Talstar P (Talstar One) will kill bees and wasp that come incontact with the treated area. However, if you know where the nest is in the wall it would be best to use a dust. you can use a hand duster to apply a dust product such as Tempo Dust into and around the area where the bees seem to be gaining access to your home. Over a period of a couple of days to a week (timeline will depend on how many bees are contacting the treated area) this will kill off the colony that has taken up residence in your home. Any insecticide applications should be done very early in the morning or very late in the evening when the bees are less active. After the bees have been eliminated it is important to remove the bee hive from the void where the bees were nesting. Failure to remove the hive can lead to mold issues and secondary infestation from hive beetles and other insects. If the bee hive is in an area that is not easily accessible you may want to consider hiring a professional pest control operator.

Yes, Talstar P (Talstar One) is labeled for clover mites. You will use 1 fl. oz. per gallon of water. This can be broadcast across your lawn, on ornamentals, trees, etc. It cannot be sprayed on any type of edibles.

Talstar P (Talstar One) is labeled for Asian beetles aka lady beetles and should do a good job.

For best results, Talstar P should be applied in cool weather (65 - 80?F) or in early morning or late evening hours. You should not apply Talstar P or other insecticides when temperatures are near or below freezing.

The Talstar and Bifen will only kill the adults as the larvae is protected in its egg form much like a chicken egg is protected until cracked. To control the larvae you would need to mix the NyGuard IGR(birth control) in with the Bifen or Talstar. NyGuard is labled for fungus gnats as well as a large variety of other insects to sterilize the adults from being able to lay viable larvae. This will control the population drastically in keeping new ones from developing. You should mix 1 ounce of Talstar/Bifen with 4 ml of NyGuard IGR to each gallon of water you use.

Talstar P is labeled for gnats and should do a great job for you in killing the gnats that land on the treated surface but will not truly repel them from an area.  Do you know what type of gnat you are dealing with?  Where are you having the issue, inside or outside?

Yes, Talstar P like most insecticides will be harmful to fish if it gets into the pond. According to the Talstar product label: "This pesticide is extremely toxic to fish and aquatic invertebrates. Do not apply directly to water, to areas where surface water is present or to intertidal areas below the mean high water mark. Drift and run-off from treated areas may be hazardous to aquatic organisms in neighboring areas. Do not contaminate water when disposing of equipment washwaters. Care should be used when spraying to avoid fish and reptile pets in/around ornamental ponds."

Talstar P is a water based product that dries just as fast as water alone would dry.

Talstar P is our most popular product for white fly. It is important to spray the underside of the leaves on infested plants for effective control. Heavily infested leaves should be plucked off the plant and tossed in a bucket of soapy water.

We cannot find any systemic insecticides that are labeled for bagworm control. Acephate 75 was labeled for bagworm control but due to new EPA regulations they were forced to change the label and exclude using the product as a systemic. You should also note that systemic products are not the best choice if you already have damaging pests present because the products can take weeks or even months to translocate through large trees from soil applications. The best treatment for bagworms is a direct foliar spray with Talstar. 

Talstar P is safely used in homes with cats everyday. Be sure the cats are away from the area while Talstar P is being applied and they can return to the treated area after the application has dried. Please refer to the Talstar P product label for full usage instructions.

Talstar P will do a great job killing insects, but it will have no effect on a mouse. It is important when setting/placing traps for mice to put the traps directly into the travel paths that mice use. If the mice are not accepting peanut butter as a bait, you will need to try something else. Cotton balls with a drop of vanilla wedged onto the bait pedal, bits of string tied to the bait pedal or other items that you have noticed that they are already eating such as pet food or bits of bread work well too.

Talstar will kill spiders.  However, it is not a contact kill product....it is made more for longevity and having a long residual.  It will work much faster when a spider is present when you are spraying and you spray directly on the spider.  It will still not die immediately, but rather quickly. Once the spray dries, if a spider walks over it at a later time, it will pick up the dried Talstar on its body, but it will take much longer to kill it.  It can take hours to a day or so for it to finally kill the spider, depending on the size of the spider.  Most all residual insecticides will work this way.

Our most popular general use product is called Talstar.  It is widely used by pest control companies because it is labeled for almost every insect you could have a problem with and you can use it outside the home as well as inside, it is odorless and very safe for use around children and pets.  It is a liquid concentrate that you mix with water in a one gallon hand pump sprayer.  It will last for 60 to 90 days outside in between treatments.  It is also labeled for lawn and ornamental use, and can be used on trees, plants, bushes and shrubs for all sorts of ornamental pests including Japanese beetles, mosquitoes, and other leaf eating pests.

Yes.  Talstar is labeled for lawn and ornamentals and can be applied to any tree, bush, or shrub that is not a fruit or nut bearing tree.  It is commonly used to kill and prevent bagworms and other tree infesting insects.