We would not recommend treating the inside of the home with Talstar P for flea control. When used indoors, it is only labeled for a crack and crevice application. We recommend that you treat with the products in our Indoor Flea Kit. Also, please take a few moments to read our guide on How To Get Rid of Fleas for more helpful information.
Yes, Talstar P Professional Insecticide can be used on ornamental plants and is known for being super gentle.
Talstar P is labeled to treat for termites and lasts for about 5 years in the ground when trenching. A better option for subterranean termites would be non-repellents like Termidor SC or Taurus SC. Termidor and Taurus will last up to 10 years in the soil. Non-repellents work slower but are much more effective when treating a termite colony as they are able to be transferred through the entire colony therefore eventually eliminating the colony.
Talstar P Professional Insecticide is toxic to beneficial insects as well. The manufacturer recommends to apply when bees are not pollinating.
Talstar P will kill stinkbugs. You should dilute one ounce of Talstar P per gallon of water. You will use a hand pump sprayer to apply the solution on all door frames, window frames, areas where utilities (cables, pipes, wires) enter into the structure, a band of soil 6 to 10 feet adjacent to the structure, also to a height of 2 to 3 feet on the foundation where pests may be active or may find entrance. As the stink bugs crawl over the treated area, they will receive a lethal dose of the insecticide and usually die within a few hours. You should treat every month starting in August and ending in November for the best results.
Talstar P is only specifically labeled for clover mites and spider mites. It would be a good idea to get an identification of the mite species you are dealing with to be sure you choose the right product.
If you are spraying porous surfaces you would want to choose a product such as Demon WP. It will stay on the surface of porous areas allowing insects to come in contact with it a bit better. That being said, Demon WP also leaves a white powdery residue that is visible on dark surfaces. Talstar P is a concentrated liquid that is odorless, dries clear and is labeled for a huge variety of insects and areas making it a bit more versatile. If you need to spray plants, trees and siding Talstar P would be a great choice.
For control of larger roaches outdoors, you will usually see best results using a granule bait for the insects applied in areas such as under decks and porches and around landscaping. Niban Granular Bait is a great option for this application.
The Talstar P Professional Insecticide cannot be used in the Ryobi Battery Powered Mister/Fogger. Per Ryobi, commercial chemicals are not designed for use in that device, and Talstar cannot be run through any type of fogger whether thermal or cold fogger type. We would recommend you contact Ryobi to find out what insecticide solutions they recommend using in their equipment so as to not void any warranties or clog parts.
No, Talstar P Professional Insecticide cannot be used to treat for insects around boats or over areas of water such as lakes, rivers, ponds, etc. Unfortunately, there aren't any insecticides that can be sprayed directly to the outside surface of the boat, as any ingredients they contain could possibly harm the finish on the boat itself. If you have a boat dock, you can spray it with Essentria IC3 which is safe for aquatic life and would be the closest water safe product to Talstar, and covers the same range of insects. Inside the boat itself you can use an aerosol like D-Force to treat crevices and areas under/around seats and places insects tend to hide.
Talstar P Professional Insecticide is a water-based chemical and will not cause corrosion to stainless steel or galvanized metal. Keep in mind that you should not apply this product directly to food, feed, water, or sources for food or water. You also cannot apply this in a way that would contact the animals or their food or water. Keep in mind that a good fly control program includes the use of multiple control measures such as baits and traps, in addition to insecticides.
You can use a product like Talstar P to treat for crickets. Apply Talstar P as a crack and crevice or spot spray to areas where pests hide, such as baseboards, corners, storage areas, closets, around water pipes, doors and windows, behind and under refrigerators, cabinets, sinks, furnaces, stoves, the underside of shelves, drawers and similar areas. Do not use as a space spray. Pay particular attention to cracks and crevices. We recommend treating the outside perimeter to help stop insect pests from coming indoors to start with. Apply Talstar P to a band of soil and vegetation 6 to 10 feet wide around and adjacent to the structure. Also, treat the foundation of the structure to a height of 2 to 3 feet.
Talstar P (Talstar One) lasts for about 5 years in the ground and works as a repellent, killing only those insects that come into contact with the treated area. If you want to pre-treat before the slab is poured to control termites, Termidor SC would be the product of choice. Pre-slab and barrier treatments can last for up to 10 years for subterranean termite control.
If you are going to apply a ground sterilant you would do se after applying the Termidor SC to the soil.
Talstar P (Talstar One) is labeled for Japanese Beetles and you can add a product such as Exciter for a quick knockdown for insects. Rotating insecticides is a good idea to prevent resistance, but this normally takes years to happen. Some customers rotate every year or when they start to notice the product may not be working as well as it did at first. It would not hurt to use another active ingredient for your next treatment. It is important that you treat for the insect larvae, the grubs. Dylox 6.2 would be an excellent alternative when treating for grubs that are actively feeding. Please read the product label for application instructions. Arena Granules, Merit Granules or Dominion 2L will work well as a preventative if applied prior to egg hatch. You should check with your local cooperative extension office and speak to the master gardener on staff to establish the best time to put down a preventative treatment in your region. Please take a few moments to review our article on Grub Control also.
According to the Talstar P product label, "Fire Ant Mound control is optimized by combining broadcast applications that will control foraging workers and newly mated fly-in queens with mound drenches that will control existing colonies. If the soil is not moist, then it is important to irrigate before application or use a high volume application. Apply broadcast treatments at 0.5 to 1 fluid oz. per 1,000 square feet. Use enough finished volume to penetrate thatch or sod. Treat mounds by applying 1 oz of Talstar P per mound in 1 to 2 gallons water by sprinkling the mound until it is wet and treat 3 feet out around the mound. Use the higher volume for mounds larger than 12”. Treat mounds with sufficient force to break their apex and allow the insecticide solution to flow into the ant tunnels. For best results, apply in cool weather (65 - 80 degrees) or in early morning or late evening hours."
Talstar P is a liquid concentrate that must be diluted with water and applied using a hand or backpack pressurized sprayer. Talstar should be applied only as a spot or crack and crevice treatment indoors. Please refer to the product label for complete mixing and application instructions, as well as the required protective equipment. If you are applying inside a school, be sure to check with the governing authority on what products are allowed to be used in that environment.
Talstar can work great on ants and a variety of insects in the lawn, however the level of control you will see will depend on colony size and activity. You can use the Talstar to drench individual mounds to eliminate them quickly, and the spray the entire yard to help control any new activity that emerges over time. Ground bees are hard to control with sprays as they can often move between the blades of grass and directly into the holes without touching the leaf surface that contains the chemical. While tedious, the best way to eliminate a ground bee nest is to dust it with a product like Delta Dust which will get picked up on their bodies as they move in and out of the hole and get transferred to other bees. Dust in the late evening when they are less active and then give it at least a week or two for you to not see any more activity.
Talstar P (Talstar One) is mixed at 1 fl oz per gallon of water. It can be applied safely to ornamentals (nothing edible). While it might kill broad mites as well it is not labeled for them so we cannot recommend it for this use.
Unfortunately the state of Connecticut has limited most of the products out there on the market these days that can be shipped into the state without having a license to purchase them. Pest Xpert Home Barrier would be one option of a comparable insecticide spray to Talstar that could be used in CT. An all natural option that works similarly is Essentria IC3 and can cover a wide range of pests and usage areas like the Talstar as well.