Talstar P Professional Insecticide - Questions & Answers

Talstar, when mixed according to the product label with water is only strong enough to kill small insects, like ants or stink bugs. Your dogs would have to eat huge amounts of stinks bugs at one time to have any type of negative effect on them. In most cases your dogs would not be able to consume enough stinkbugs that have come into contact with treated areas for there to be any cause for concern.

Yes, you can use any size sprayer to apply Talstar.  You typically mix 1 ounce per gallon of water, so if you are using a 2 gallon sprayer and going to fill it all of the way, then you would mix 2 ounces with the 2 gallons of water.

Talstar P is our most popular product for control of zoysia mites. You will need to dilute 1 fl oz of Talstar P per gallon of water and apply the dilution over 1,000 sq ft.

Talstar p should not be used for indoor flea control because it is restricted to cracks and crevices indoors. Ultracide would be a much better choice for indoor flea control. It is our recommendation and industry standard that you vacuum immediately before the application of Ultracide and every day or every other day after the application for the next two weeks. Vacuums can physically remove a decent percentage of flea eggs that are in the carpet, along with much of the organic crud that the flea larvae feed on.  The vacuum will also stimulate the flea adults still in their pupa form to quickly emerge as the adult, and at this point perhaps be sucked up in the vacuum or exposed to the Ultraicde application.  After two weeks most infestations require that you do a second application of the Ultracide and continue with the vacuuming. You should use a product that is registered to use on your pets for fleas such as Frontline or Advantage. Talstar P can be used effectively outdoors for places where your pets may frequent and also moist shady areas where fleas are likely to develop. Treating outdoors will help prevent your pets from re-infesting your home.

Our most popular general use product is called Talstar.  It is widely used by pest control companies because it is labeled for almost every insect you could have a problem with (including ants, roaches and silverfish) and you can use it outside the home as well as inside, it is odorless and very safe for use around children and pets.  It is a liquid concentrate that you mix with water in a one gallon hand pump sprayer.  It will last for 60 to 90 days outside in between treatments.  It is also labeled for lawn and ornamental use, and can be used on trees, plants, bushes and shrubs for all sorts of ornamental pests including Japanese beetles, mosquitoes, and other leaf eating pests.

For mounding ants in the yard you may also want to consider using a bit such as Extinguish Plus. The bait will kill both the workers and other ants in the colony and sterilize the queens so the mounds won't keep moving and popping up in other places. (by using just a topical spray such as Talstar, only the ants that contact the treated areas are killed but the other ants that remain in the colony usually just move and make a new mound).

The Talstar manufacturer recommends that you wait one year before planting edible plants in a treated area or that you remove and replace the soil for immediate planting.

Yes, Talstar P does a fantastic job treating mole crickets.

Mole Cricket adults:Achieving acceptable control of adult mole crickets is difficult because preferred grass areas are subject to continuous invasion during the early spring by this extremely active stage. Applications should be made as late in the day as possible and should be watered in with up to 0.5 inches of water immediately after treatment. If the soil is not moist, then it is important to irrigate
before application to bring the mole crickets closer to the soil surface where contact with the insecticide will be maximized. Grass areas that receive pressure from adult mole crickets should be treated at peak egg hatch to ensure optimum control of subsequent nymph populations (see below).

Mole Cricket nymphs: Grass areas that received intense adult mole cricket pressure in the spring should be treated immediately prior to peak egg hatch. Optimal control is achieved at this time because young nymphs are more susceptible to insecticides and they are located near the soil surface where the insecticide is most concentrated. Control of larger, more damaging, nymphs later in the
year may require both higher application rates and more frequent applications to maintain acceptable control. Applications should be made as late in the day as possible and should be watered in with up to 0.5 inches of water immediately after treatment. If the soil is not moist, then it is important to irrigate before application to bring the mole crickets closer to the soil surface where contact with the insecticide will be maximized.

Talstar is not labeled to be applied to any type of animal.  If you are trying to treat your dog for felase we do carry several products that are labeled for use on dogs, you can find them here.  Our most popular product is the PetCor Flea Spray.  Petcor Flea Spray contains Precor IGR, an insect growth regulator that targets fleas in the egg and larval stages of development. As a result, pre-adult fleas cannot produce new infestations of breeding, biting adults.

Both talstar P and Demand CS are great products. Demand CS is micorencapsulated so the active ingredient is released slowly over time, making for a longer lasting residual.

Talstar is safe for people and pets to re enter the treated area after it has dried. They should not be in the area when the product is being applied.

Talstar P (Talstar One) is a great product to use for mole crickets. Great news, Talstar will not cause any harm to grass. In fact Talstar is labeled to be used on trees, shrubs, lawns, and indoors cracks and crevices.

Talstar may not be applied in kitchen cabinets. If you are looking for a crack and crevice spray you can spray in the cabinets, you can use Cy kick aerosol. Please be sure to remove all food and food handling items before application.

The particle size in Talstar is too large to use in ULV fogger and could clog it. We would recommend when indoor fogging using Riptide. Riptide Waterbased Pyrethrin ULV is new technology that delivers effective control of a wide range of insects including mosquitoes, stored product pests, cockroaches, biting insects, crawling insects, flies and more without oil residues or oil-related issues.

Any temperature between 40F and 85F is just fine to apply Talstar P.

Talstar P is not labeled to be used in any type of fogging equipment. Talstar P should be applied in a hose end sprayer, hand held pump sprayer, backpack sprayer or a mist blower only.

Yes, any drastic change in temperature will definitely affect the residual and potency of Talstar P. We recommend storing in a dry cool environment with not much temperature change to get the longest life out of the product. Please read the label for storage information.

When using Talstar P, the mixing ratio is 1 fl. oz. per gallon of water. This will generally treat 1000 sq. ft. For your lawn, you will need to fill up your sprayer at least three times to complete your entire lawn. The pint size of Talstar P would make 16 gallons of solution and treat 16,000 sq ft.

Both non-repellents and repellent insecticides will eventually eradicate the pests that the products are labeled for. Non-repellents allow more time for the insects to be able to take the product back to their colony and transfer the product among each other. "Repellent" insecticides, such as Talstar P, are not detected until the insect you're treating comes in contact with the product - it will give off a "tingling" sansation or so to the insect but by then it will be too late for the insect. Eventually both types of products will work as long as the right amount of product is being used. Talstar P is a great choice to someone beginning to do their own pest control. Please see our Pest Library for more detailed information about specific pests.