Talstar P Professional Insecticide - Questions & Answers

Talstar P is a recommended product for mosquito control. You will need to spray more than just the outside of your home though. You will need to spray the underside of the leaves on trees and bushes nearby as that is where the mosquitoes spend the heat of the day. We have also had good reviews from people who sprayed a 2 foot band around the perimeter of their property.

There are many products on the market that have a long lasting residual. Unfortunately, all of them will only have very limited results. Stink bugs move into structures to overwinter. They usually squeeze into wall voids, false ceilings, attics and other areas that are inaccessible to people and insecticides. As the heat kicks on in the house, the stink bugs warm up and start becoming active and emerge from hiding, driving residents nuts. Because most folks usually have no idea where the bugs are harboring you can only treat around baseboards, door frames and window frames and hope the insects will emerge where you have sprayed. After they contact the treated areas, it can take several hours for them to die. It is still worth spraying now to get rid of some of the bugs, but you will keep seeing them until spring when they will emerge en masse and leave the building. They do not eat, mate or lay eggs while indoors so need to worry about any damage or future baby stink bugs. This year you can be proactive by stopping these pests before they move in for the winter. You can use Talstar P outdoors around your door frames, window frames, vents, eaves, around the bottom of your foundation, and any other crack or crevice where an insect could gain entry, once a month August-November.

Yes Talstar P can be used in a hose end sprayer as long as the hose end sprayer can be properly calibrated to spray the correct amount of product per gallon of water.

You can apply Talstar P with a handpump sprayer or a hose end sprayer. Either applicator will work fine and it really boils down to personal preference. If you are treating a large yard it may be more convenient to use a hose end sprayer to avoid constantly refilling a smaller hand pump sprayer.

Talstar P would be a great product for you to use for the spiders and the ants on your property. Talstar P can be used in your yard, around the perimeter of your home and also inside your home when needed and it is safe for use around pets. Since grubs live underground they must be treated with a product that will target them where they live. We do have several products that are specifically labeled for grub worms on our website: Grub Worm Control. We also recommend that you contact your local cooperative extension office and inquire about the best time to start treatments for grubs in your region.

Unfortunately there is no easy solution when it comes to pine beetles. Infected trees should be cut down (before the newly hatched beetles fly out of the trees in the spring/summer) and the wood burned or chipped, while other still healthy trees should be sprayed annually to protect them. Because of the natural boring behavior of the beetle they are protected from topically applied insecticides and systemic insecticides (those injected into the tree or applied as a root drench) have proven ineffective for pine beetle infestations. Healthy trees can be protected before the beetles attack by topically spraying them with a synthetic pyrethroid like Talstar. The tree should be sprayed from the ground to 15 ft up the trunk to prevent future infestations. You should contact your local cooperative extension office to find out the best time to start spraying in your region.

As long as the grass and other areas are dry it is okay to go ahead and spray Talstar P.

As long as Talstar p is not sprayed directly on the lizards the product should not cause them harm. You will see a reduction of the little lizards however because by spraying Talstar P you will be eliminating their food source near your home and the lizards will naturally go in search of better hunting grounds.

Talstar P is an insecticide only, it is not an IGR nor does it contain an IGR. Talstar is not really a great choice for indoor flea control because it can not be broadcast sprayed over floors where the fleas tend to harbor. For indoor control you can use Ultracide comes ready to use, no mixing or equipment is needed and it contains both an insecticide for a quick knock down of biting adults and an insect growth regulator (IGR) for control of developing flea eggs and larvae. Infested areas should be thoroughly vacuumed prior to product applications to help remove as much flea eggs, larvae and debris as possible and also to help stimulate larvae to change stages and come into contact with the product. You should continue to vacuum at least every other day for the next two weeks.

You can use the jug but you must rinse it several times and spray water through the hose and nozzle several times to make sure all of the residuals are gone. For most Talstar P general pest control applications you will use 1 fl oz of Talstar P per gallon water. Please refer to the Talstar P product label for complete usage instructions.

Our most popular general use product is called Talstar. It is widely used by pest control companies because it is labeled for almost every insect you could have a problem with and you can use it outside the home as well as inside, it is odorless and very safe for use around children and pets. It is a liquid concentrate that you mix with water in a one gallon hand pump sprayer. It will last for 60 to 90 days outside in between treatments. It is also labeled for lawn and ornamental use, and can be used on trees, plants, bushes and shrubs for all sorts of ornamental pests including Japanese beetles, mosquitoes, and other leaf eating pests. Talstar is also available in a granule formula called Talstar PL if you prefer to use granules.

Our Complete Ant Kit is perfect for sugar ants, or argentine ants which is what their real name is.  The ants will eat the products in the Complete Ant Kit and take them back to wherever their colony is and feed the bait to the queen and all of the other colony members.  Usually within 5 - 10 days the entire colony will be eliminated.  The ant gel is for placement inside the home or car, and the granules are meant for outside around the home.  However, since our kit comes with bait plate stations, you can place both the gel and the granules in the bait plate stations so the ants inside the car have a choice when feeding.

Talstar P is an excellent all around pest control product, labeled to work for 75 different insect pests. It is labeled to be sprayed as a perimeter treatment for the home as well as treating of lawn, ornamentals, and mulch.

Talstar P (Talstar One)  will not harm horses as long as the area treated is not a grazing area. Keep them out of the area until the product has dried. 

Over-spraying of Talstar P (Talstar One) should not harm most flowers. It is always best to apply in the cooler times of the day. You should also avoid spraying the flowers directly to have the least impact on beneficial pollinators in the area.

When treating for chinch bugs with Talstar P, it is recommended that you do a second treatment 21-30 days after the first treatment. You will use 1 fl. oz. of Talstar P per gallon of water. This will treat 1000 square feet. Be sure to water the product in at least 0.5 inches after it has been applied.

Unfortunately, we do not ship to Canada at this time.  Many of our Canadian customers will have a product shipped to someone in the United States that they happen to know like a friend or family member, and then they forward it onto you in Canada. We do offer FREE shipping within the US. We apologize, but we are unaware of where you can get these products in Canada.

Termidor SC around the perimeter of the home would be better than Talstar P.  Termidor will have transfer effect so can help to eliminate the entire colony whereas Talstar P will only kill the ants that contact a treated surface.  It can be applied twice a year or four times a year outside depending on the rate. This link can explain.

Yes, Talstar P can be used for millipedes. The mixing ratio is 1 fl oz per gallon of water. The residual outdoors will be 30 days and 90 days indoors. 

When treating for chinch bugs with Talstar P, it is recommended that you do a second treatment 21-30 days after the first treatment. You will use 1 fl. oz. of Talstar P per gallon of water. This will treat 1000 square feet. Be sure to water the product in at least 0.5 inches after it has been applied.

Some insecticides, like Talstar P, can be harmful to beneficial insects such as honey bees. Per Talstar P's label, Talstar "is highly toxic to bees exposed to direct treatment of residues on blooming crops or weeds", so we wouldn't recommend spraying while bees are present or on blooms that bees can later land on. Tekko Pro IGR is just a growth regulator not an insecticide so as long as it's used as directed, it shouldn't harm beneficials. As far as BTI, if you're referring to the BTI Mosquito Dunks, that product is a larvacide and it only goes in water retention sites. If you meant Monterey B.T. Insecticide, the product "has no effect on birds, earthworms or beneficial insects such as honeybees and ladybugs, when used as directed." We recommend to always read the label of the product you decide to use to know how to use it properly and to check how it can affect beneficial insects.