Talstar P Professional Insecticide - Questions & Answers

Yes Talstar P can be used in a hose end sprayer as long as the hose end sprayer can be properly calibrated to spray the correct amount of product per gallon of water.

You can apply Talstar P with a handpump sprayer or a hose end sprayer. Either applicator will work fine and it really boils down to personal preference. If you are treating a large yard it may be more convenient to use a hose end sprayer to avoid constantly refilling a smaller hand pump sprayer.

Talstar P would be a great product for you to use for the spiders and the ants on your property. Talstar P can be used in your yard, around the perimeter of your home and also inside your home when needed and it is safe for use around pets. Since grubs live underground they must be treated with a product that will target them where they live. We do have several products that are specifically labeled for grub worms on our website: Grub Worm Control. We also recommend that you contact your local cooperative extension office and inquire about the best time to start treatments for grubs in your region.

Unfortunately there is no easy solution when it comes to pine beetles. Infected trees should be cut down (before the newly hatched beetles fly out of the trees in the spring/summer) and the wood burned or chipped, while other still healthy trees should be sprayed annually to protect them. Because of the natural boring behavior of the beetle they are protected from topically applied insecticides and systemic insecticides (those injected into the tree or applied as a root drench) have proven ineffective for pine beetle infestations. Healthy trees can be protected before the beetles attack by topically spraying them with a synthetic pyrethroid like Talstar. The tree should be sprayed from the ground to 15 ft up the trunk to prevent future infestations. You should contact your local cooperative extension office to find out the best time to start spraying in your region.

As long as the grass and other areas are dry it is okay to go ahead and spray Talstar P.

As long as Talstar p is not sprayed directly on the lizards the product should not cause them harm. You will see a reduction of the little lizards however because by spraying Talstar P you will be eliminating their food source near your home and the lizards will naturally go in search of better hunting grounds.

Talstar P is an insecticide only, it is not an IGR nor does it contain an IGR. Talstar is not really a great choice for indoor flea control because it can not be broadcast sprayed over floors where the fleas tend to harbor. For indoor control you can use Ultracide comes ready to use, no mixing or equipment is needed and it contains both an insecticide for a quick knock down of biting adults and an insect growth regulator (IGR) for control of developing flea eggs and larvae. Infested areas should be thoroughly vacuumed prior to product applications to help remove as much flea eggs, larvae and debris as possible and also to help stimulate larvae to change stages and come into contact with the product. You should continue to vacuum at least every other day for the next two weeks.

You can use the jug but you must rinse it several times and spray water through the hose and nozzle several times to make sure all of the residuals are gone. For most Talstar P general pest control applications you will use 1 fl oz of Talstar P per gallon water. Please refer to the Talstar P product label for complete usage instructions.

 

According to the Talstar P product label, you will need to use 1 oz of Talster per gallon of water and then apply at the rate of 4 gallons of dilution per 10 linear feet of trench. You will need to calculate how many linear feet you have around the structure you wish to treat to find out how much Talstar you will need to purchase. Please take a few minutes to read over our termite article How to do a Termite Treatment so you will have a better understanding of what may be required for the treatment process. Drywood termites require treatment with a product such as Bora-Care. Please take a few moments to review our article on How to Get Rid of Drywood Termites for additional tips.

 

Talstar P mixed with an Insect Growth regulator such as Nyguard IGR would be a good choice for tick control. Talstar P would work to kill ticks that come into contact with treated surfaces while the Nyguard would work to help stop juvenile ticks from reaching sexual maturity. We recommend using  the highest usage rate of 1 oz Talstar  and 1 oz of Nyguard IGR per gallon of water.

There is no particular time that you have to spray. Most people spray outside in early in the morning or when there is the least amount of insect activity. You will mix 1 oz of Talstar P with 1 gallon of water. That will treat 1,000 sq feet. 

Talstar P can be applied on the ground when there is a small amount of dew. Allow to fully dry prior to rain fall, 24 hrs.

For roach control using Talstar P, we would recommend using the higher rate of 1 oz. of Talstar P per gallon of water. Keep in mind that you should not rely on a spray like Talstar P as the only product you are using to eliminate a roach infestation. We also recommend using a roach bait gel and an Insect Growth Regulator (IGR) for the most complete roach control. We sell these items together in our Roach Control Kits. Please take a few moments to review our online Roach Treatment Guide for more tips.

Yes, Talstar P does a great job controlling Japanese Beetles. You will mix 1 oz per gallon of water per 1,000 sq ft. Talstar P should be applied every 30 days. 

Talstar P (Talstar One) is an insecticide and will not affect snakes or toads.

Talstar P can be used to kill carpenter ants that are sprayed directly or which contact the residual spray. However, Talstar P will not transfer throughout an ant colony to kill the entire colony. If you are finding carpenter ants trailing indoors, then we recommend our Indoor Carpenter Ant Kit, which includes two different baits, refillable bait stations, and a residual spray with two active ingredients. If the ants are in a wall void and you are unable to bait for them, then another great option is applying a ready-to-use non-repellent foam such as FUSE Foam into the wall void where the nest is. Please refer to our online Carpenter Ant Treatment Guide for more tips.

Yes. Talstar P Professional Insecticide is labeled for treating mealybugs.

Talstar P (Talstar One) should NOT be applied to lemon trees or other edible vegetation. If the edibles were treated, you should not consume the fruit. Please provide the targeted pest for an alternate product recommendation for treatment.

Yes, Talstar P can be used for fire ant control in the type of sprayer you described, but you will also need to do mound drenching. According to the Talstar P product label, "Fire Ant Mound control is optimized by combining broadcast applications that will control foraging workers and newly mated fly-in queens with mound drenches that will control existing colonies. If the soil is not moist, then it is important to irrigate before application or use a high volume application. Apply broadcast treatments at 0.5 to 1 fluid oz. per 1,000 square feet. Use enough finished volume to penetrate thatch or sod. Treat mounds by applying 1 oz of Talstar P per mound in 1 to 2 gallons water by sprinkling the mound until it is wet and treat 3 feet out around the mound. Use the higher volume for mounds larger than 12”. Treat mounds with sufficient force to break their apex and allow the insecticide solution to flow into the ant tunnels. For best results, apply in cool weather (65 - 80F) or in early morning or late evening hours."

Talstar P is applied at the rate of 1 oz. per gallon of water per 1000 sq. ft. for June bugs.  You can apply monthly outdoors and every 90 days indoors.