According to the Talstar P product label, you will need to use 1 oz of Talster per gallon of water and then apply at the rate of 4 gallons of dilution per 10 linear feet of trench. You will need to calculate how many linear feet you have around the structure you wish to treat to find out how much Talstar you will need to purchase. Please take a few minutes to read over our termite article How to do a Termite Treatment so you will have a better understanding of what may be required for the treatment process. Drywood termites require treatment with a product such as Bora-Care. Please take a few moments to review our article on How to Get Rid of Drywood Termites for additional tips.
Talstar P mixed with an Insect Growth regulator such as Nyguard IGR would be a good choice for tick control. Talstar P would work to kill ticks that come into contact with treated surfaces while the Nyguard would work to help stop juvenile ticks from reaching sexual maturity. We recommend using the highest usage rate of 1 oz Talstar and 1 oz of Nyguard IGR per gallon of water.
Talstar P can be tank mixed as long as both product labels are followed for rates. Talstar is a great product to use for beetles, just avoid spraying the blooms to prevent burning/harm.
Yes, you will use 1oz of Talstar per gallon of water, and apply to your lawn for armyworms. For best results, delay watering or mowing for at least 24 hours after application.
Talstar P (Talstar One) is an insecticide and will not affect snakes or toads.
Talstar P can be used to kill carpenter ants that are sprayed directly or which contact the residual spray. However, Talstar P will not transfer throughout an ant colony to kill the entire colony. If you are finding carpenter ants trailing indoors, then we recommend our Indoor Carpenter Ant Kit, which includes two different baits, refillable bait stations, and a residual spray with two active ingredients. If the ants are in a wall void and you are unable to bait for them, then another great option is applying a ready-to-use non-repellent foam such as FUSE Foam into the wall void where the nest is. Please refer to our online Carpenter Ant Treatment Guide for more tips.
It is not usually required to use a surfactant with Talstar P but adding one will increase the effectiveness and help it stick to waxy leaves better. The Hi-Yield Spreader Sticker would be a great choice.
Yes. Talstar P Professional Insecticide is labeled for treating mealybugs.
Talstar P (Talstar One) should NOT be applied to lemon trees or other edible vegetation. If the edibles were treated, you should not consume the fruit. Please provide the targeted pest for an alternate product recommendation for treatment.