Talstar P Professional Insecticide - Questions & Answers

Displaying 481 to 500 (of 1250 questions)
Sort:
  • Asked by Angel from Capitol Heights,md
    06/13/2012
    Q
    How often should I spray Talstar P for a roach infestation?
    A
    For indoor roach control you can spray Talstar P once every 14 days at the beginning of the treatment program and then reduce the applications to once every 90 days for maintenance.
    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Sharon from Scurry Texas
    06/25/2012
    Q
    Grasshoppers, plague proportions, what's the recommended product?
    I would like to use a hose end sprayer with the water hose. I see the video of a gallon jug - being used only around the edges and crevises. I've got to cover the entire ground.
    A
    You can use Talstar P to cover non fruit bearing trees, lawns, bushes, shrubs and other areas excluding edible vegetation. Talstar P can be used in a hose end sprayer and should be diluted 1 fl oz per gallon of water for the fastest knockdown and the longest lasting residual for grasshopper control.
    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
  • Asked by Roland from Santa Fe Tx, Galveston County
    06/29/2012
    Q
    What should I use for a heavy infection spidermites in 20 ft tall junipers?
    junipers 20ft tall how to best controll galveston tx.
    A
    Talstar works well for both the mature and the immature spider mites. Talstar provides optimal spider mite control when applied during spring to mid-summer. Higher application rates and/or more frequent treatments may be required for acceptable spider mite control during mid- to late-summer. The addition of a surfactant or horticultural oil may increase the effectiveness of Talstar. Talstar applications may be rotated with those of other products  that have different modes of action in control programs that are designed  to manage resistance by two-spotted spider mites. Consult your local Cooperative Extension Service for resistance management recommendations in your region.
    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Hiya from Portland, Oregon
    07/11/2012
    Q
    Can Talstar get tracked into the home?
    This product leaves a dry residual (which obviously then sticks to & kills bugs) and is also recommended for spraying around doorframes. Thus the dry residue will get stepped on when people come & go through the door, and so it seems at least some product will definitely get tracked into the house. This seems to be a possible health concern, as it will then get further tracked onto rugs/furniture/etc, where it is NOT supposed to be applied. Is this reasoning correct?
    A
    No. Talstar does not get stuck to bugs as you described. Talstar will bind to the surface on which it has been sprayed and insects must be on treated areas for a certain length of time to receive a lethal dose. That is why the Talstar P label recommends that you spray the product directly into areas where insects harbor and travel and that broad areas are treated around the home.
    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
  • Asked by Brenda from Lanesboro, Mn
    10/17/2017
    Q
    What does Talstar P do to pests? Kill them or keep them away?
    A

    Talstar P (Talstar One) kills insects as they come into contact with the treated area (perimeter, bushes, lawn, ornamentals, baseboards, around windows, doors) 

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Johnnie from Belmont, Nc
    11/17/2017
    Q
    Is Talstar, sprayed from a backpack mister, effective on cankerworms?
    A

    Talstar is not labeled for cankerworms.  The most widely recommended product to use for cankerworms is Bacillus thuringiensis, or B.t.  A product like Monterey B.t. Insecticide may be a better option for you.  There is a great article here on the treatment and prevention of cankerworms. 
     

    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
  • Asked by Marsha from Hoagland, In
    01/22/2018
    Q
    Can Talstar P be mixed with a fungicide and applied to flowering perennials all in one application?
    A

    As long as you follow instructions for each product you can tank mix Talstar P (Talstar One) with a fungicide.  Applications to blooms should be avoided.

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Tara from Se Cape Coral
    05/19/2018
    Q
    how long after mixing and useing..if theres leftover..is it still good...and for how long?
    do you do room by room ?or can you do it 2/3/days.....cant afford to waste any talastar..so is there a shelf life of the mixture....or do i have to make a new mix..
    A

    Talstar P (Talstar One) should be used within 24 hrs of mixing with water and then discarded. 

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Tara from Cape Coral
    05/21/2018
    Q
    How long will Talstar P last once mixed?
    A

    You should use Talstar P (Talstar One) within 24 hours of  mixing.

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Sally from Fl
    05/28/2018
    Q
    What tablespoon setting should I use for use Talstar P with a hose sprayer?
    A

    Talstar P is mixed at 1 fl oz (2TBSP) per gallon of water per 1,000 sq ft.

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Bruce from Limcoln, Ne
    05/28/2018
    Q
    Will Talstar P pollute well water or make it unsafe to drink?
    A

    Talstar P should be applied at least 5 feet away from a well.

    Was this answer helpful to you?   Yes No
    3 of 6 people found this answer helpful.
  • Asked by Eddie from Carteret, Nj
    05/28/2018
    Q
    I accidentally mixed 2 oz of Talstar to 1 gallon of water. Will that make the product less effective?
    A

    It should not harm anything to apply Talstar at this rate one time. We recommend that you wait for 30 days outside (90 days inside) to reapply at the rate of 0.5-1 oz per gallon of water.  

    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
  • Asked by Nick
    05/29/2018
    Q
    How often do you need to spray for mosquitoes using Talstar P?
    A

    It is recommended to apply Talstar P monthly for mosquitoes. 

     

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Dan
    06/02/2018
    Q
    Does Talstar have a negative impact on any shrubs or new flowers?
    A

    Talstar P is gentle on ornamentals, lawns, trees etc if used as directed on establised plants if as directed on product label.

    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
  • Asked by Danny from Anderson
    06/05/2018
    Q
    Will Talstar P kill hookworms in my yard?
    My dogs are getting hookworms and my vet is saying it's coming from my yard.
    A

    Unfortunately there is not a product on the market that is labeled or recommended for hookworms. While some insecticides like Talstar P (Talstar One) are labeled for turf or lawn infesting insect may work, there has not been enough research to add hookworms to the product labels. We recommend that all animals be moved out of the contaminated area for at least 1 year (during warm spring/summer months, longer during cool winter/fall months) and all feces be removed. Keeping the animals out of the contaminated area for at least 1 year should help control the infestation pattern. It is also important to remove feces from the new latrine area to avoid another infestation.  Another option is to remove the contaminated soil and replace if you cannot keep out for 1 year.

    Was this answer helpful to you?   Yes No
    3 of 5 people found this answer helpful.
  • Asked by Scott from Frenchtown
    06/18/2018
    Q
    What spray product would you recommend to kill and or repel mosquitoes without harming honey bees?
    A

    A broad-spectrum insecticide such as Talstar P could potentially kill bees if they are sprayed directly or if they contact the treated areas. For this reason, we do not recommend spraying residual insecticides on flowering plants, and we recommend spraying in the morning or evening when pollinators are less active. There is a product called Mavrik Perimeter which is non-toxic and non-repellent to honey bees once dry. Another option would be to use a repellent such as Mosquito Barrier which is only a repellent once dry.

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Matt from Md
    06/28/2018
    Q
    Talstar mixed with Trimec, Tenacity, Drive, fertilizer, etc
    I would like to tank mix the following in a 35 gallon sprayer in the appropriate amounts for my 1 acre yard, Talstar, fertilizer, tenacity, DyneAmic, & blue marker in the early spring. And then Talstar, fertilizer, trimec, drive, DyneAmic. and blue marker in the summer and fall. I *think* from reading labels and Q&A here, that these mixes are acceptable and 35 gallons of water is enough to not have anything be too hot. This mix in this tank towed behind my tractor should (I think) cover my entire yard, which is about 38,000 SqFt. There seems to be a few Q&As that say never to mix insecticides with other treatments. But then there are lots that say it's fine.
    A

    There are typically no issues mixing different kinds of sprays together, such as an insecticide and fertilizer or fertilizer with herbicide. We always recommend doing a small jar test for compatability when mixing any products together for the first time, unless the product labels expressly address the tank mix you are using.

    There are two things I would caution you against with these mixtures. One is if you are using herbicides for your turfgrass and wanting to use an insecticide for mosquito control at the same time. For mosquito control, you want to use a product like Talstar P on ornamental shrubs, tree branches, etc.; however, you should not spray post-emergent herbicides like Drive, Tenacity, or Trimec on these areas since those herbicides would damage your ornamental plants.

    We would also be careful about mixing more than 2 herbicides at one time since this could cause extra stress on your turfgrass.

    Please let us know if you have any other questions.

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Samuel from Port Harcourt, Nigeria
    07/14/2018
    Q
    What type of face mask can I use to apply Talstar P.
    A

    A mask is not required to apply Talstar P if you are applying in a well-venitlated area.  If you are applying in a small, confined space with poor ventilation, you can use something like the N95 Valved Respirator Mask.  Please be advised that we are only able to ship within the U.S. at this time.  

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by David from Dallas, Tx
    08/21/2018
    Q
    What is best way to clean a pump sprayer after using Talstar or any general insecticide?
    A

    It is usually recommended to clean a sprayer by triple rinsing with clean water.  You can also use a tank cleaner.  

    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
  • Asked by Jason
    08/30/2018
    Q
    Is Talstar P a contact kill?
    Just worried they won't die because I directly spray one and it didn't die just wanted to run away but a little slow.
    A

    Talstar P does not provide an instant knockdown of pests, rather, pests pick up the residual active ingredient by contact.  It works by disrupting an insect's nervous system, causing a weakened state followed by death.

    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
Displaying 481 to 500 (of 1250 questions)