Talstar P Professional Insecticide - Questions & Answers

Displaying 901 to 920 (of 1250 questions)
Sort:
  • Asked by Chance from Orlando
    05/14/2017
    Q
    Will Talstar P control, repel, or kill aquatic midges?
    Wil this control, repel, or kill aquatic midges(non biting), gnats, blind mosquitoes? Will this product stain or damage exterior house paint?
    A

    Talstar P will midges and mosquitos that contact a treated surface long enough to receive a lethal dose.  It will dry clear and will not harm pait or surfaces when used as directed on the product label.

    Was this answer helpful to you?   Yes No
    1 of 5 people found this answer helpful.
  • Asked by Audrey from Candler
    05/19/2017
    Q
    Would Talstar P be safe for use on horses for flies and gnats?
    The flies seem to be especially bad.
    A

    Talstar P (Talstar One) is NOT labeled to kill horse flies or for use in pastures containing grazing animals and is NOT labeled for use on horses. We do offer  Permethrin SFR 36.8%  and it is labeled for use on livestock such as horses and cattle as well as other animals. We have listed the specifications for horses below but you can find more information on the product label.

    For use on Horses to control: Horn flies, face flies, stable flies, house flies, horse flies, black flies, eye gnats, mange mites, scabies mites, ticks, lice and fleas: Use ¼ fl. oz. to 1 pt. water, 0.6257% AI. Low pressure spray. Application: 1-2 fl. oz. spray per animal. Spot treat back, face, legs tail and ears.

     

    Was this answer helpful to you?   Yes No
    1 of 2 people found this answer helpful.
  • Asked by Richard from Sanford, Nc
    06/06/2017
    Q
    Can I use Talstar in a house that is under construction?
    I was wondering if that will be OK since no one is there at night and it would be dry by the next day when workers returned?
    A

    Yes, that will be fine. Everyone will need to be out of the area while Talstar is being applied, but it will be safe for them to return as soon as everything is dry (usually 1-2 hours). 

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Riya from Chennai
    06/20/2017
    Q
    Where is Talstar Pro manufactured?
    A

    Talstar P is manufactured in New York.

    Was this answer helpful to you?   Yes No
    1 of 3 people found this answer helpful.
  • Asked by Rick from Burlington, Nc
    06/22/2017
    Q
    Is it ok to use Talstar granulars or Talstar P (Talstar One) on boxwoods?
    A

    Talstar P (Talstar One) would be a great choice for applications on boxwoods. Talstar granules can be applied in the lawn and watered in for 2-4 months of coverage. Please provide the targeted pest for additional information.

    Was this answer helpful to you?   Yes No
    1 of 2 people found this answer helpful.
  • Asked by Willie from Fort Worth, Tx
    07/01/2017
    Q
    What granule or liquid can I use to get rid of lawn pests?
    Such as sod grub worms, chinch bugs, mosquitoes in the grass? Fleas and ticks as well. You can't enjoy being outside. I have a lawn sprinkler system.
    A

    Talstar P (Talstar One) can be used for everything except grubs if you have those and not sod webworms.  For grubs you would need a product like Merit in granule or liquid form.  For mosquitoes the key is applying Talstar to the underside of leaves of trees and bushes.  For fleas and ticks as well as mosquitoes you can also add an insect growth regulator like Nyguard IGR.  

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Kerri
    07/19/2017
    Q
    Do you sprayed Talstar P on the leaves and stem or soak it into the roots?
    A

    Talstar P (Talstar One) would be applied to foilage and stems.

    Was this answer helpful to you?   Yes No
    1 of 2 people found this answer helpful.
  • Asked by Ed from Bartlett, Il
    08/02/2017
    Q
    What does .012 percentage of Talstar mean? How many ounces per gallon is that?
    A

    The 0.12 percentage of Talstar could vary depending on how many gallons the company mixed up.  Per the product label it could equal 0.19 - 0.2 fl oz.

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Mai from Cedar Park, Tx
    08/08/2017
    Q
    Where is Talstar P (Talstar One) made?
    A

    Talstar P (Talstar One) is manufactured in the US by FMC. They are located in New York.

    Was this answer helpful to you?   Yes No
    1 of 2 people found this answer helpful.
  • Asked by Dick from Manassas
    08/28/2017
    Q
    What is the recommended insecticide to use on European hornets which have infested a lilac bush?
    A

     Tempo 1% dust is the most effective dust to treat for hornets and yellow jackets. Be sure to treat in the times of the day when they are less active (earlier morning or later evening). You may also want to use a ready-to-use knockdown insecticide such as PT Wasp Freeze II. This spray will spray up to 15 away for safe and quick knockdown of flying, stinging insects.

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Tony from Montgomery, Tx
    08/31/2017
    Q
    Will Talstar P penetrate a St Augustine lawn to eliminate sod webworms?
    I will be using a handheld pump up sprayer.
    A

    Yes, Talstar P is great for this insect and applied late in the day, since they are active at night. Please take a few moments to review our treatment article on How to Get Rid of Sod Webworms for a successful application.

    Was this answer helpful to you?   Yes No
    1 of 3 people found this answer helpful.
  • Asked by Ann from Seagrove, Nc
    09/23/2017
    Q
    What are the ingredients in Talstar for bed bugs?
    A

    The active ingredient in Talstar P is bifenthrin. When treating for bed bugs, a thorough application should be made to crack and crevices where evidence of bed bugs occurs. This includes bed frames, boxsprings, inside empty dressers and clothes closets and carpet edges, high and low wall moldings and wallpaper edges. Do not use this product on bed linens, pillows, mattresses or clothes. Remove all clothes and other articles from dressers or clothes closets before application. Allow all treated areas to thoroughly dry before use. Not recommended for use as sole protection against bedbugs. If evidence of bedbugs is found in/on mattresses, use products approved for this use. The mixing rate of Talstar P is 1 fl oz per gallon of water. Be sure to do treatments every 10-14 days until you do not see activity for 30 days. 

    Please check out our Bed Bug Guide for tips on how to treat and prevent bed bugs in the future. 

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Marjorie from Monroe
    09/24/2017
    Q
    Can I mow my lawn before an application of Talstar P (Talstar One)?
    A

    It is recommended that you wait at least 24 hours after mowing to apply Talstar P (Talstar One).

    Was this answer helpful to you?   Yes No
    1 of 5 people found this answer helpful.
  • Asked by Mike from Charleston, Sc
    09/28/2017
    Q
    What are the mixing instructions for mosquitoes applied with a Stihl sr 200 mister blower using Talstar P?
    It would take me 3 hours to apply 1 gallon (1 oz of Talstar p) over 1000 sq ft.! I called customer service and they were baffled by my question.
    A

    Talstar P should be mixed at 1 fl oz per gallon of water per 1,000 sq ft. We have never experienced an application taking 3 hours on a 100 X 10 or 50 X 20 area using a mist blower. Please take a few moments to review our treatment article on How to Get Rid of Mosquitoes for a successful eradication program. Please let us know if you have additional questions or concerns.

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Renee from Fort Mill, Sc
    09/08/2014
    Q
    How much Talstar P should you mix to spray in your lawn?
    What is the recommended mixture for lawn pests, such as mole crickets??
    A
    You will mix 1 fl. oz. of Talstar P (Talstar One) per gallon of water for general pest control. For mole crickets, applications should be made as late in the day as possible and should be watered in with at least 0.5 inches of water immediately after treatment. If the lawn is not moist before treatment, it is recommended that you irrigate the lawn to bring the mole crickets to the surface.  Please let us know if you have any additional questions.
    Was this answer helpful to you?   Yes No
  • Asked by Clarke from Barbados
    09/10/2014
    Q
    Should Talstar PL be used in an enclosed office with no windows, just air condition vents?
    A

    When applying Talstar P, as long as the area has had time to dry, there should not be any concern. Rooms should remain vacant until the product has had time to dry. Talstar P is ok to use as crack and crevice treatment along baseboards, corners, storage areas, closets, around water pipes, doors and windows, attics and eaves, behind and under refrigerators, cabinets, sinks, furnaces, stoves, the underside of shelves, drawers and similar areas.

    Was this answer helpful to you?   Yes No
  • Asked by Rick from Pennsylvania, 15431
    09/10/2014
    Q
    Can I use Talstar P on siding and will it kill stink bugs?
    A
    Yes, Talstar P (Talstar One) can be used on siding. It is also labeled to kill stink bugs as well as various other pests. You will use 1 fl. oz. per gallon of water. Please let us know if you have any additional questions.
    Was this answer helpful to you?   Yes No
  • Asked by Rose from Clifton, Virginia
    09/13/2014
    Q
    Do I open both caps and seals? Do I squeeze the container to get the solution to the measuring chamber?
    A
    Yes, to utilize the Talstar P bottle, you will need to remove both caps and both seals below the caps if there are some there. (some products come with them, some don't) Once that process is finished, replace the cap over the larger portion of the bottle and then squeeze the bottle itself. This will cause the solution to run up the straw like tube on the side of the bottle and into the measuring reservoir for you to know exactly how much you need per gallon of water. 
    Was this answer helpful to you?   Yes No
  • Asked by Brian
    09/15/2014
    Q
    Is the residual harmful to humans?
    If Talstar works by creating a residual that the bugs come in contact with and eventually die, won't that same residual, for example, if applied to a fence that my young kids touch, negatively affect them? Yes, I already understand that it is odorless and clear, but I was thinking about the residual and how it must also be absorbed by humans when they touch the same sprayed surfaces over the subsequent 3 month before reapplying.
    A
    No, Talstar P (Talstar One) is not harmful to humans if they come in contact with it after it is dry. It will not affect children if they touch the fence because it is none irritating if it touches the skin. It is recommended for children to not be in the area until the product is completely dry. Please let us know if you have any additional questions.
    Was this answer helpful to you?   Yes No
    0 of 2 people found this answer helpful.
  • Asked by Mrs. from Deer Park, N.y. 11729
    09/19/2014
    Q
    need to get rid of crickets in my home.
    tthey appear on occassion
    A
    Talstar P is labeled for crickets and can be used inside and outside the home. Indoors as a crack and crevice treatment it provides a 90 day residual. When Talstar P is applied outdoors as a perimeter treatment or as a broadcast treatment, it will leave a 30 day residual. Talstar P is labeled for over 75 types of insects and is a great product for general pest control. 
    Was this answer helpful to you?   Yes No
Displaying 901 to 920 (of 1250 questions)