Talstar works great for mosquito control and it can be used in your mister. The key is to apply it to all shrubs, trees, and other foliage around the house or where you are trying to provide relief. It should be directed not only on top of the leaves and plants, but on the underside of the leaves as well which is where the mosquitoes hang out during the heat of the day. Talstar should be applied every 30 days for optimum control.
The mixing ratio for mosquitoes is 1 fl oz per gallon of water.The key is to apply the Talstar P it to all shrubs, trees, and other foliage around the house or where you are trying to provide relief. It should be directed not only on top of the leaves and plants, but on the underside of the leaves as well which is where the mosquitoes hang out during the heat of the day. Talstar P should be applied every 30 days for optimum control. Please see our Mosquito Treatment Guide for more tips.
Yes, Talstar is labeled for ants and can be used indoors. You may want to look over our Ant Control Guide for more information on treating this pest.
It would be recommended to steam clean the carpets to remove any Talstar P residual as it is not labeled to be broadcasted on carpets.
Talstar P (Talstar One) is a non-staining product that should not be applied to wood floors only cracks and crevices as directed indoors.
Talstar P (Talstar One) is not directly labeled for maggots for the common house fly, but it would help with the maggot control as it would cause the fly population to decrease rapidly. It should be mixed at 0.5 to 1.0 oz. per gallon of water and applied on the exterior of the home focusing around windows, doors, areas of direct sunlight and where you notice the flies congregating. Using a fly bait trap such as the Flies Be Gone Trap to draw the flies away from the home is also recommended.
Talstar P (Talstar One) is not labeled for parasites. We apologize but we do not carry anything for for intestinal parasites/parasites.
When using Talstar P for mosquito control, it’s best if you can treat the underside of the tree leaves as high up as possible. The more surface you’re able to treat, the more effective your treatments will be.
Permethrin SFR and Talstar P should not be mixed together. You would use one or the other.
One of our most popular general use products is called Talstar. It is widely used by pest control companies because it is labeled for almost every insect you could have a problem with including roaches and ants. This product can be used inside and outside of the home, it is odorless, dries clear and very safe for use around children and pets. It is a liquid concentrate that you mix with water in a one gallon hand pump sprayer. The mix rate is 1 oz per gallon of water. It will last for 90 days indoors and 30 days outdoors.
Talstar P will kill stinkbugs. You should dilute one ounce of Talstar P per gallon of water. You will use a hand pump sprayer to apply the solution on all door frames, window frames, areas where utilities (cables, pipes, wires) enter into the structure, a band of soil 6 to 10 feet adjacent to the structure, also to a height of 2 to 3 feet on the foundation where pests may be active or may find entrance. As the stink bugs crawl over the treated area, they will receive a lethal does of the insecticide and usually die within a few hours. You should treat every month starting in August and ending in November for best results. It is also labeled for Asian beetles aka lady beetles and should do a good job.
You can help prevent gnats from entering you home by spraying a barrier application of a product like Talstar, Tempo, Demand, or Suspend, paying special attention to window frames, window screens, door frames, and cracks and crevices that may be used as points of entry. A screen with a very fine mesh (smaller than 16mesh) will help prevent entry. Additionally it may be helpful to keep ceiling fans and window fans on at high speeds to keep insects out of small areas. You may want to look over our article on Getting Rid of Gnats for more information.
If gnats have already entered your home and you need immediate control use Microcare, P.I. Aerosol, Cy-Kick Aerosol or EcoPco ACU. These products offer fast knockdown and kill of flying insects giving you immediate relief.
Talstar P Professional Insecticide can be used as a spray for general pests over the trench as the termites would not be affected by it since they are below the soil. It will have no effect on the treated soil. We have a great guide for treating mosquitoes here.
Yes, Talstar P can be used for both ticks and mosquitoes.
Neither ExciteR or Talstar are true repellents to keep insects away. The area will only be slightly repellent for maybe a day after an application with these. Talstar is designed more to provide a long residual to continue to kill those insects that contact a treated area. Mosquito Barrier is an option that can be repellent for up to 24 hours or up to 30 days.
Since Talstar P is labeled for use indoors as a crack and crevice spray, you could potentially use it to spot treat in a drop ceiling, however this product is not labeled for carpet beetles. We recommend adding an Insect Growth Regulator (IGR) when treating for carpet beetles, such as NyGuard IGR. You could also use a ready-to-use product like NyGuard Plus which has both an insecticide and an IGR in one product. A better choice for use in the drop ceiling may be an insecticide dust, though, since it is a dry product that would not damage the tiles, and a dust lasts much longer than a spray in void spaces like a drop ceiling. Delta Dust can be used in a drop ceiling for carpet beetles and other crawling insect pests there. Or you may consider our Carpet Beetle Control Kit which includes the NyGuard Plus, CimeXa Dust, and glue traps.
Be sure that you have located and removed the source of the infestation as well. We have more tips in our Carpet Beetle Treatment Guide here.
Talstar P Professional Insecticide cannot be applied to linens or fabrics.
