Talstar P Professional Insecticide - Questions & Answers

Talstar P is labeled for gnats and should do a great job for you. You can use Talstar P as a broadcast spray over your lawn, concentrating in areas where see a lot of activity. Talstar P will not keep new gnats away, but it should eliminate the gnats that land of the treated surface.

Ground bees, also known as digger bees, can be very difficult to control no matter what product you use and they most likely will come back to your property year after year unless you do your part to alter your property to make it unfavorable to the bees. Ground bees prefer dry soils with thin grasses so irrigating the area frequently and correcting any issue that causes your grass to be thin will help deter the bees from nesting. In areas where you do not have grass, a layer of mulch will help deter the bees from nesting. Ground bees are solitary bees and are not very aggressive and are known to be a beneficial insect which is why you will not find any products specifically labeled for this type of bee. Talstar P can help provide some level of control but it will not get rid of all of the ground bees on your property. You should use Talstar P at a 1 oz of product to 1 gallon of water for a 1,000 sq ft area ratio. This will give you the fastest knockdown and the longest lasting residual. Talstar P does not offer an instant knockdown but will kill insects that come into contact with treated areas over a short period of time.

We are not sure exactly what you are describing....it could be any number of things.  Springtails is what we are thinking of first, but cannot be sure.  Either way, we would recommend Talstar P.  Talstar P is our most popular pest control product and it is very safe to use as well. 

Chiggers are not known to infest structures and are most likely outdoors in your yard. Both Talstar and Onslaught are top-notch professional products and both are labeled for chiggers. Onslaught is micro-encapsulated and will last a little longer on outdoor surfaces which does give it a bit of advantage over Talstar P. Treatments for chiggers should begin in May and could need to continue through the summer as new chiggers move into the area. Treating the entire lawn is of little benefit because chiggers avoid direct sunlight and normally will not infest areas that are mowed or otherwise well maintained. Focus treatment on the unkempt areas of the lawn and lawn edge. You can also use Onslaught to do a barrier treatment around the outside of your home and in your crawl space to stop pests from moving indoors.

Talstar P mixed with an Insect Growth regulator such as Nyguard IGR would be a good choice for tick control. Talstar P would work to kill ticks that come into contact with treated surfaces while the Nyguard would work to help stop juvenile ticks from reaching sexual maturity. You should remember that ticks may be hidden in tall or dense brush so higher treatment volumes may be needed to treat the entire plant, not just the top side of the plant where it is easiest to spray. You should try to get the application on the underside of leaves and all the way to the bottom of the plant. We recommend treating the entire infested area (no spot treating). When you are dealing with an area that has a high tick population you may be required to treat once a month from spring through to the first frost, no matter what product you use. Be sure all pets are treated with a product labeled for tick control. The problem on your property may be that ticks are being reintroduced into the area on a consistent basis by wildlife such as deer, raccoons or birds. You will be required to use non-chemical means to reduce the tick population in addition to insecticides. As with most pests you can modify the environment on your property to make it less favorable to ticks. Keeping grass and weeds cut short in tick infested areas increases tick death during hot weather, discourages wildlife and will reduce the amount of vegetation which may need a pesticide application to kill ticks. Clear away yard debris such as old firewood or leaf piles. Remove old or abandoned bird nests and rodent nests. Patch fences where wildlife may be gaining access to your property. It may also be helpful to have the ticks identified. By identifying the type of ticks you can better understand what type of animals may be bringing them to your property and you can modify the environment to make it less favorable for that host animal. You can contact your local cooperative extension office to request an insect identification.

While the product will not hurt the carpet, Talstar P is not labeled to be broadcast sprayed over carpeted areas for carpet beetle control. Talstar P can only be used as a crack and crevice application indoors. For indoor carpet beetle control you may want to consider a product such as Nyguard Plus. This product contains an insecticide to kill the roaming adults and an insect growth regulator to stop the harder to kill immature beetles from reaching a reproductive state which in turn will break the cycle of infestation. As an added bonus this product also contains a deodorizer for carpet applications.

Talstar can be used in a backpack sprayer or a mist blower like the Solo 451 but it cannot be used in any type of fogging equipment. Please take a look at our Fogging Concentrates to see if any of these might be more suited to your application needs.

Yes, Talstar P is labeled for bees. If the honey bees contact the product they will be eradicated.

Talstar P will kill the ants that come in contac with the treated area. To eradicate the colony, we would recommend to use a product like Phantom kills by transfer, so they walk right over it and then spread it to other insects hidden behind walls or in their home colony, killing every other pest they come in contact with

Yes, Talstar P Professional Insecticide can be applied to any bushes, shrubs, trees, landscaped areas as well as flowering plants. However, you should minimize the spray on the actual flowering plants as you do not want it to expose the product to any bees that help with pollination. It is recommended that you spray when pollinators are not active, either in the early morning or late evening.

Talstar is a great general pest control product that can treat for over 75 insects listed on the label including spiders and ants. Talstar is odorless, dries clear, leaves no stains, is non-irritating, and will not break down easily with rainfall.

You will need to use 1 ounce of Talstar P per gallon of water for mosquito control.  Thank you for your order.  We appreciate your business! 

Yes, Talstar P (Talstar One) is labeled for caterpillars.

Yes, there is a product called Bifen IT, whch is the generic version of Talstar P.

Talstar P is the #1 recommended product for bagworm control. TalstarP is known to have a very low toxicity for mammals making it safe to use around people and pets. Please visit the Talstar P product page where you can review the product label as well as the MSDS. Talstar P applications should start in April and continue monthly through June for bagworm control. Be sure foliage is sprayed thorughly to the point of runoff to achieve adequate coverage. You will mix 1 oz per gallon of water per 1,000 sq ft once a month.

Talstar P can be mixed at 1 oz per gallon of water and be applied once a month to the exterior of the structure. We do not recommend applying it to any furniture. We suggest applying it to all non-edible shrubery and the tree foliage (especially targeting the undersides of the leaves). You can spray around window frames, door frames, the siding and lawn.

Although Talstar P is not a systemic insecticide, we would not recommend spraying on fruit trees or around the root systems of fruit or other trees from which you plan to eat the vegetation. We do carry many products that are labeled for use on or around fruit trees, depending on what type of tree you are treating and for what pest. We are happy to make a recommendation with more information about your specific situation. You may reach our Customer Service staff at 866-581-7378 M-F 9a-5p EST.

Talstar P is a liquid concentrate insectide which contains bifenthrin, a synthetic pyrethroid. Pyrethroids works by disrupting an insect's nervous system causing a weakend state followed by death. Talstar P does not provide an instant knockdown of pests, rather, pests pick up the residual active ingredient by contact, Talstar P is a repellent insecticide since it acts quickly enough that social insects such as ants cannot create a pheromone trail. This mean that Talstar P will be most effective as a barrier with a thorough application. Talstar P residual last up to 3 months. 

On average, 1 gallon of mixed solution of Talstar P will cover about 1000 sq/ft, so it would take you about 44 gallons to cover an entire acre at the mix rate of 1 oz per gallon of water. The 1 gallon concentrated will make 128 gallons of finished solution at this rate and will treat the acre approx 3 times.

Talstar is not designed to be used in a fogger of any sort, only sprayers or large mist blowers like a Solo 451. Using Talstar or any other insecticide not designed for a fogger could clog your equipment or lower the efficacy of the product as the ingredient are not designed for this type of application. You may want to consinder some of our Fogging Concentrates to see which best fits your needs and type of fogger. Please let us know if you have any other questions.