Since Temprid FX Insecticide is not to be applied on surfaces that come in contact with the skin or on the surface area of the couch, only to the tufts,folds and seams, we would recommend contacting Bayer directy for instructions on the treatment/cleaning of the couch and chair. Bayer can be reached at 800-331-2867.
Temprid FX Insecticide should not be applied during rain. It could be washed away before having time to dry. It is recommended to treat when you are not expecting rainfall within 24 hrs. It will offer a 30 day outdoor residual.
Yes, Temprid FX Insecticide is a great product for springtails. Depending on how healthy the springtail is and how long it spends on a surface treated by Temprid, will depend on how long it actually takes for each individual one to die. It could be hours or even a day. Also, if you are not treating the main nest and only the satellite colony, you are only temporarily fixing your problem. More will appear as they continue to migrate and you will need to fix the moisture issue in your home that is attracting the springtails as well. Until the moisture is gone or the main nest is found and eliminated, you will have an ongoing battle with the pest.
Please view our How to Get Rid of Springtails Guide for more information.
Temprid FX Insecticide se diluye a una porci
Temprid FX Insecticide is not labeled to control armyworms. We would recommend Bifen XTS for armyworms in lawns, landscape beds and ornamentals.
Please view our Armyworm Treatment Guide for more information.
Apply Temprid FX Insecticide at a rate of 8 mL to 1 gallon of water and apply to tufts, seams, folds, and edges of furniture, mattresses, couches, and chairs until moist. Allow to dry before remaking bed or allowing anyone to sit on the furniture. Apply to bedsprings, box springs, and the interior of bed frames or headboards, including all cracks and joints. If treating for bed bugs in upholstered furniture, apply only to the infested tufts, seams, folds, and edges, but do not apply to flat surfaces where prolonged human contact will occur.
Please view the product label for more information and save for reference if needed.
Temprid FX is mixed at 8 ml to 16ml per gallon of water depending on the target pest and where you are treating (indoors/outdoors).
Please refer to the product label for full instructions on application.
We would recommend vacuuming along baseboards and wiping any residue in other areas where Cimexa was previously applied before spraying with Temprid FX Insecticide.
Once the Temprid FX application has full dried, then you can reapply Cimexa Dust using a bellow hand duster along the same baseboards but also around electrical outlest, around windows, doors, and in wall voids.
Please take a moment to view our How to Apply Cimexa Dust Video and How to Apply Temprid FX Video for more information.
Temprid FX Insecticide can be used in hand pump and backpack sprayers as well as mist blowers, but is not labeled for applications with any type of ULV or Thermal Fogging equipment.
Temprid FX Insecticide is not labeled to treat grubs. Please take a few moments to review our article on How to Get Rid of Grubs for the best results.
Temprid FX Insecticide uses two active ingredients for a dual mode of action for insects. Once the bed bugs have crossed the treated area, the beta Cyfluthrin and Imidacloprid start working together immediately to attack the nerves and stop normal nerve transmittal signals throughout the the insect. The exact kill time of how long it takes, we are not able to determine. It may take a few hours up to 24 or more depending on a few factors.
Bed Bugs do require a combination of products to fully eradicate and repeat treatments every 7-10 days until you can go 30 days without seeing any signs of bed bugs, bites or skin casings. Please review our How to Get Rid of Bed Bugs Treatment Guide and Bed Bug Kits for all the necessary products to eradicate.
You can vacuum when the application of Temprid FX Insecticide has completely dried.
It is normal to still see roaches once treatments begin using Temprid FX. This insecticide contains two active ingredients that offer a quickdown but also a non repellent residual that goes undetected as roaches cross the treated areas. This non repellency quality allows roaches to transfer the active ingredient throughout the colony.
Eliminating roaches is not a quick treatment depending how severe the infestation is. Repeat treatments will be required and Temprid FX should not be the sole product used. When dealing with a roach infestation, you will need to be sure to eliminate the food and water source for the roaches and use an insecticide (Temprid FX), a roach gel bait, and an insect growth regulator (IGR) labeled for roaches to completely eradicate the population.
Please take a moment to review our Roach Control Kits and Treatment Guide for step by step instructions on how to eliminate a roach infestation.
Temprid FX does not release toxic vapors or fumes into the air. You would only need to throw away food or wash utensils if any came in contact with the product.
One gallon of prepared Temprid FX Insecticide solution treats roughly 1,000 sq ft mixed at 8ml to 16ml per gallon of water.
If you have gotten Temprid FX Insecticide or any insecticide on your skin, the proper steps are to immediately take off contaminated clothing and shoes. Wash off immediately with plenty of water for at least 15 minutes. The product label advises that to contact a physician or poison control center immediately and be sure to let them know you also inhaled the product for assistance.
Please have the product label and SDS Sheet available for additional safety information on the product.
No, it is recommended to apply Temprid FX or any liquid insecticide prior to applying any type of insecticide dust. Once the liquid spray application has dried, you can follow behind and apply the insecticide dust or DE.
Dust applicaitons are best applied using a Hand Duster to reach deep into cracks and crevices along baseboards, under cabients, behind outlets, around plumbing and other inaccessible areas.
View our How to Apply Dust Video for more information.
Temprid FX Insecticide is a concentrate that does need to be mixed with water but only as a foliar spray as directed. It cannot be used as a systemic drench. If you tell us what you are treating for, we can make a recommendation of a systemic drench to fit your needs.
Temprid FX Insecticide cannot be applied to countertops/backsplashes. Per the product label to treat for listed indoor pests: treat entry points, such as around water pipes, doors, windows, and eaves. Treat areas where pests normally feed or hide, such as baseboards, corners, around water pipes, behind or under refrigerators, cabinets, sinks, and stoves.
You are correct, Temprid FX Insecticide cannot be applied to carpets, rugs, floors, etc as a broadcast application. Unfortunately, we will need to know what pest you are treating for in order to accurately answer that question and provide the best option for you. Please contact us at support@domyown.com or by calling 1-866-581-7378 Mon – Fri 9am to 5pm EST and a represenative will be glad to make the best recommendation for your needs.
