Apply Temprid Ready To Spray when pests are seen or found. Reapply every 7 to 10 days until infestation is eliminated.
Crack and crevice treatment: Inject into cracks and crevices or void spaces where insects may be harboring, living, and breeding. Place injector tip into cracks, crevices, holes, and other small openings. In light infestations or maintenance treatments, move the injection tube along cracks and crevices at the rate of 1 linear foot per second. For heavy infestations or clean-out treatments, move the injection tube along cracks and crevices at the rate of 6 inches per second. In enclosed void spaces, after calculating the void's cubic area, apply at a rate of 2 seconds per cubic feet. Several holes may be required in long-running voids.
Spot treatment: Hold nozzle between 12 to 18 inches from the surface to be treated. Release product at a rate of 4 seconds per 2 square feet. Each spot treatment must not exceed 2 square feet.
Please also take a few minutes to read over our clothes moth article to learn what you need to do to be successful in your treatment.
Temprid Ready To Spray is a ready-to-use aerosol of Temprid FX that comes in a new and convenient can using Bag-on-Valve technology. The benefit of this is that the can completely empties, so product does not go to waste. However, the tradeoff is that the can must be shaken quite vigorously before and during the application in order for the can to continue spraying.
Temprid Ready To Spray is not restricted in Washington state and can be shipped there.
Temprid Ready Spray is not labeled to be applied to electronics. You can try wiping any residue off with damp towelette. For electronics, we recommend sealing them in bags or containers with Nuvan Strips.
Temprid Ready Spray only has a slight odor when sprayed. Temprid SC or FX concentrates generally have even less odor, especially once dry. You can open windows and turn on fans to help move the air around. If you have an odor of which you are unable to identify the exact source, then you can use Earth Care Odor Remover Bags for general area treatment.
Temprid Ready Spray could only be used in around the window frame in cracks and crevices. We would recommend turning the unit off until the area has dried.
Temprid Ready Spray has the same active ingredients as Temprid SC, however, there are less due to it being a different formulation. Temprid Ready Spray will last for approximately 30 days indoors once applied. Temprid SC will last about 90 days indoors once applied. They can both be applied to the tufts, folds and seams of your mattress.
Temprid Ready Spray cannot be applied on the entire surface of the bed, only listed cracks and crevices, tufts, folds and seams of the mattress. We do offer Steri-Fab that can be applied. Please take a few moments to review our article on How to Get Rid of Bedbugs for a successful program.
Temprid Ready Spray has a residual of up to 6 months. It cannot be used as a broadcast across floors or shelving but instead should be directed to the cracks and crevices around the rooms and edges of shelving only.
Temprid Ready Spray is not labeled for use on backpacks or any items that would have prolonged contact with a person and is primarily used as a crack and crevice spray. Most of our customers when traveling or trying to protect items such as backpacks, briefcases and carry on luggage will use Rest Easy Bed Bug Spray. It acts as a contact kill, residual and repellent for your belongings and is safe to be sprayed across your entire backpack.
It is important for the bedbug eggs to be sprayed directly. The young nymphs will be eradicated by the dried residual of the product after it is applied. There is not a specific time. We recommend that you treat once a week for bedbug control until you have gone 30 days without bites. Below I have included a guide that offers some really helpful information including other products that will be great to use for treatment.