Tenacity Herbicide - Questions & Answers

Displaying 301 to 320 (of 611 questions)
Sort:
  • Asked by Scot from Harrisburg, Pa
    06/13/2018
    Q
    Did I just kill my garden plants by spraying them with Tenacity Herbicide?
    I have a lot of ornamental (sea) grasses, and just sprayed Tenacity over all my beds, in an effort to suppress an overgrowth of weeds. I also have seedling Crepe Myrtle bushes. Should I be worried, and is there anything that will counter-act Tenacity on a mis-sprayed plant?
    A

    Tenacity Herbicide should not be used around or on desirable ornamentals and/or trees or used within 3 feet of trees or ornamentals.  Unfortunately, there is not a product that can be used to reverse the effects of the Tenacity sprayed on intolerant plants. 

    Was this answer helpful to you?   Yes No
    4 of 5 people found this answer helpful.
  • Asked by Kevin from Sc
    07/15/2018
    Q
    Does Tenacity kill nimbleweed?
    A

    Tenacity Herbicide is labeled for post-emergent control of Nimbleweed to established cool season turf. Per the product label, you may need a second application after 2 to 3 weeks. Apply to young, actively growing weeds, and be sure to use a surfactant such as Southern Ag Non-Ionic surfactant for post-emergent applications.

     

     

     

    Was this answer helpful to you?   Yes No
    4 of 4 people found this answer helpful.
  • Asked by Nike from Michigan
    08/06/2018
    Q
    Will Tenacity Herbicide affect any other cool season grasses?
    I sprayed to kill bentgrass and it has worked but I believe it turned some of my other grass, like fescue white as well.
    A

    Tenacity Herbicide may cause temporary whitening of turfgrass foliage. In general, symptoms appear five to seven days after application and last for several weeks. A repeat application to the same site causes less whitening of the plant tissue.

    Was this answer helpful to you?   Yes No
    4 of 4 people found this answer helpful.
  • Asked by Larry from Cowlesville, Ny
    08/09/2018
    Q
    For spot spraying crabgrass with Tenacity Herbicide, can a dye be used?
    A

     

    Tenacity Herbicide would be a great option for you to control crabgrass, and yes it is advised to use a dye like Turf Mark Blue with it so you can make sure to not overlap if you plan to do a broadcast application on the property. 

    Was this answer helpful to you?   Yes No
    4 of 5 people found this answer helpful.
  • Asked by Nike from Michigan
    09/05/2018
    Q
    Can Tenacity Herbicide be used to treat bentgrass on new cool-season grasses I planted about 3 weeks ago?
    A

    You will want to wait until the newly germinated turf has been mowed two times or four weeks after emergence (whichever is longer) before making a postemergence application with Tenacity Herbicide to the new cool season turf. For the most effective Bentgrass control, you will need to reapply Tenacity Herbicide at two to three-week intervals for up to three applications. Be sure to apply with a NIS surfactant. Making applications in late summer/early fall just before new growth is very effective in controlling bentgrass. 

    Was this answer helpful to you?   Yes No
    4 of 4 people found this answer helpful.
  • Asked by Henry from Schenectady, New York
    10/12/2018
    Q
    Can Tenacity Herbicide be applied with a hose-end sprayer?
    A

    It is not recommended to use a hose-end sprayer to treat your lawn with Tenacity Herbicide or any other herbicide. The problem with using hose-end sprayers is that they are not very accurate and you can wind up dispensing more or less product than recommended per area and that can lead to less than desirable results.

    Was this answer helpful to you?   Yes No
    4 of 4 people found this answer helpful.
  • Asked by Allen
    11/30/2018
    Q
    Can Tenacity be applied to Kentucky Bluegrass to control invasive fescue?
    I had some bugs and or mold kill small patches of the lawn. Fescue grew in and filled those bare spots. Will tenacity kill the invasive fescue? Can Tenacity be applied in the winter or fall as a pre-emergent?
    A

    Tenacity Herbicide is labeled for use on Tall Fescue, Kentucky Bluegrass, Centipedegrass, Buffalograss, Perennial Ryegrass, Fine Fescue, St. Augustine Grass, so no it will not kill the fescue in your Kentucky Bluegrass lawn.  Tenacity is a systemic pre-emergent and postemergent herbicide for the selective contact and residual control of weeds in turfgrasses. When applied as a pre-emergent, Tenacity Herbicide should be applied before soil temperatures reach 55 degrees. 

    You can spot treat the fescue with a non-selective herbicide such as Killzall and reseed with bluegrass.

    Was this answer helpful to you?   Yes No
    4 of 6 people found this answer helpful.
  • Asked by Rivk from Augusta County, Va
    03/12/2019
    Q
    Can I use Tenacity as a preemergent on crabgrass and nimblewill?
    A

    Tenacity is labeled as a pre and post emergent for crabgrass but only as a post emergent for nimblewill. The most effective product to control nimblewill pre-emergently has been removed from the market (MSMA). We have had a lot of folks report that Dimension does a pretty good job pre-emergently but since the product is not technically labeled for nimblewill we cannot legally recommend it for this use. 

    Was this answer helpful to you?   Yes No
    4 of 6 people found this answer helpful.
  • Asked by Anthony from Bridgewater, Nj
    03/31/2019
    Q
    Can Tenacity be applied as a pre emergent while it is raining out?
    A

    For best results, do not apply Tenacity Herbicide when rainfall is forecasted to occur within 48 hours.

    Was this answer helpful to you?   Yes No
    4 of 5 people found this answer helpful.
  • Asked by Fred from Newport
    04/03/2019
    Q
    Can Tenacity be used for Nimblewill?
    A

    Tenacity Herbicide is labeled for application for post-emergent control of Nimbleweed to established cool season turf. Per the product label, you may need a second application after 2 to 3 weeks. Apply to young, actively growing weeds, and be sure to use a surfactant such as Southern Ag Non-Ionic surfactant for post-emergent applications.

    Was this answer helpful to you?   Yes No
    4 of 4 people found this answer helpful.
  • Asked by Tom from Michigan
    04/06/2019
    Q
    Does the soil have to be above a certain temperature to use Tenacity?
    A

    Tenacity Herbicide may be applied when soil temperatures are around 55 degrees or higher for post emergent control.  If you are using a pre-emergent you would need to apply before soil temps reach 55 degrees.

    Was this answer helpful to you?   Yes No
    4 of 4 people found this answer helpful.
  • Asked by John from Farmington, Mi
    04/11/2019
    Q
    Looking to spray Tenacity for creeping Bentgrass, what is the best temperature to spray?
    it is spring here in MI - temperatures fluctuating between 50-60 degrees. Would it be okay to spray this product at these temps for creeping Bentgrass?
    A

    The best temperature range to apply most herbicides, including Tenacity, is between 65-85 degrees. 

    Was this answer helpful to you?   Yes No
    4 of 5 people found this answer helpful.
  • Asked by Christina from Kirkland
    06/22/2019
    Q
    Can Tenacity Herbicide and a non ionic surfactant be applied in a mist blower/fogger?
    A

    Tenacity Herbicide should not be applied in a mist blower/fogger. It can be applied with a hand pump sprayer or backpack sprayer for more accurate applications to the listed turf.

    Was this answer helpful to you?   Yes No
    4 of 5 people found this answer helpful.
  • Asked by Cheryl from Wilmington, Nc
    06/18/2014
    Q
    Is 90 degrees too hot to apply Tenacity to a St. Augustine lawn.
    A
    We do not recommend applying herbicides including Tenacity Herbicide in temps over 90 degrees.
    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Jim from Northern Virginia
    04/13/2015
    Q
    I have what a landscape person called Rough Stalk Bluegrass, a Canadian Hybrid or Poa Trivilais.
    There are patches in my yard that have a bright greenish color. It really stands out. Will Tenacity take care of this.
    A
     Tenacity Herbicide is labeled to take care of this. Be sure to mix a surfactant like Non Ionic surfactant to help promote the product to stick.  
    Was this answer helpful to you?   Yes No
    3 of 5 people found this answer helpful.
  • Asked by Jeffrey from Trumbull
    05/10/2015
    Q
    Will Tenacity damage Poa trivialis lawngrass?
    I have Poa Triv in shady areas and need to get rid of invasive creeping bent in my lawn.
    A
    The product label for Tenacity does not specify whether it would harm poa trivialis. Both bentgrass and poa annua may be sensitive to Tenacity, while Kentucky Bluegrass is listed as tolerant. Certainty Herbicide is labeled to control poa trivialis, but we are not certain if it would harm the bentgrass. The best option for you is to spot treat the rough bluegrass with RoundUp QuickPro and then reseed with the desirable turfgrass.
    Was this answer helpful to you?   Yes No
    3 of 6 people found this answer helpful.
  • Asked by Mike from Rockford, Il
    04/28/2016
    Q
    How soon after a pre-emergent appication of Tenacity can I apply a post-emergent spray of Tenacity?
    A

    After further information from the manufacturer they have verified that to making a pre-remergent application with Tenacity you will need to apply a post emergent application once you detect germination of the weed itself. Syngenta recommends to apply no more than 3 application per year. 

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by John from Clifton Park, Ny
    05/03/2016
    Q
    Is Tenacity Herbicide organic?
    A

    No, Tenacity Herbicide is not organic.

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Julie
    05/05/2016
    Q
    Does a long storage time reduce the efficiency of Tenacity?
    Tenacity worked wonderfully on my lawn when I first got it but I have stored it for approx. 3 years and the stored product does not seem to be working at all to kill weeds. I stirred it thoroughly before adding to water in sprayer. I used the recommended 1/2 tsp. per gal. of water.
    A

    Tenacity Herbicide if stored in a cool dry area will last up to 3 years. It sounds like you need to purchase fresh product. The mix rate you are using is correct.

    Was this answer helpful to you?   Yes No
    3 of 5 people found this answer helpful.
  • Asked by James from Indian Trail, Nc
    10/26/2016
    Q
    Can I now do my second round of Tenacity Herbicide on new grass?
    I got one round of tenacity on my lawn then i aerated & reseeded 3 weeks ago. I fixed some large bare spots as well. I have new grass growing, but I see more weeds and clover and Crabgrass coming back. Can I now do my second round of Tenacity on this new grass. I'm starting the win the battle looks like, but Crabgrass is still hanging in there on about 30 % of total lawn.
    A

    If you have already seeded, then you do not want to apply Tenacity Herbicide to the newly seeded turf until is has been mowed two times or four weeks after emergence (whichever is longer) before making a postemergence application.

    Was this answer helpful to you?   Yes No
    3 of 5 people found this answer helpful.
Displaying 301 to 320 (of 611 questions)